src/Doc/JEdit/JEdit.thy

more symbols;

(*:maxLineLen=78:*)

theory JEdit
imports Base
begin

chapter \<open>Introduction\<close>

section \<open>Concepts and terminology\<close>

text \<open>
  Isabelle/jEdit is a Prover IDE that integrates \<^emph>\<open>parallel proof checking\<close>
  @{cite "Wenzel:2009" and "Wenzel:2013:ITP"} with \<^emph>\<open>asynchronous user
  interaction\<close> @{cite "Wenzel:2010" and "Wenzel:2012:UITP-EPTCS" and
  "Wenzel:2014:ITP-PIDE" and "Wenzel:2014:UITP"}, based on a document-oriented
  approach to \<^emph>\<open>continuous proof processing\<close> @{cite "Wenzel:2011:CICM" and
  "Wenzel:2012"}. Many concepts and system components are fit together in
  order to make this work. The main building blocks are as follows.

    \<^descr>[Isabelle/ML] is the implementation and extension language of Isabelle,
    see also @{cite "isabelle-implementation"}. It is integrated into the
    logical context of Isabelle/Isar and allows to manipulate logical entities
    directly. Arbitrary add-on tools may be implemented for object-logics such
    as Isabelle/HOL.

    \<^descr>[Isabelle/Scala] is the system programming language of Isabelle. It
    extends the pure logical environment of Isabelle/ML towards the outer
    world of graphical user interfaces, text editors, IDE frameworks, web
    services etc. Special infrastructure allows to transfer algebraic
    datatypes and formatted text easily between ML and Scala, using
    asynchronous protocol commands.

    \<^descr>[PIDE] is a general framework for Prover IDEs based on Isabelle/Scala. It
    is built around a concept of parallel and asynchronous document
    processing, which is supported natively by the parallel proof engine that
    is implemented in Isabelle/ML. The traditional prover command loop is
    given up; instead there is direct support for editing of source text, with
    rich formal markup for GUI rendering.

    \<^descr>[jEdit] is a sophisticated text editor\<^footnote>\<open>\<^url>\<open>http://www.jedit.org\<close>\<close>
    implemented in Java\<^footnote>\<open>\<^url>\<open>http://www.java.com\<close>\<close>. It is easily extensible by
    plugins written in any language that works on the JVM. In the context of
    Isabelle this is always Scala\<^footnote>\<open>\<^url>\<open>http://www.scala-lang.org\<close>\<close>.

    \<^descr>[Isabelle/jEdit] is the main application of the PIDE framework and the
    default user-interface for Isabelle. It targets both beginners and
    experts. Technically, Isabelle/jEdit consists of the original jEdit code
    base with minimal patches and a special plugin for Isabelle. This is
    integrated as a desktop application for the main operating system
    families: Linux, Windows, Mac OS X.

  End-users of Isabelle download and run a standalone application that exposes
  jEdit as a text editor on the surface. Thus there is occasionally a tendency
  to apply the name ``jEdit'' to any of the Isabelle Prover IDE aspects,
  without proper differentiation. When discussing these PIDE building blocks
  in public forums, mailing lists, or even scientific publications, it is
  particularly important to distinguish Isabelle/ML versus Standard ML,
  Isabelle/Scala versus Scala, Isabelle/jEdit versus jEdit.
\<close>


section \<open>The Isabelle/jEdit Prover IDE\<close>

text \<open>
  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{isabelle-jedit}
  \end{center}
  \caption{The Isabelle/jEdit Prover IDE}
  \label{fig:isabelle-jedit}
  \end{figure}

  Isabelle/jEdit (\figref{fig:isabelle-jedit}) consists of some plugins for
  the jEdit text editor, while preserving its general look-and-feel as far as
  possible. The main plugin is called ``Isabelle'' and has its own menu
  \<^emph>\<open>Plugins~/ Isabelle\<close> with access to several panels (see also
  \secref{sec:dockables}), as well as \<^emph>\<open>Plugins~/ Plugin Options~/ Isabelle\<close>
  (see also \secref{sec:options}).

  The options allow to specify a logic session name, but the same selector is
  also accessible in the \<^emph>\<open>Theories\<close> panel (\secref{sec:theories}). After
  application startup, the selected logic session image is provided
  automatically by the Isabelle build tool @{cite "isabelle-system"}: if it is
  absent or outdated wrt.\ its sources, the build process updates it while the
  text editor is running. Prover IDE functionality is only activated after
  successful termination of the build process. A failure may require changing
  some options and restart the application. Changing the logic session, or the
  underlying ML system platform (32\,bit versus 64\,bit) requires a restart of
  the application to take effect.

  \<^medskip>
  The main job of the Prover IDE is to manage sources and their changes,
  taking the logical structure as a formal document into account (see also
  \secref{sec:document-model}). The editor and the prover are connected
  asynchronously in a lock-free manner. The prover is free to organize the
  checking of the formal text in parallel on multiple cores, and provides
  feedback via markup, which is rendered in the editor via colors, boxes,
  squiggly underlines, hyperlinks, popup windows, icons, clickable output etc.

  Using the mouse together with the modifier key \<^verbatim>\<open>CONTROL\<close> (Linux, Windows)
  or \<^verbatim>\<open>COMMAND\<close> (Mac OS X) exposes formal content via tooltips and/or
  hyperlinks (see also \secref{sec:tooltips-hyperlinks}). Output (in popups
  etc.) may be explored recursively, using the same techniques as in the
  editor source buffer.

  Thus the Prover IDE gives an impression of direct access to formal content
  of the prover within the editor, but in reality only certain aspects are
  exposed, according to the possibilities of the prover and its add-on tools.
\<close>


subsection \<open>Documentation\<close>

text \<open>
  The \<^emph>\<open>Documentation\<close> panel of Isabelle/jEdit provides access to some example
  theory files and the standard Isabelle documentation. PDF files are opened
  by regular desktop operations of the underlying platform. The section
  ``Original jEdit Documentation'' contains the original \<^emph>\<open>User's Guide\<close> of
  this sophisticated text editor. The same is accessible via the \<^verbatim>\<open>Help\<close> menu
  or \<^verbatim>\<open>F1\<close> keyboard shortcut, using the built-in HTML viewer of Java/Swing.
  The latter also includes \<^emph>\<open>Frequently Asked Questions\<close> and documentation of
  individual plugins.

  Most of the information about jEdit is relevant for Isabelle/jEdit as well,
  but one needs to keep in mind that defaults sometimes differ, and the
  official jEdit documentation does not know about the Isabelle plugin with
  its support for continuous checking of formal source text: jEdit is a plain
  text editor, but Isabelle/jEdit is a Prover IDE.
\<close>


subsection \<open>Plugins\<close>

text \<open>
  The \<^emph>\<open>Plugin Manager\<close> of jEdit allows to augment editor functionality by JVM
  modules (jars) that are provided by the central plugin repository, which is
  accessible via various mirror sites.

  Connecting to the plugin server-infrastructure of the jEdit project allows
  to update bundled plugins or to add further functionality. This needs to be
  done with the usual care for such an open bazaar of contributions. Arbitrary
  combinations of add-on features are apt to cause problems. It is advisable
  to start with the default configuration of Isabelle/jEdit and develop some
  understanding how it is supposed to work, before loading too many other
  plugins.

  \<^medskip>
  The main \<^emph>\<open>Isabelle\<close> plugin is an integral part of Isabelle/jEdit and needs
  to remain active at all times! A few additional plugins are bundled with
  Isabelle/jEdit for convenience or out of necessity, notably \<^emph>\<open>Console\<close> with
  its Isabelle/Scala sub-plugin (\secref{sec:scala-console}) and \<^emph>\<open>SideKick\<close>
  with some Isabelle-specific parsers for document tree structure
  (\secref{sec:sidekick}). The \<^emph>\<open>Navigator\<close> plugin is particularly important
  for hyperlinks within the formal document-model
  (\secref{sec:tooltips-hyperlinks}). Further plugins (e.g.\ \<^emph>\<open>ErrorList\<close>,
  \<^emph>\<open>Code2HTML\<close>) are included to saturate the dependencies of bundled plugins,
  but have no particular use in Isabelle/jEdit.
\<close>


subsection \<open>Options \label{sec:options}\<close>

text \<open>
  Both jEdit and Isabelle have distinctive management of persistent options.

  Regular jEdit options are accessible via the dialogs \<^emph>\<open>Utilities~/ Global
  Options\<close> or \<^emph>\<open>Plugins~/ Plugin Options\<close>, with a second chance to flip the
  two within the central options dialog. Changes are stored in @{path
  "$ISABELLE_HOME_USER/jedit/properties"} and @{path
  "$ISABELLE_HOME_USER/jedit/keymaps"}.

  Isabelle system options are managed by Isabelle/Scala and changes are stored
  in @{path "$ISABELLE_HOME_USER/etc/preferences"}, independently of
  other jEdit properties. See also @{cite "isabelle-system"}, especially the
  coverage of sessions and command-line tools like @{tool build} or @{tool
  options}.

  Those Isabelle options that are declared as \<^verbatim>\<open>public\<close> are configurable in
  Isabelle/jEdit via \<^emph>\<open>Plugin Options~/ Isabelle~/ General\<close>. Moreover, there
  are various options for rendering of document content, which are
  configurable via \<^emph>\<open>Plugin Options~/ Isabelle~/ Rendering\<close>. Thus \<^emph>\<open>Plugin
  Options~/ Isabelle\<close> in jEdit provides a view on a subset of Isabelle system
  options. Note that some of these options affect general parameters that are
  relevant outside Isabelle/jEdit as well, e.g.\ @{system_option threads} or
  @{system_option parallel_proofs} for the Isabelle build tool @{cite
  "isabelle-system"}, but it is possible to use the settings variable
  @{setting ISABELLE_BUILD_OPTIONS} to change defaults for batch builds
  without affecting the Prover IDE.

  The jEdit action @{action_def isabelle.options} opens the options dialog for
  the Isabelle plugin; it can be mapped to editor GUI elements as usual.

  \<^medskip>
  Options are usually loaded on startup and saved on shutdown of
  Isabelle/jEdit. Editing the machine-generated @{path
  "$ISABELLE_HOME_USER/jedit/properties"} or @{path
  "$ISABELLE_HOME_USER/etc/preferences"} manually while the application is
  running is likely to cause surprise due to lost update!
\<close>


subsection \<open>Keymaps\<close>

text \<open>
  Keyboard shortcuts are managed as a separate concept of \<^emph>\<open>keymap\<close> that is
  configurable via \<^emph>\<open>Global Options~/ Shortcuts\<close>. The \<^verbatim>\<open>imported\<close> keymap is
  derived from the initial environment of properties that is available at the
  first start of the editor; afterwards the keymap file takes precedence and
  is no longer affected by change of default properties.

  This subtle difference of jEdit keymaps versus properties is relevant for
  Isabelle/jEdit due to various fine-tuning of global defaults, with
  additional keyboard shortcuts for Isabelle-specific functionality. Users may
  change their keymap later, but need to copy some keyboard shortcuts manually
  (see also @{path "$ISABELLE_HOME_USER/jedit/keymaps"} versus \<^verbatim>\<open>shortcut\<close>
  properties in \<^file>\<open>$ISABELLE_HOME/src/Tools/jEdit/src/jEdit.props\<close>).
\<close>


section \<open>Command-line invocation \label{sec:command-line}\<close>

text \<open>
  Isabelle/jEdit is normally invoked as a single-instance desktop application,
  based on platform-specific executables for Linux, Windows, Mac OS X.

  It is also possible to invoke the Prover IDE on the command-line, with some
  extra options and environment settings. The command-line usage of @{tool_def
  jedit} is as follows:
  @{verbatim [display]
\<open>Usage: isabelle jedit [OPTIONS] [FILES ...]

  Options are:
    -D NAME=X    set JVM system property
    -J OPTION    add JVM runtime option
    -b           build only
    -d DIR       include session directory
    -f           fresh build
    -j OPTION    add jEdit runtime option
    -l NAME      logic image name
    -m MODE      add print mode for output
    -n           no build of session image on startup
    -s           system build mode for session image

  Start jEdit with Isabelle plugin setup and open FILES
  (default "$USER_HOME/Scratch.thy" or ":" for empty buffer).\<close>}

  The \<^verbatim>\<open>-l\<close> option specifies the session name of the logic image to be used
  for proof processing. Additional session root directories may be included
  via option \<^verbatim>\<open>-d\<close> to augment that name space of @{tool build} @{cite
  "isabelle-system"}.

  By default, the specified image is checked and built on demand. The \<^verbatim>\<open>-s\<close>
  option determines where to store the result session image of @{tool build}.
  The \<^verbatim>\<open>-n\<close> option bypasses the implicit build process for the selected
  session image.

  The \<^verbatim>\<open>-m\<close> option specifies additional print modes for the prover process.
  Note that the system option @{system_option_ref jedit_print_mode} allows to
  do the same persistently (e.g.\ via the \<^emph>\<open>Plugin Options\<close> dialog of
  Isabelle/jEdit), without requiring command-line invocation.

  The \<^verbatim>\<open>-J\<close> and \<^verbatim>\<open>-j\<close> options allow to pass additional low-level options to
  the JVM or jEdit, respectively. The defaults are provided by the Isabelle
  settings environment @{cite "isabelle-system"}, but note that these only
  work for the command-line tool described here, and not the regular
  application.

  The \<^verbatim>\<open>-D\<close> option allows to define JVM system properties; this is passed
  directly to the underlying \<^verbatim>\<open>java\<close> process.

  The \<^verbatim>\<open>-b\<close> and \<^verbatim>\<open>-f\<close> options control the self-build mechanism of
  Isabelle/jEdit. This is only relevant for building from sources, which also
  requires an auxiliary \<^verbatim>\<open>jedit_build\<close> component from
  \<^url>\<open>http://isabelle.in.tum.de/components\<close>. The official Isabelle release
  already includes a pre-built version of Isabelle/jEdit.

  \<^bigskip>
  It is also possible to connect to an already running Isabelle/jEdit process
  via @{tool_def jedit_client}:
  @{verbatim [display]
\<open>Usage: isabelle jedit_client [OPTIONS] [FILES ...]

  Options are:
    -c           only check presence of server
    -n           only report server name
    -s NAME      server name (default Isabelle)

  Connect to already running Isabelle/jEdit instance and open FILES\<close>}

  The \<^verbatim>\<open>-c\<close> option merely checks the presence of the server, producing a
  process return code accordingly.

  The \<^verbatim>\<open>-n\<close> option reports the server name, and the \<^verbatim>\<open>-s\<close> option provides a
  different server name. The default server name is the official distribution
  name (e.g.\ \<^verbatim>\<open>Isabelle2016\<close>). Thus @{tool jedit_client} can connect to the
  Isabelle desktop application without further options.

  The JVM system property \<^verbatim>\<open>isabelle.jedit_server\<close> provides a different server
  name, e.g.\ use \<^verbatim>\<open>isabelle jedit -Disabelle.jedit_server=\<close>\<open>name\<close> and
  \<^verbatim>\<open>isabelle jedit_client -s\<close>~\<open>name\<close> to connect later on.
\<close>


section \<open>GUI rendering\<close>

subsection \<open>Look-and-feel \label{sec:look-and-feel}\<close>

text \<open>
  jEdit is a Java/AWT/Swing application with some ambition to support
  ``native'' look-and-feel on all platforms, within the limits of what Oracle
  as Java provider and major operating system distributors allow (see also
  \secref{sec:problems}).

  Isabelle/jEdit enables platform-specific look-and-feel by default as
  follows.

    \<^descr>[Linux:] The platform-independent \<^emph>\<open>Metal\<close> is used by default.

    The Linux-specific \<^emph>\<open>GTK+\<close> also works under the side-condition that the
    overall GTK theme and options are selected in a way that works with Java
    AWT/Swing. The JVM has no direct influence of GTK rendering.

    \<^descr>[Windows:] Regular \<^emph>\<open>Windows\<close> is used by default.

    \<^descr>[Mac OS X:] Regular \<^emph>\<open>Mac OS X\<close> is used by default.

    The bundled \<^emph>\<open>MacOSX\<close> plugin provides various functions that are expected
    from applications on that particular platform: quit from menu or dock,
    preferences menu, drag-and-drop of text files on the application,
    full-screen mode for main editor windows. It is advisable to have the
    \<^emph>\<open>MacOSX\<close> plugin enabled all the time on that platform.

  Users may experiment with different Swing look-and-feels, but need to keep
  in mind that this extra variance of GUI functionality is unlikely to work in
  arbitrary combinations. The platform-independent \<^emph>\<open>Metal\<close> and \<^emph>\<open>Nimbus\<close>
  should always work on all platforms, although they are technically and
  stylistically outdated. The historic \<^emph>\<open>CDE/Motif\<close> should be ignored.

  After changing the look-and-feel in \<^emph>\<open>Global Options~/ Appearance\<close>,
  Isabelle/jEdit should be restarted to take full effect.
\<close>


subsection \<open>Displays with very high resolution \label{sec:hdpi}\<close>

text \<open>
  In distant past, displays with $1024 \times 768$ or $1280 \times 1024$
  pixels were considered ``high resolution'' and bitmap fonts with 12 or 14
  pixels as adequate for text rendering. In 2016, we routinely see much higher
  resolutions, e.g. ``Full HD'' at $1920 \times 1080$ pixels or ``Ultra HD'' /
  ``4K'' at $3840 \times 2160$.

  GUI frameworks are usually lagging behind, with hard-wired icon sizes and
  tiny fonts. Java and jEdit do provide reasonable support for very high
  resolution, but this requires manual adjustments as described below.

  \<^medskip>
  The \<^bold>\<open>operating-system\<close> usually provides some configuration for global
  scaling of text fonts, e.g.\ $120\%$--$250\%$ on Windows. This impacts
  regular GUI elements, when used with native look-and-feel: Linux \<^emph>\<open>GTK+\<close>,
  \<^emph>\<open>Windows\<close>, \<^emph>\<open>Mac OS X\<close>, respectively. Alternatively, it is possible to use
  the platform-independent \<^emph>\<open>Metal\<close> look-and-feel and readjust its main font
  sizes via jEdit options explained below. The Isabelle/jEdit \<^bold>\<open>application\<close>
  provides further options to adjust font sizes in particular GUI elements.
  Here is a summary of all relevant font properties:

    \<^item> \<^emph>\<open>Global Options / Text Area / Text font\<close>: the main text area font,
    which is also used as reference point for various derived font sizes,
    e.g.\ the \<^emph>\<open>Output\<close> (\secref{sec:output}) and \<^emph>\<open>State\<close>
    (\secref{sec:state-output}) panels.

    \<^item> \<^emph>\<open>Global Options / Gutter / Gutter font\<close>: the font for the gutter area
    left of the main text area, e.g.\ relevant for display of line numbers
    (disabled by default).

    \<^item> \<^emph>\<open>Global Options / Appearance / Button, menu and label font\<close> as well as
    \<^emph>\<open>List and text field font\<close>: this specifies the primary and secondary font
    for the \<^emph>\<open>Metal\<close> look-and-feel (\secref{sec:look-and-feel}).

    \<^item> \<^emph>\<open>Plugin Options / Isabelle / General / Reset Font Size\<close>: the main text
    area font size for action @{action_ref "isabelle.reset-font-size"}, e.g.\
    relevant for quick scaling like in common web browsers.

    \<^item> \<^emph>\<open>Plugin Options / Console / General / Font\<close>: the console window font,
    e.g.\ relevant for Isabelle/Scala command-line.

  In \figref{fig:isabelle-jedit-hdpi} the \<^emph>\<open>Metal\<close> look-and-feel is configured
  with custom fonts at 30 pixels, and the main text area and console at 36
  pixels. This leads to decent rendering quality, despite the old-fashioned
  appearance of \<^emph>\<open>Metal\<close>.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[width=\textwidth]{isabelle-jedit-hdpi}
  \end{center}
  \caption{Metal look-and-feel with custom fonts for very high resolution}
  \label{fig:isabelle-jedit-hdpi}
  \end{figure}
\<close>


chapter \<open>Augmented jEdit functionality\<close>

section \<open>Dockable windows \label{sec:dockables}\<close>

text \<open>
  In jEdit terminology, a \<^emph>\<open>view\<close> is an editor window with one or more \<^emph>\<open>text
  areas\<close> that show the content of one or more \<^emph>\<open>buffers\<close>. A regular view may
  be surrounded by \<^emph>\<open>dockable windows\<close> that show additional information in
  arbitrary format, not just text; a \<^emph>\<open>plain view\<close> does not allow dockables.
  The \<^emph>\<open>dockable window manager\<close> of jEdit organizes these dockable windows,
  either as \<^emph>\<open>floating\<close> windows, or \<^emph>\<open>docked\<close> panels within one of the four
  margins of the view. There may be any number of floating instances of some
  dockable window, but at most one docked instance; jEdit actions that address
  \<^emph>\<open>the\<close> dockable window of a particular kind refer to the unique docked
  instance.

  Dockables are used routinely in jEdit for important functionality like
  \<^emph>\<open>HyperSearch Results\<close> or the \<^emph>\<open>File System Browser\<close>. Plugins often provide
  a central dockable to access their main functionality, which may be opened
  by the user on demand. The Isabelle/jEdit plugin takes this approach to the
  extreme: its plugin menu provides the entry-points to many panels that are
  managed as dockable windows. Some important panels are docked by default,
  e.g.\ \<^emph>\<open>Documentation\<close>, \<^emph>\<open>State\<close>, \<^emph>\<open>Theories\<close> \<^emph>\<open>Output\<close>, \<^emph>\<open>Query\<close>. The user
  can change this arrangement easily and persistently.

  Compared to plain jEdit, dockable window management in Isabelle/jEdit is
  slightly augmented according to the the following principles:

  \<^item> Floating windows are dependent on the main window as \<^emph>\<open>dialog\<close> in
  the sense of Java/AWT/Swing. Dialog windows always stay on top of the view,
  which is particularly important in full-screen mode. The desktop environment
  of the underlying platform may impose further policies on such dependent
  dialogs, in contrast to fully independent windows, e.g.\ some window
  management functions may be missing.

  \<^item> Keyboard focus of the main view vs.\ a dockable window is carefully
  managed according to the intended semantics, as a panel mainly for output or
  input. For example, activating the \<^emph>\<open>Output\<close> (\secref{sec:output}) or State
  (\secref{sec:state-output}) panel via the dockable window manager returns
  keyboard focus to the main text area, but for \<^emph>\<open>Query\<close> (\secref{sec:query})
  or \<^emph>\<open>Sledgehammer\<close> \secref{sec:sledgehammer} the focus is given to the main
  input field of that panel.

  \<^item> Panels that provide their own text area for output have an additional
  dockable menu item \<^emph>\<open>Detach\<close>. This produces an independent copy of the
  current output as a floating \<^emph>\<open>Info\<close> window, which displays that content
  independently of ongoing changes of the PIDE document-model. Note that
  Isabelle/jEdit popup windows (\secref{sec:tooltips-hyperlinks}) provide a
  similar \<^emph>\<open>Detach\<close> operation as an icon.
\<close>


section \<open>Isabelle symbols \label{sec:symbols}\<close>

text \<open>
  Isabelle sources consist of \<^emph>\<open>symbols\<close> that extend plain ASCII to allow
  infinitely many mathematical symbols within the formal sources. This works
  without depending on particular encodings and varying Unicode
  standards.\<^footnote>\<open>Raw Unicode characters within formal sources would compromise
  portability and reliability in the face of changing interpretation of
  special features of Unicode, such as Combining Characters or Bi-directional
  Text.\<close> See @{cite "Wenzel:2011:CICM"}.

  For the prover back-end, formal text consists of ASCII characters that are
  grouped according to some simple rules, e.g.\ as plain ``\<^verbatim>\<open>a\<close>'' or symbolic
  ``\<^verbatim>\<open>\<alpha>\<close>''. For the editor front-end, a certain subset of symbols is rendered
  physically via Unicode glyphs, in order to show ``\<^verbatim>\<open>\<alpha>\<close>'' as ``\<open>\<alpha>\<close>'', for
  example. This symbol interpretation is specified by the Isabelle system
  distribution in \<^file>\<open>$ISABELLE_HOME/etc/symbols\<close> and may be augmented by the
  user in @{path "$ISABELLE_HOME_USER/etc/symbols"}.

  The appendix of @{cite "isabelle-isar-ref"} gives an overview of the
  standard interpretation of finitely many symbols from the infinite
  collection. Uninterpreted symbols are displayed literally, e.g.\
  ``\<^verbatim>\<open>\<foobar>\<close>''. Overlap of Unicode characters used in symbol
  interpretation with informal ones (which might appear e.g.\ in comments)
  needs to be avoided. Raw Unicode characters within prover source files
  should be restricted to informal parts, e.g.\ to write text in non-latin
  alphabets in comments.
\<close>

paragraph \<open>Encoding.\<close>
text \<open>Technically, the Unicode interpretation of Isabelle symbols is an
  \<^emph>\<open>encoding\<close> called \<^verbatim>\<open>UTF-8-Isabelle\<close> in jEdit (\<^emph>\<open>not\<close> in the underlying
  JVM). It is provided by the Isabelle/jEdit plugin and enabled by default for
  all source files. Sometimes such defaults are reset accidentally, or
  malformed UTF-8 sequences in the text force jEdit to fall back on a
  different encoding like \<^verbatim>\<open>ISO-8859-15\<close>. In that case, verbatim ``\<^verbatim>\<open>\<alpha>\<close>'' will
  be shown in the text buffer instead of its Unicode rendering ``\<open>\<alpha>\<close>''. The
  jEdit menu operation \<^emph>\<open>File~/ Reload with Encoding~/ UTF-8-Isabelle\<close> helps
  to resolve such problems (after repairing malformed parts of the text). \<close>

paragraph \<open>Font.\<close>
text \<open>Correct rendering via Unicode requires a font that contains glyphs for
  the corresponding codepoints. There are also various unusual symbols with
  particular purpose in Isabelle, e.g.\ control symbols and very long arrows.
  Isabelle/jEdit prefers its own application fonts \<^verbatim>\<open>IsabelleText\<close>, which
  ensures that standard collection of Isabelle symbols is actually shown on
  the screen (or printer) as expected.

  Note that a Java/AWT/Swing application can load additional fonts only if
  they are not installed on the operating system already! Some outdated
  version of \<^verbatim>\<open>IsabelleText\<close> that happens to be provided by the operating
  system would prevent Isabelle/jEdit to use its bundled version. This could
  lead to missing glyphs (black rectangles), when the system version of
  \<^verbatim>\<open>IsabelleText\<close> is older than the application version. This problem can be
  avoided by refraining to ``install'' any version of \<^verbatim>\<open>IsabelleText\<close> in the
  first place, although it might be tempting to use the same font in other
  applications.

  HTML pages generated by Isabelle refer to the same \<^verbatim>\<open>IsabelleText\<close> font as a
  server-side resource. Thus a web-browser can use that without requiring a
  locally installed copy.
\<close>

paragraph \<open>Input methods.\<close>
text \<open>In principle, Isabelle/jEdit could delegate the problem to produce
  Isabelle symbols in their Unicode rendering to the underlying operating
  system and its \<^emph>\<open>input methods\<close>. Regular jEdit also provides various ways to
  work with \<^emph>\<open>abbreviations\<close> to produce certain non-ASCII characters. Since
  none of these standard input methods work satisfactorily for the
  mathematical characters required for Isabelle, various specific
  Isabelle/jEdit mechanisms are provided.

  This is a summary for practically relevant input methods for Isabelle
  symbols.

  \<^enum> The \<^emph>\<open>Symbols\<close> panel: some GUI buttons allow to insert certain symbols in
  the text buffer. There are also tooltips to reveal the official Isabelle
  representation with some additional information about \<^emph>\<open>symbol
  abbreviations\<close> (see below).

  \<^enum> Copy/paste from decoded source files: text that is rendered as Unicode
  already can be re-used to produce further text. This also works between
  different applications, e.g.\ Isabelle/jEdit and some web browser or mail
  client, as long as the same Unicode interpretation of Isabelle symbols is
  used.

  \<^enum> Copy/paste from prover output within Isabelle/jEdit. The same principles
  as for text buffers apply, but note that \<^emph>\<open>copy\<close> in secondary Isabelle/jEdit
  windows works via the keyboard shortcuts \<^verbatim>\<open>C+c\<close> or \<^verbatim>\<open>C+INSERT\<close>, while jEdit
  menu actions always refer to the primary text area!

  \<^enum> Completion provided by the Isabelle plugin (see \secref{sec:completion}).
  Isabelle symbols have a canonical name and optional abbreviations. This can
  be used with the text completion mechanism of Isabelle/jEdit, to replace a
  prefix of the actual symbol like \<^verbatim>\<open>\<lambda>\<close>, or its name preceded by backslash
  \<^verbatim>\<open>\lambda\<close>, or its ASCII abbreviation \<^verbatim>\<open>%\<close> by the Unicode rendering.

  The following table is an extract of the information provided by the
  standard \<^file>\<open>$ISABELLE_HOME/etc/symbols\<close> file:

  \<^medskip>
  \begin{tabular}{lll}
    \<^bold>\<open>symbol\<close> & \<^bold>\<open>name with backslash\<close> & \<^bold>\<open>abbreviation\<close> \\\hline
    \<open>\<lambda>\<close> & \<^verbatim>\<open>\lambda\<close> & \<^verbatim>\<open>%\<close> \\
    \<open>\<Rightarrow>\<close> & \<^verbatim>\<open>\Rightarrow\<close> & \<^verbatim>\<open>=>\<close> \\
    \<open>\<Longrightarrow>\<close> & \<^verbatim>\<open>\Longrightarrow\<close> & \<^verbatim>\<open>==>\<close> \\[0.5ex]
    \<open>\<And>\<close> & \<^verbatim>\<open>\And\<close> & \<^verbatim>\<open>!!\<close> \\
    \<open>\<equiv>\<close> & \<^verbatim>\<open>\equiv\<close> & \<^verbatim>\<open>==\<close> \\[0.5ex]
    \<open>\<forall>\<close> & \<^verbatim>\<open>\forall\<close> & \<^verbatim>\<open>!\<close> \\
    \<open>\<exists>\<close> & \<^verbatim>\<open>\exists\<close> & \<^verbatim>\<open>?\<close> \\
    \<open>\<longrightarrow>\<close> & \<^verbatim>\<open>\longrightarrow\<close> & \<^verbatim>\<open>-->\<close> \\
    \<open>\<and>\<close> & \<^verbatim>\<open>\and\<close> & \<^verbatim>\<open>&\<close> \\
    \<open>\<or>\<close> & \<^verbatim>\<open>\or\<close> & \<^verbatim>\<open>|\<close> \\
    \<open>\<not>\<close> & \<^verbatim>\<open>\not\<close> & \<^verbatim>\<open>~\<close> \\
    \<open>\<noteq>\<close> & \<^verbatim>\<open>\noteq\<close> & \<^verbatim>\<open>~=\<close> \\
    \<open>\<in>\<close> & \<^verbatim>\<open>\in\<close> & \<^verbatim>\<open>:\<close> \\
    \<open>\<notin>\<close> & \<^verbatim>\<open>\notin\<close> & \<^verbatim>\<open>~:\<close> \\
  \end{tabular}
  \<^medskip>

  Note that the above abbreviations refer to the input method. The logical
  notation provides ASCII alternatives that often coincide, but sometimes
  deviate. This occasionally causes user confusion with old-fashioned Isabelle
  source that use ASCII replacement notation like \<^verbatim>\<open>!\<close> or \<^verbatim>\<open>ALL\<close> directly in
  the text.

  On the other hand, coincidence of symbol abbreviations with ASCII
  replacement syntax syntax helps to update old theory sources via explicit
  completion (see also \<^verbatim>\<open>C+b\<close> explained in \secref{sec:completion}).
\<close>

paragraph \<open>Control symbols.\<close>
text \<open>There are some special control symbols to modify the display style of a
  single symbol (without nesting). Control symbols may be applied to a region
  of selected text, either using the \<^emph>\<open>Symbols\<close> panel or keyboard shortcuts or
  jEdit actions. These editor operations produce a separate control symbol for
  each symbol in the text, in order to make the whole text appear in a certain
  style.

  \<^medskip>
  \begin{tabular}{llll}
    \<^bold>\<open>style\<close> & \<^bold>\<open>symbol\<close> & \<^bold>\<open>shortcut\<close> & \<^bold>\<open>action\<close> \\\hline
    superscript & \<^verbatim>\<open>\<^sup>\<close> & \<^verbatim>\<open>C+e UP\<close> & @{action_ref "isabelle.control-sup"} \\
    subscript & \<^verbatim>\<open>\<^sub>\<close> & \<^verbatim>\<open>C+e DOWN\<close> & @{action_ref "isabelle.control-sub"} \\
    bold face & \<^verbatim>\<open>\<^bold>\<close> & \<^verbatim>\<open>C+e RIGHT\<close> & @{action_ref "isabelle.control-bold"} \\
    emphasized & \<^verbatim>\<open>\<^emph>\<close> & \<^verbatim>\<open>C+e LEFT\<close> & @{action_ref "isabelle.control-emph"} \\
    reset & & \<^verbatim>\<open>C+e BACK_SPACE\<close> & @{action_ref "isabelle.control-reset"} \\
  \end{tabular}
  \<^medskip>

  To produce a single control symbol, it is also possible to complete on
  \<^verbatim>\<open>\sup\<close>, \<^verbatim>\<open>\sub\<close>, \<^verbatim>\<open>\bold\<close>, \<^verbatim>\<open>\emph\<close> as for regular symbols.

  The emphasized style only takes effect in document output (when used with a
  cartouche), but not in the editor.
\<close>


section \<open>Scala console \label{sec:scala-console}\<close>

text \<open>
  The \<^emph>\<open>Console\<close> plugin manages various shells (command interpreters), e.g.\
  \<^emph>\<open>BeanShell\<close>, which is the official jEdit scripting language, and the
  cross-platform \<^emph>\<open>System\<close> shell. Thus the console provides similar
  functionality than the Emacs buffers \<^verbatim>\<open>*scratch*\<close> and \<^verbatim>\<open>*shell*\<close>.

  Isabelle/jEdit extends the repertoire of the console by \<^emph>\<open>Scala\<close>, which is
  the regular Scala toplevel loop running inside the same JVM process as
  Isabelle/jEdit itself. This means the Scala command interpreter has access
  to the JVM name space and state of the running Prover IDE application. The
  default environment imports the full content of packages \<^verbatim>\<open>isabelle\<close> and
  \<^verbatim>\<open>isabelle.jedit\<close>.

  For example, \<^verbatim>\<open>PIDE\<close> refers to the Isabelle/jEdit plugin object, and \<^verbatim>\<open>view\<close>
  to the current editor view of jEdit. The Scala expression
  \<^verbatim>\<open>PIDE.snapshot(view)\<close> makes a PIDE document snapshot of the current buffer
  within the current editor view.

  This helps to explore Isabelle/Scala functionality interactively. Some care
  is required to avoid interference with the internals of the running
  application.
\<close>


section \<open>File-system access\<close>

text \<open>
  File specifications in jEdit follow various formats and conventions
  according to \<^emph>\<open>Virtual File Systems\<close>, which may be also provided by
  additional plugins. This allows to access remote files via the \<^verbatim>\<open>http:\<close>
  protocol prefix, for example. Isabelle/jEdit attempts to work with the
  file-system model of jEdit as far as possible. In particular, theory sources
  are passed directly from the editor to the prover, without indirection via
  physical files.

  Despite the flexibility of URLs in jEdit, local files are particularly
  important and are accessible without protocol prefix. The file path notation
  is that of the Java Virtual Machine on the underlying platform. On Windows
  the preferred form uses backslashes, but happens to accept forward slashes
  like Unix/POSIX as well. Further differences arise due to Windows drive
  letters and network shares.

  The Java notation for files needs to be distinguished from the one of
  Isabelle, which uses POSIX notation with forward slashes on \<^emph>\<open>all\<close>
  platforms. Isabelle/ML on Windows uses Unix-style path notation, too, and
  driver letter representation as in Cygwin (e.g.\ \<^verbatim>\<open>/cygdrive/c\<close>). Moreover,
  environment variables from the Isabelle process may be used freely, e.g.\
  \<^file>\<open>$ISABELLE_HOME/etc/symbols\<close> or \<^file>\<open>$POLYML_HOME/README\<close>. There are special
  shortcuts: \<^dir>\<open>~\<close> for \<^dir>\<open>$USER_HOME\<close> and \<^dir>\<open>~~\<close> for \<^dir>\<open>$ISABELLE_HOME\<close>.

  \<^medskip>
  Since jEdit happens to support environment variables within file
  specifications as well, it is natural to use similar notation within the
  editor, e.g.\ in the file-browser. This does not work in full generality,
  though, due to the bias of jEdit towards platform-specific notation and of
  Isabelle towards POSIX. Moreover, the Isabelle settings environment is not
  yet active when starting Isabelle/jEdit via its standard application
  wrapper, in contrast to @{tool jedit} run from the command line
  (\secref{sec:command-line}).

  Isabelle/jEdit imitates \<^verbatim>\<open>$ISABELLE_HOME\<close> and \<^verbatim>\<open>$ISABELLE_HOME_USER\<close> within
  the Java process environment, in order to allow easy access to these
  important places from the editor. The file browser of jEdit also includes
  \<^emph>\<open>Favorites\<close> for these two important locations.

  \<^medskip>
  Path specifications in prover input or output usually include formal markup
  that turns it into a hyperlink (see also \secref{sec:tooltips-hyperlinks}).
  This allows to open the corresponding file in the text editor, independently
  of the path notation. If the path refers to a directory, the jEdit file
  browser is opened on it.

  Formally checked paths in prover input are subject to completion
  (\secref{sec:completion}): partial specifications are resolved via directory
  content and possible completions are offered in a popup.
\<close>


section \<open>SideKick parsers \label{sec:sidekick}\<close>

text \<open>
  The \<^emph>\<open>SideKick\<close> plugin provides some general services to display buffer
  structure in a tree view. Isabelle/jEdit provides SideKick parsers for its
  main mode for theory files, as well as some minor modes for the \<^verbatim>\<open>NEWS\<close> file
  (see \figref{fig:sidekick}), session \<^verbatim>\<open>ROOT\<close> files, system \<^verbatim>\<open>options\<close>, and
  Bib{\TeX} files (\secref{sec:bibtex}).

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{sidekick}
  \end{center}
  \caption{The Isabelle NEWS file with SideKick tree view}
  \label{fig:sidekick}
  \end{figure}

  The special SideKick parser \<^verbatim>\<open>isabelle-markup\<close> exposes the uninterpreted
  markup tree of the PIDE document model of the current buffer. This is
  occasionally useful for informative purposes, but the amount of displayed
  information might cause problems for large buffers.
\<close>


chapter \<open>Prover IDE functionality \label{sec:document-model}\<close>

section \<open>Document model \label{sec:document-model}\<close>

text \<open>
  The document model is central to the PIDE architecture: the editor and the
  prover have a common notion of structured source text with markup, which is
  produced by formal processing. The editor is responsible for edits of
  document source, as produced by the user. The prover is responsible for
  reports of document markup, as produced by its processing in the background.

  Isabelle/jEdit handles classic editor events of jEdit, in order to connect
  the physical world of the GUI (with its singleton state) to the mathematical
  world of multiple document versions (with timeless and stateless updates).
\<close>


subsection \<open>Editor buffers and document nodes \label{sec:buffer-node}\<close>

text \<open>
  As a regular text editor, jEdit maintains a collection of \<^emph>\<open>buffers\<close> to
  store text files; each buffer may be associated with any number of visible
  \<^emph>\<open>text areas\<close>. Buffers are subject to an \<^emph>\<open>edit mode\<close> that is determined
  from the file name extension. The following modes are treated specifically
  in Isabelle/jEdit:

  \<^medskip>
  \begin{tabular}{lll}
  \<^bold>\<open>mode\<close> & \<^bold>\<open>file name\<close> & \<^bold>\<open>content\<close> \\\hline
  \<^verbatim>\<open>isabelle\<close> & \<^verbatim>\<open>*.thy\<close> & theory source \\
  \<^verbatim>\<open>isabelle-ml\<close> & \<^verbatim>\<open>*.ML\<close> & Isabelle/ML source \\
  \<^verbatim>\<open>sml\<close> & \<^verbatim>\<open>*.sml\<close> or \<^verbatim>\<open>*.sig\<close> & Standard ML source \\
  \<^verbatim>\<open>isabelle-root\<close> & \<^verbatim>\<open>ROOT\<close> & session root \\
  \<^verbatim>\<open>isabelle-options\<close> & & Isabelle options \\
  \<^verbatim>\<open>isabelle-news\<close> & & Isabelle NEWS \\
  \end{tabular}
  \<^medskip>

  All jEdit buffers are automatically added to the PIDE document-model as
  \<^emph>\<open>document nodes\<close>. The overall document structure is defined by the theory
  nodes in two dimensions:

    \<^enum> via \<^bold>\<open>theory imports\<close> that are specified in the \<^emph>\<open>theory header\<close> using
    concrete syntax of the @{command_ref theory} command @{cite
    "isabelle-isar-ref"};

    \<^enum> via \<^bold>\<open>auxiliary files\<close> that are loaded into a theory by special \<^emph>\<open>load
    commands\<close>, notably @{command_ref ML_file} and @{command_ref SML_file}
    @{cite "isabelle-isar-ref"}.

  In any case, source files are managed by the PIDE infrastructure: the
  physical file-system only plays a subordinate role. The relevant version of
  source text is passed directly from the editor to the prover, using internal
  communication channels.
\<close>


subsection \<open>Theories \label{sec:theories}\<close>

text \<open>
  The \<^emph>\<open>Theories\<close> panel (see also \figref{fig:theories}) provides an overview
  of the status of continuous checking of theory nodes within the document
  model. Unlike batch sessions of @{tool build} @{cite "isabelle-system"},
  theory nodes are identified by full path names; this allows to work with
  multiple (disjoint) Isabelle sessions simultaneously within the same editor
  session.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{theories}
  \end{center}
  \caption{Theories panel with an overview of the document-model, and jEdit
  text areas as editable views on some of the document nodes}
  \label{fig:theories}
  \end{figure}

  Certain events to open or update editor buffers cause Isabelle/jEdit to
  resolve dependencies of theory imports. The system requests to load
  additional files into editor buffers, in order to be included in the
  document model for further checking. It is also possible to let the system
  resolve dependencies automatically, according to the system option
  @{system_option jedit_auto_load}.

  \<^medskip>
  The visible \<^emph>\<open>perspective\<close> of Isabelle/jEdit is defined by the collective
  view on theory buffers via open text areas. The perspective is taken as a
  hint for document processing: the prover ensures that those parts of a
  theory where the user is looking are checked, while other parts that are
  presently not required are ignored. The perspective is changed by opening or
  closing text area windows, or scrolling within a window.

  The \<^emph>\<open>Theories\<close> panel provides some further options to influence the process
  of continuous checking: it may be switched off globally to restrict the
  prover to superficial processing of command syntax. It is also possible to
  indicate theory nodes as \<^emph>\<open>required\<close> for continuous checking: this means
  such nodes and all their imports are always processed independently of the
  visibility status (if continuous checking is enabled). Big theory libraries
  that are marked as required can have significant impact on performance!

  \<^medskip>
  Formal markup of checked theory content is turned into GUI rendering, based
  on a standard repertoire known from mainstream IDEs for programming
  languages: colors, icons, highlighting, squiggly underlines, tooltips,
  hyperlinks etc. For outer syntax of Isabelle/Isar there is some traditional
  syntax-highlighting via static keywords and tokenization within the editor;
  this buffer syntax is determined from theory imports. In contrast, the
  painting of inner syntax (term language etc.)\ uses semantic information
  that is reported dynamically from the logical context. Thus the prover can
  provide additional markup to help the user to understand the meaning of
  formal text, and to produce more text with some add-on tools (e.g.\
  information messages with \<^emph>\<open>sendback\<close> markup by automated provers or
  disprovers in the background). \<close>


subsection \<open>Auxiliary files \label{sec:aux-files}\<close>

text \<open>
  Special load commands like @{command_ref ML_file} and @{command_ref
  SML_file} @{cite "isabelle-isar-ref"} refer to auxiliary files within some
  theory. Conceptually, the file argument of the command extends the theory
  source by the content of the file, but its editor buffer may be loaded~/
  changed~/ saved separately. The PIDE document model propagates changes of
  auxiliary file content to the corresponding load command in the theory, to
  update and process it accordingly: changes of auxiliary file content are
  treated as changes of the corresponding load command.

  \<^medskip>
  As a concession to the massive amount of ML files in Isabelle/HOL itself,
  the content of auxiliary files is only added to the PIDE document-model on
  demand, the first time when opened explicitly in the editor. There are
  further tricks to manage markup of ML files, such that Isabelle/HOL may be
  edited conveniently in the Prover IDE on small machines with only 8\,GB of
  main memory. Using \<^verbatim>\<open>Pure\<close> as logic session image, the exploration may start
  at the top \<^file>\<open>$ISABELLE_HOME/src/HOL/Main.thy\<close> or the bottom
  \<^file>\<open>$ISABELLE_HOME/src/HOL/HOL.thy\<close>, for example.

  Initially, before an auxiliary file is opened in the editor, the prover
  reads its content from the physical file-system. After the file is opened
  for the first time in the editor, e.g.\ by following the hyperlink
  (\secref{sec:tooltips-hyperlinks}) for the argument of its @{command
  ML_file} command, the content is taken from the jEdit buffer.

  The change of responsibility from prover to editor counts as an update of
  the document content, so subsequent theory sources need to be re-checked.
  When the buffer is closed, the responsibility remains to the editor: the
  file may be opened again without causing another document update.

  A file that is opened in the editor, but its theory with the load command is
  not, is presently inactive in the document model. A file that is loaded via
  multiple load commands is associated to an arbitrary one: this situation is
  morally unsupported and might lead to confusion.

  \<^medskip>
  Output that refers to an auxiliary file is combined with that of the
  corresponding load command, and shown whenever the file or the command are
  active (see also \secref{sec:output}).

  Warnings, errors, and other useful markup is attached directly to the
  positions in the auxiliary file buffer, in the manner of standard IDEs. By
  using the load command @{command SML_file} as explained in
  \<^file>\<open>$ISABELLE_HOME/src/Tools/SML/Examples.thy\<close>, Isabelle/jEdit may be used as
  fully-featured IDE for Standard ML, independently of theory or proof
  development: the required theory merely serves as some kind of project file
  for a collection of SML source modules.
\<close>


section \<open>Output \label{sec:output}\<close>

text \<open>
  Prover output consists of \<^emph>\<open>markup\<close> and \<^emph>\<open>messages\<close>. Both are directly
  attached to the corresponding positions in the original source text, and
  visualized in the text area, e.g.\ as text colours for free and bound
  variables, or as squiggly underlines for warnings, errors etc.\ (see also
  \figref{fig:output}). In the latter case, the corresponding messages are
  shown by hovering with the mouse over the highlighted text --- although in
  many situations the user should already get some clue by looking at the
  position of the text highlighting, without seeing the message body itself.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{output}
  \end{center}
  \caption{Multiple views on prover output: gutter with icon, text area with
  popup, text overview column, \<^emph>\<open>Theories\<close> panel, \<^emph>\<open>Output\<close> panel}
  \label{fig:output}
  \end{figure}

  The ``gutter'' on the left-hand-side of the text area uses icons to
  provide a summary of the messages within the adjacent text line. Message
  priorities are used to prefer errors over warnings, warnings over
  information messages; other output is ignored.

  The ``text overview column'' on the right-hand-side of the text area uses
  similar information to paint small rectangles for the overall status of the
  whole text buffer. The graphics is scaled to fit the logical buffer length
  into the given window height. Mouse clicks on the overview area move the
  cursor approximately to the corresponding text line in the buffer.

  The \<^emph>\<open>Theories\<close> panel provides another course-grained overview, but without
  direct correspondence to text positions. The coloured rectangles represent
  the amount of messages of a certain kind (warnings, errors, etc.) and the
  execution status of commands. A double-click on one of the theory entries
  with their status overview opens the corresponding text buffer, without
  moving the cursor to a specific point.

  \<^medskip>
  The \<^emph>\<open>Output\<close> panel displays prover messages that correspond to a given
  command, within a separate window. The cursor position in the presently
  active text area determines the prover command whose cumulative message
  output is appended and shown in that window (in canonical order according to
  the internal execution of the command). There are also control elements to
  modify the update policy of the output wrt.\ continued editor movements:
  \<^emph>\<open>Auto update\<close> and \<^emph>\<open>Update\<close>. This is particularly useful for multiple
  instances of the \<^emph>\<open>Output\<close> panel to look at different situations.
  Alternatively, the panel can be turned into a passive \<^emph>\<open>Info\<close> window via the
  \<^emph>\<open>Detach\<close> menu item.

  Proof state is handled separately (\secref{sec:state-output}), but it is
  also possible to tick the corresponding checkbox to append it to regular
  output (\figref{fig:output-including-state}). This is a globally persistent
  option: it affects all open panels and future editor sessions.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{output-including-state}
  \end{center}
  \caption{Proof state display within the regular output panel}
  \label{fig:output-including-state}
  \end{figure}

  \<^medskip>
  Following the IDE principle, regular messages are attached to the original
  source in the proper place and may be inspected on demand via popups. This
  excludes messages that are somehow internal to the machinery of proof
  checking, notably \<^emph>\<open>proof state\<close> and \<^emph>\<open>tracing\<close>.

  In any case, the same display technology is used for small popups and big
  output windows. The formal text contains markup that may be explored
  recursively via further popups and hyperlinks (see
  \secref{sec:tooltips-hyperlinks}), or clicked directly to initiate certain
  actions (see \secref{sec:auto-tools} and \secref{sec:sledgehammer}).
\<close>


section \<open>Proof state \label{sec:state-output}\<close>

text \<open>
  The main purpose of the Prover IDE is to help the user editing proof
  documents, with ongoing formal checking by the prover in the background.
  This can be done to some extent in the main text area alone, especially for
  well-structured Isar proofs.

  Nonetheless, internal proof state needs to be inspected in many situations
  of exploration and ``debugging''. The \<^emph>\<open>State\<close> panel shows exclusively such
  proof state messages without further distraction, while all other messages
  are displayed in \<^emph>\<open>Output\<close> (\secref{sec:output}).
  \Figref{fig:output-and-state} shows a typical GUI layout where both panels
  are open.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{output-and-state}
  \end{center}
  \caption{Separate proof state display (right) and other output (bottom).}
  \label{fig:output-and-state}
  \end{figure}

  Another typical arrangement has more than one \<^emph>\<open>State\<close> panel open (as
  floating windows), with \<^emph>\<open>Auto update\<close> disabled to look at an old situation
  while the proof text in the vicinity is changed. The \<^emph>\<open>Update\<close> button
  triggers an explicit one-shot update; this operation is also available via
  the action @{action "isabelle.update-state"} (keyboard shortcut \<^verbatim>\<open>S+ENTER\<close>).

  On small screens, it is occasionally useful to have all messages
  concatenated in the regular \<^emph>\<open>Output\<close> panel, e.g.\ see
  \figref{fig:output-including-state}.

  \<^medskip>
  The mechanics of \<^emph>\<open>Output\<close> versus \<^emph>\<open>State\<close> are slightly different:

    \<^item> \<^emph>\<open>Output\<close> shows information that is continuously produced and already
    present when the GUI wants to show it. This is implicitly controlled by
    the visible perspective on the text.

    \<^item> \<^emph>\<open>State\<close> initiates a real-time query on demand, with a full round trip
    including a fresh print operation on the prover side. This is controlled
    explicitly when the cursor is moved to the next command (\<^emph>\<open>Auto update\<close>)
    or the \<^emph>\<open>Update\<close> operation is triggered.

  This can make a difference in GUI responsibility and resource usage within
  the prover process. Applications with very big proof states that are only
  inspected in isolation work better with the \<^emph>\<open>State\<close> panel.
\<close>


section \<open>Query \label{sec:query}\<close>

text \<open>
  The \<^emph>\<open>Query\<close> panel provides various GUI forms to request extra information
  from the prover, as a replacement of old-style diagnostic commands like
  @{command find_theorems}. There are input fields and buttons for a
  particular query command, with output in a dedicated text area.

  The main query modes are presented as separate tabs: \<^emph>\<open>Find Theorems\<close>,
  \<^emph>\<open>Find Constants\<close>, \<^emph>\<open>Print Context\<close>, e.g.\ see \figref{fig:query}. As usual
  in jEdit, multiple \<^emph>\<open>Query\<close> windows may be active at the same time: any
  number of floating instances, but at most one docked instance (which is used
  by default).

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{query}
  \end{center}
  \caption{An instance of the Query panel: find theorems}
  \label{fig:query}
  \end{figure}

  \<^medskip>
  The following GUI elements are common to all query modes:

    \<^item> The spinning wheel provides feedback about the status of a pending query
    wrt.\ the evaluation of its context and its own operation.

    \<^item> The \<^emph>\<open>Apply\<close> button attaches a fresh query invocation to the current
    context of the command where the cursor is pointing in the text.

    \<^item> The \<^emph>\<open>Search\<close> field allows to highlight query output according to some
    regular expression, in the notation that is commonly used on the Java
    platform.\<^footnote>\<open>\<^url>\<open>https://docs.oracle.com/javase/8/docs/api/java/util/regex/Pattern.html\<close>\<close>
    This may serve as an additional visual filter of the result.

    \<^item> The \<^emph>\<open>Zoom\<close> box controls the font size of the output area.

  All query operations are asynchronous: there is no need to wait for the
  evaluation of the document for the query context, nor for the query
  operation itself. Query output may be detached as independent \<^emph>\<open>Info\<close>
  window, using a menu operation of the dockable window manager. The printed
  result usually provides sufficient clues about the original query, with some
  hyperlink to its context (via markup of its head line).
\<close>


subsection \<open>Find theorems\<close>

text \<open>
  The \<^emph>\<open>Query\<close> panel in \<^emph>\<open>Find Theorems\<close> mode retrieves facts from the theory
  or proof context matching all of given criteria in the \<^emph>\<open>Find\<close> text field. A
  single criterium has the following syntax:

  @{rail \<open>
    ('-'?) ('name' ':' @{syntax name} | 'intro' | 'elim' | 'dest' |
      'solves' | 'simp' ':' @{syntax term} | @{syntax term})
  \<close>}

  See also the Isar command @{command_ref find_theorems} in @{cite
  "isabelle-isar-ref"}.
\<close>


subsection \<open>Find constants\<close>

text \<open>
  The \<^emph>\<open>Query\<close> panel in \<^emph>\<open>Find Constants\<close> mode prints all constants whose type
  meets all of the given criteria in the \<^emph>\<open>Find\<close> text field. A single
  criterium has the following syntax:

  @{rail \<open>
    ('-'?)
      ('name' ':' @{syntax name} | 'strict' ':' @{syntax type} | @{syntax type})
  \<close>}

  See also the Isar command @{command_ref find_consts} in @{cite
  "isabelle-isar-ref"}.
\<close>


subsection \<open>Print context\<close>

text \<open>
  The \<^emph>\<open>Query\<close> panel in \<^emph>\<open>Print Context\<close> mode prints information from the
  theory or proof context, or proof state. See also the Isar commands
  @{command_ref print_context}, @{command_ref print_cases}, @{command_ref
  print_term_bindings}, @{command_ref print_theorems}, described in @{cite
  "isabelle-isar-ref"}.
\<close>


section \<open>Tooltips and hyperlinks \label{sec:tooltips-hyperlinks}\<close>

text \<open>
  Formally processed text (prover input or output) contains rich markup that
  can be explored by using the \<^verbatim>\<open>CONTROL\<close> modifier key on Linux and Windows,
  or \<^verbatim>\<open>COMMAND\<close> on Mac OS X. Hovering with the mouse while the modifier is
  pressed reveals a \<^emph>\<open>tooltip\<close> (grey box over the text with a yellow popup)
  and/or a \<^emph>\<open>hyperlink\<close> (black rectangle over the text with change of mouse
  pointer); see also \figref{fig:tooltip}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.5]{popup1}
  \end{center}
  \caption{Tooltip and hyperlink for some formal entity}
  \label{fig:tooltip}
  \end{figure}

  Tooltip popups use the same rendering technology as the main text area, and
  further tooltips and/or hyperlinks may be exposed recursively by the same
  mechanism; see \figref{fig:nested-tooltips}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.5]{popup2}
  \end{center}
  \caption{Nested tooltips over formal entities}
  \label{fig:nested-tooltips}
  \end{figure}

  The tooltip popup window provides some controls to \<^emph>\<open>close\<close> or \<^emph>\<open>detach\<close> the
  window, turning it into a separate \<^emph>\<open>Info\<close> window managed by jEdit. The
  \<^verbatim>\<open>ESCAPE\<close> key closes \<^emph>\<open>all\<close> popups, which is particularly relevant when
  nested tooltips are stacking up.

  \<^medskip>
  A black rectangle in the text indicates a hyperlink that may be followed by
  a mouse click (while the \<^verbatim>\<open>CONTROL\<close> or \<^verbatim>\<open>COMMAND\<close> modifier key is still
  pressed). Such jumps to other text locations are recorded by the
  \<^emph>\<open>Navigator\<close> plugin, which is bundled with Isabelle/jEdit and enabled by
  default. There are usually navigation arrows in the main jEdit toolbar.

  Note that the link target may be a file that is itself not subject to formal
  document processing of the editor session and thus prevents further
  exploration: the chain of hyperlinks may end in some source file of the
  underlying logic image, or within the ML bootstrap sources of Isabelle/Pure.
\<close>


section \<open>Completion \label{sec:completion}\<close>

text \<open>
  Smart completion of partial input is the IDE functionality \<^emph>\<open>par
  excellance\<close>. Isabelle/jEdit combines several sources of information to
  achieve that. Despite its complexity, it should be possible to get some idea
  how completion works by experimentation, based on the overview of completion
  varieties in \secref{sec:completion-varieties}. The remaining subsections
  explain concepts around completion more systematically.

  \<^medskip>
  \<^emph>\<open>Explicit completion\<close> is triggered by the action @{action_ref
  "isabelle.complete"}, which is bound to the keyboard shortcut \<^verbatim>\<open>C+b\<close>, and
  thus overrides the jEdit default for @{action_ref "complete-word"}.

  \<^emph>\<open>Implicit completion\<close> hooks into the regular keyboard input stream of the
  editor, with some event filtering and optional delays.

  \<^medskip>
  Completion options may be configured in \<^emph>\<open>Plugin Options~/ Isabelle~/
  General~/ Completion\<close>. These are explained in further detail below, whenever
  relevant. There is also a summary of options in
  \secref{sec:completion-options}.

  The asynchronous nature of PIDE interaction means that information from the
  prover is delayed --- at least by a full round-trip of the document update
  protocol. The default options already take this into account, with a
  sufficiently long completion delay to speculate on the availability of all
  relevant information from the editor and the prover, before completing text
  immediately or producing a popup. Although there is an inherent danger of
  non-deterministic behaviour due to such real-time parameters, the general
  completion policy aims at determined results as far as possible.
\<close>


subsection \<open>Varieties of completion \label{sec:completion-varieties}\<close>

subsubsection \<open>Built-in templates\<close>

text \<open>
  Isabelle is ultimately a framework of nested sub-languages of different
  kinds and purposes. The completion mechanism supports this by the following
  built-in templates:

    \<^descr> \<^verbatim>\<open>`\<close> (single ASCII back-quote) supports \<^emph>\<open>quotations\<close> via text
    cartouches. There are three selections, which are always presented in the
    same order and do not depend on any context information. The default
    choice produces a template ``\<open>\<open>\<box>\<close>\<close>'', where the box indicates the cursor
    position after insertion; the other choices help to repair the block
    structure of unbalanced text cartouches.

    \<^descr> \<^verbatim>\<open>@{\<close> is completed to the template ``\<open>@{\<box>}\<close>'', where the box indicates
    the cursor position after insertion. Here it is convenient to use the
    wildcard ``\<^verbatim>\<open>__\<close>'' or a more specific name prefix to let semantic
    completion of name-space entries propose antiquotation names.

  With some practice, input of quoted sub-languages and antiquotations of
  embedded languages should work fluently. Note that national keyboard layouts
  might cause problems with back-quote as dead key: if possible, dead keys
  should be disabled.
\<close>


subsubsection \<open>Syntax keywords\<close>

text \<open>
  Syntax completion tables are determined statically from the keywords of the
  ``outer syntax'' of the underlying edit mode: for theory files this is the
  syntax of Isar commands according to the cumulative theory imports.

  Keywords are usually plain words, which means the completion mechanism only
  inserts them directly into the text for explicit completion
  (\secref{sec:completion-input}), but produces a popup
  (\secref{sec:completion-popup}) otherwise.

  At the point where outer syntax keywords are defined, it is possible to
  specify an alternative replacement string to be inserted instead of the
  keyword itself. An empty string means to suppress the keyword altogether,
  which is occasionally useful to avoid confusion, e.g.\ the rare keyword
  @{command simproc_setup} vs.\ the frequent name-space entry \<open>simp\<close>.
\<close>


subsubsection \<open>Isabelle symbols\<close>

text \<open>
  The completion tables for Isabelle symbols (\secref{sec:symbols}) are
  determined statically from \<^file>\<open>$ISABELLE_HOME/etc/symbols\<close> and @{path
  "$ISABELLE_HOME_USER/etc/symbols"} for each symbol specification as follows:

  \<^medskip>
  \begin{tabular}{ll}
  \<^bold>\<open>completion entry\<close> & \<^bold>\<open>example\<close> \\\hline
  literal symbol & \<^verbatim>\<open>\<forall>\<close> \\
  symbol name with backslash & \<^verbatim>\<open>\\<close>\<^verbatim>\<open>forall\<close> \\
  symbol abbreviation & \<^verbatim>\<open>ALL\<close> or \<^verbatim>\<open>!\<close> \\
  \end{tabular}
  \<^medskip>

  When inserted into the text, the above examples all produce the same Unicode
  rendering \<open>\<forall>\<close> of the underlying symbol \<^verbatim>\<open>\<forall>\<close>.

  A symbol abbreviation that is a plain word, like \<^verbatim>\<open>ALL\<close>, is treated like a
  syntax keyword. Non-word abbreviations like \<^verbatim>\<open>-->\<close> are inserted more
  aggressively, except for single-character abbreviations like \<^verbatim>\<open>!\<close> above.

  Completion via abbreviations like \<^verbatim>\<open>ALL\<close> or \<^verbatim>\<open>-->\<close> depends on the semantic
  language context (\secref{sec:completion-context}). In contrast, backslash
  sequences like \<^verbatim>\<open>\forall\<close> \<^verbatim>\<open>\<forall>\<close> are always possible, but require
  additional interaction to confirm (via popup).

  The latter is important in ambiguous situations, e.g.\ for Isabelle document
  source, which may contain formal symbols or informal {\LaTeX} macros.
  Backslash sequences also help when input is broken, and thus escapes its
  normal semantic context: e.g.\ antiquotations or string literals in ML,
  which do not allow arbitrary backslash sequences.

  \<^medskip>
  Additional abbreviations may be specified in \<^file>\<open>$ISABELLE_HOME/etc/abbrevs\<close>
  and @{path "$ISABELLE_HOME_USER/etc/abbrevs"}. The file content follows
  general Isar outer syntax @{cite "isabelle-isar-ref"}. Abbreviations are
  specified as ``\<open>abbrev\<close>~\<^verbatim>\<open>=\<close>~\<open>text\<close>'' pairs. The replacement \<open>text\<close> may
  consist of more than just one symbol; otherwise the meaning is the same as a
  symbol specification ``\<open>sym\<close>~\<^verbatim>\<open>abbrev:\<close>~\<open>abbrev\<close>'' within @{path
  "etc/symbols"}.
\<close>


subsubsection \<open>Name-space entries\<close>

text \<open>
  This is genuine semantic completion, using information from the prover, so
  it requires some delay. A \<^emph>\<open>failed name-space lookup\<close> produces an error
  message that is annotated with a list of alternative names that are legal.
  The list of results is truncated according to the system option
  @{system_option_ref completion_limit}. The completion mechanism takes this
  into account when collecting information on the prover side.

  Already recognized names are \<^emph>\<open>not\<close> completed further, but completion may be
  extended by appending a suffix of underscores. This provokes a failed
  lookup, and another completion attempt while ignoring the underscores. For
  example, in a name space where \<^verbatim>\<open>foo\<close> and \<^verbatim>\<open>foobar\<close> are known, the input
  \<^verbatim>\<open>foo\<close> remains unchanged, but \<^verbatim>\<open>foo_\<close> may be completed to \<^verbatim>\<open>foo\<close> or
  \<^verbatim>\<open>foobar\<close>.

  The special identifier ``\<^verbatim>\<open>__\<close>'' serves as a wild-card for arbitrary
  completion: it exposes the name-space content to the completion mechanism
  (truncated according to @{system_option completion_limit}). This is
  occasionally useful to explore an unknown name-space, e.g.\ in some
  template.
\<close>


subsubsection \<open>File-system paths\<close>

text \<open>
  Depending on prover markup about file-system paths in the source text, e.g.\
  for the argument of a load command (\secref{sec:aux-files}), the completion
  mechanism explores the directory content and offers the result as completion
  popup. Relative path specifications are understood wrt.\ the \<^emph>\<open>master
  directory\<close> of the document node (\secref{sec:buffer-node}) of the enclosing
  editor buffer; this requires a proper theory, not an auxiliary file.

  A suffix of slashes may be used to continue the exploration of an already
  recognized directory name.
\<close>


subsubsection \<open>Spell-checking\<close>

text \<open>
  The spell-checker combines semantic markup from the prover (regions of plain
  words) with static dictionaries (word lists) that are known to the editor.

  Unknown words are underlined in the text, using @{system_option_ref
  spell_checker_color} (blue by default). This is not an error, but a hint to
  the user that some action may be taken. The jEdit context menu provides
  various actions, as far as applicable:

  \<^medskip>
  \begin{tabular}{l}
  @{action_ref "isabelle.complete-word"} \\
  @{action_ref "isabelle.exclude-word"} \\
  @{action_ref "isabelle.exclude-word-permanently"} \\
  @{action_ref "isabelle.include-word"} \\
  @{action_ref "isabelle.include-word-permanently"} \\
  \end{tabular}
  \<^medskip>

  Instead of the specific @{action_ref "isabelle.complete-word"}, it is also
  possible to use the generic @{action_ref "isabelle.complete"} with its
  default keyboard shortcut \<^verbatim>\<open>C+b\<close>.

  \<^medskip>
  Dictionary lookup uses some educated guesses about lower-case, upper-case,
  and capitalized words. This is oriented on common use in English, where this
  aspect is not decisive for proper spelling (in contrast to German, for
  example).
\<close>


subsection \<open>Semantic completion context \label{sec:completion-context}\<close>

text \<open>
  Completion depends on a semantic context that is provided by the prover,
  although with some delay, because at least a full PIDE protocol round-trip
  is required. Until that information becomes available in the PIDE
  document-model, the default context is given by the outer syntax of the
  editor mode (see also \secref{sec:buffer-node}).

  The semantic \<^emph>\<open>language context\<close> provides information about nested
  sub-languages of Isabelle: keywords are only completed for outer syntax, and
  antiquotations for languages that support them. Symbol abbreviations only
  work for specific sub-languages: e.g.\ ``\<^verbatim>\<open>=>\<close>'' is \<^emph>\<open>not\<close> completed in
  regular ML source, but is completed within ML strings, comments,
  antiquotations. Backslash representations of symbols like ``\<^verbatim>\<open>\foobar\<close>'' or
  ``\<^verbatim>\<open>\<foobar>\<close>'' work in any context --- after additional confirmation.

  The prover may produce \<^emph>\<open>no completion\<close> markup in exceptional situations, to
  tell that some language keywords should be excluded from further completion
  attempts. For example, ``\<^verbatim>\<open>:\<close>'' within accepted Isar syntax looses its
  meaning as abbreviation for symbol ``\<open>\<in>\<close>''.
\<close>


subsection \<open>Input events \label{sec:completion-input}\<close>

text \<open>
  Completion is triggered by certain events produced by the user, with
  optional delay after keyboard input according to @{system_option
  jedit_completion_delay}.

  \<^descr>[Explicit completion] works via action @{action_ref "isabelle.complete"}
  with keyboard shortcut \<^verbatim>\<open>C+b\<close>. This overrides the shortcut for @{action_ref
  "complete-word"} in jEdit, but it is possible to restore the original jEdit
  keyboard mapping of @{action "complete-word"} via \<^emph>\<open>Global Options~/
  Shortcuts\<close> and invent a different one for @{action "isabelle.complete"}.

  \<^descr>[Explicit spell-checker completion] works via @{action_ref
  "isabelle.complete-word"}, which is exposed in the jEdit context menu, if
  the mouse points to a word that the spell-checker can complete.

  \<^descr>[Implicit completion] works via regular keyboard input of the editor. It
  depends on further side-conditions:

    \<^enum> The system option @{system_option_ref jedit_completion} needs to be
    enabled (default).

    \<^enum> Completion of syntax keywords requires at least 3 relevant characters in
    the text.

    \<^enum> The system option @{system_option_ref jedit_completion_delay} determines
    an additional delay (0.5 by default), before opening a completion popup.
    The delay gives the prover a chance to provide semantic completion
    information, notably the context (\secref{sec:completion-context}).

    \<^enum> The system option @{system_option_ref jedit_completion_immediate}
    (enabled by default) controls whether replacement text should be inserted
    immediately without popup, regardless of @{system_option
    jedit_completion_delay}. This aggressive mode of completion is restricted
    to symbol abbreviations that are not plain words (\secref{sec:symbols}).

    \<^enum> Completion of symbol abbreviations with only one relevant character in
    the text always enforces an explicit popup, regardless of
    @{system_option_ref jedit_completion_immediate}.
\<close>


subsection \<open>Completion popup \label{sec:completion-popup}\<close>

text \<open>
  A \<^emph>\<open>completion popup\<close> is a minimally invasive GUI component over the text
  area that offers a selection of completion items to be inserted into the
  text, e.g.\ by mouse clicks. Items are sorted dynamically, according to the
  frequency of selection, with persistent history. The popup may interpret
  special keys \<^verbatim>\<open>ENTER\<close>, \<^verbatim>\<open>TAB\<close>, \<^verbatim>\<open>ESCAPE\<close>, \<^verbatim>\<open>UP\<close>, \<^verbatim>\<open>DOWN\<close>, \<^verbatim>\<open>PAGE_UP\<close>,
  \<^verbatim>\<open>PAGE_DOWN\<close>, but all other key events are passed to the underlying text
  area. This allows to ignore unwanted completions most of the time and
  continue typing quickly. Thus the popup serves as a mechanism of
  confirmation of proposed items, while the default is to continue without
  completion.

  The meaning of special keys is as follows:

  \<^medskip>
  \begin{tabular}{ll}
  \<^bold>\<open>key\<close> & \<^bold>\<open>action\<close> \\\hline
  \<^verbatim>\<open>ENTER\<close> & select completion (if @{system_option jedit_completion_select_enter}) \\
  \<^verbatim>\<open>TAB\<close> & select completion (if @{system_option jedit_completion_select_tab}) \\
  \<^verbatim>\<open>ESCAPE\<close> & dismiss popup \\
  \<^verbatim>\<open>UP\<close> & move up one item \\
  \<^verbatim>\<open>DOWN\<close> & move down one item \\
  \<^verbatim>\<open>PAGE_UP\<close> & move up one page of items \\
  \<^verbatim>\<open>PAGE_DOWN\<close> & move down one page of items \\
  \end{tabular}
  \<^medskip>

  Movement within the popup is only active for multiple items. Otherwise the
  corresponding key event retains its standard meaning within the underlying
  text area.
\<close>


subsection \<open>Insertion \label{sec:completion-insert}\<close>

text \<open>
  Completion may first propose replacements to be selected (via a popup), or
  replace text immediately in certain situations and depending on certain
  options like @{system_option jedit_completion_immediate}. In any case,
  insertion works uniformly, by imitating normal jEdit text insertion,
  depending on the state of the \<^emph>\<open>text selection\<close>. Isabelle/jEdit tries to
  accommodate the most common forms of advanced selections in jEdit, but not
  all combinations make sense. At least the following important cases are
  well-defined:

    \<^descr>[No selection.] The original is removed and the replacement inserted,
    depending on the caret position.

    \<^descr>[Rectangular selection of zero width.] This special case is treated by
    jEdit as ``tall caret'' and insertion of completion imitates its normal
    behaviour: separate copies of the replacement are inserted for each line
    of the selection.

    \<^descr>[Other rectangular selection or multiple selections.] Here the original
    is removed and the replacement is inserted for each line (or segment) of
    the selection.

  Support for multiple selections is particularly useful for \<^emph>\<open>HyperSearch\<close>:
  clicking on one of the items in the \<^emph>\<open>HyperSearch Results\<close> window makes
  jEdit select all its occurrences in the corresponding line of text. Then
  explicit completion can be invoked via \<^verbatim>\<open>C+b\<close>, e.g.\ to replace occurrences
  of \<^verbatim>\<open>-->\<close> by \<open>\<longrightarrow>\<close>.

  \<^medskip>
  Insertion works by removing and inserting pieces of text from the buffer.
  This counts as one atomic operation on the jEdit history. Thus unintended
  completions may be reverted by the regular @{action undo} action of jEdit.
  According to normal jEdit policies, the recovered text after @{action undo}
  is selected: \<^verbatim>\<open>ESCAPE\<close> is required to reset the selection and to continue
  typing more text.
\<close>


subsection \<open>Options \label{sec:completion-options}\<close>

text \<open>
  This is a summary of Isabelle/Scala system options that are relevant for
  completion. They may be configured in \<^emph>\<open>Plugin Options~/ Isabelle~/ General\<close>
  as usual.

  \<^item> @{system_option_def completion_limit} specifies the maximum number of
  items for various semantic completion operations (name-space entries etc.)

  \<^item> @{system_option_def jedit_completion} guards implicit completion via
  regular jEdit key events (\secref{sec:completion-input}): it allows to
  disable implicit completion altogether.

  \<^item> @{system_option_def jedit_completion_select_enter} and @{system_option_def
  jedit_completion_select_tab} enable keys to select a completion item from
  the popup (\secref{sec:completion-popup}). Note that a regular mouse click
  on the list of items is always possible.

  \<^item> @{system_option_def jedit_completion_context} specifies whether the
  language context provided by the prover should be used at all. Disabling
  that option makes completion less ``semantic''. Note that incomplete or
  severely broken input may cause some disagreement of the prover and the user
  about the intended language context.

  \<^item> @{system_option_def jedit_completion_delay} and @{system_option_def
  jedit_completion_immediate} determine the handling of keyboard events for
  implicit completion (\secref{sec:completion-input}).

  A @{system_option jedit_completion_delay}~\<^verbatim>\<open>> 0\<close> postpones the processing of
  key events, until after the user has stopped typing for the given time span,
  but @{system_option jedit_completion_immediate}~\<^verbatim>\<open>= true\<close> means that
  abbreviations of Isabelle symbols are handled nonetheless.

  \<^item> @{system_option_def jedit_completion_path_ignore} specifies ``glob''
  patterns to ignore in file-system path completion (separated by colons),
  e.g.\ backup files ending with tilde.

  \<^item> @{system_option_def spell_checker} is a global guard for all spell-checker
  operations: it allows to disable that mechanism altogether.

  \<^item> @{system_option_def spell_checker_dictionary} determines the current
  dictionary, taken from the colon-separated list in the settings variable
  @{setting_def JORTHO_DICTIONARIES}. There are jEdit actions to specify local
  updates to a dictionary, by including or excluding words. The result of
  permanent dictionary updates is stored in the directory @{path
  "$ISABELLE_HOME_USER/dictionaries"}, in a separate file for each dictionary.

  \<^item> @{system_option_def spell_checker_elements} specifies a comma-separated
  list of markup elements that delimit words in the source that is subject to
  spell-checking, including various forms of comments.
\<close>


section \<open>Automatically tried tools \label{sec:auto-tools}\<close>

text \<open>
  Continuous document processing works asynchronously in the background.
  Visible document source that has been evaluated may get augmented by
  additional results of \<^emph>\<open>asynchronous print functions\<close>. An example for that
  is proof state output, if that is enabled in the Output panel
  (\secref{sec:output}). More heavy-weight print functions may be applied as
  well, e.g.\ to prove or disprove parts of the formal text by other means.

  Isabelle/HOL provides various automatically tried tools that operate on
  outermost goal statements (e.g.\ @{command lemma}, @{command theorem}),
  independently of the state of the current proof attempt. They work
  implicitly without any arguments. Results are output as \<^emph>\<open>information
  messages\<close>, which are indicated in the text area by blue squiggles and a blue
  information sign in the gutter (see \figref{fig:auto-tools}). The message
  content may be shown as for other output (see also \secref{sec:output}).
  Some tools produce output with \<^emph>\<open>sendback\<close> markup, which means that clicking
  on certain parts of the text inserts that into the source in the proper
  place.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{auto-tools}
  \end{center}
  \caption{Result of automatically tried tools}
  \label{fig:auto-tools}
  \end{figure}

  \<^medskip>
  The following Isabelle system options control the behavior of automatically
  tried tools (see also the jEdit dialog window \<^emph>\<open>Plugin Options~/ Isabelle~/
  General~/ Automatically tried tools\<close>):

  \<^item> @{system_option_ref auto_methods} controls automatic use of a combination
  of standard proof methods (@{method auto}, @{method simp}, @{method blast},
  etc.). This corresponds to the Isar command @{command_ref "try0"} @{cite
  "isabelle-isar-ref"}.

  The tool is disabled by default, since unparameterized invocation of
  standard proof methods often consumes substantial CPU resources without
  leading to success.

  \<^item> @{system_option_ref auto_nitpick} controls a slightly reduced version of
  @{command_ref nitpick}, which tests for counterexamples using first-order
  relational logic. See also the Nitpick manual @{cite "isabelle-nitpick"}.

  This tool is disabled by default, due to the extra overhead of invoking an
  external Java process for each attempt to disprove a subgoal.

  \<^item> @{system_option_ref auto_quickcheck} controls automatic use of
  @{command_ref quickcheck}, which tests for counterexamples using a series of
  assignments for free variables of a subgoal.

  This tool is \<^emph>\<open>enabled\<close> by default. It requires little overhead, but is a
  bit weaker than @{command nitpick}.

  \<^item> @{system_option_ref auto_sledgehammer} controls a significantly reduced
  version of @{command_ref sledgehammer}, which attempts to prove a subgoal
  using external automatic provers. See also the Sledgehammer manual @{cite
  "isabelle-sledgehammer"}.

  This tool is disabled by default, due to the relatively heavy nature of
  Sledgehammer.

  \<^item> @{system_option_ref auto_solve_direct} controls automatic use of
  @{command_ref solve_direct}, which checks whether the current subgoals can
  be solved directly by an existing theorem. This also helps to detect
  duplicate lemmas.

  This tool is \<^emph>\<open>enabled\<close> by default.


  Invocation of automatically tried tools is subject to some global policies
  of parallel execution, which may be configured as follows:

  \<^item> @{system_option_ref auto_time_limit} (default 2.0) determines the timeout
  (in seconds) for each tool execution.

  \<^item> @{system_option_ref auto_time_start} (default 1.0) determines the start
  delay (in seconds) for automatically tried tools, after the main command
  evaluation is finished.


  Each tool is submitted independently to the pool of parallel execution tasks
  in Isabelle/ML, using hardwired priorities according to its relative
  ``heaviness''. The main stages of evaluation and printing of proof states
  take precedence, but an already running tool is not canceled and may thus
  reduce reactivity of proof document processing.

  Users should experiment how the available CPU resources (number of cores)
  are best invested to get additional feedback from prover in the background,
  by using a selection of weaker or stronger tools.
\<close>


section \<open>Sledgehammer \label{sec:sledgehammer}\<close>

text \<open>
  The \<^emph>\<open>Sledgehammer\<close> panel (\figref{fig:sledgehammer}) provides a view on
  some independent execution of the Isar command @{command_ref sledgehammer},
  with process indicator (spinning wheel) and GUI elements for important
  Sledgehammer arguments and options. Any number of Sledgehammer panels may be
  active, according to the standard policies of Dockable Window Management in
  jEdit. Closing such windows also cancels the corresponding prover tasks.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{sledgehammer}
  \end{center}
  \caption{An instance of the Sledgehammer panel}
  \label{fig:sledgehammer}
  \end{figure}

  The \<^emph>\<open>Apply\<close> button attaches a fresh invocation of @{command sledgehammer}
  to the command where the cursor is pointing in the text --- this should be
  some pending proof problem. Further buttons like \<^emph>\<open>Cancel\<close> and \<^emph>\<open>Locate\<close>
  help to manage the running process.

  Results appear incrementally in the output window of the panel. Proposed
  proof snippets are marked-up as \<^emph>\<open>sendback\<close>, which means a single mouse
  click inserts the text into a suitable place of the original source. Some
  manual editing may be required nonetheless, say to remove earlier proof
  attempts.
\<close>


chapter \<open>Isabelle document preparation\<close>

text \<open>
  The ultimate purpose of Isabelle is to produce nicely rendered documents
  with the Isabelle document preparation system, which is based on {\LaTeX};
  see also @{cite "isabelle-system" and "isabelle-isar-ref"}. Isabelle/jEdit
  provides some additional support for document editing.
\<close>


section \<open>Document outline\<close>

text \<open>
  Theory sources may contain document markup commands, such as @{command_ref
  chapter}, @{command_ref section}, @{command subsection}. The Isabelle
  SideKick parser (\secref{sec:sidekick}) represents this document outline as
  structured tree view, with formal statements and proofs nested inside; see
  \figref{fig:sidekick-document}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{sidekick-document}
  \end{center}
  \caption{Isabelle document outline via SideKick tree view}
  \label{fig:sidekick-document}
  \end{figure}

  It is also possible to use text folding according to this structure, by
  adjusting \<^emph>\<open>Utilities / Buffer Options / Folding mode\<close> of jEdit. The default
  mode \<^verbatim>\<open>isabelle\<close> uses the structure of formal definitions, statements, and
  proofs. The alternative mode \<^verbatim>\<open>sidekick\<close> uses the document structure of the
  SideKick parser, as explained above.
\<close>


section \<open>Markdown structure\<close>

text \<open>
  Document text is internally structured in paragraphs and nested lists, using
  notation that is similar to Markdown\<^footnote>\<open>\<^url>\<open>http://commonmark.org\<close>\<close>. There are
  special control symbols for items of different kinds of lists, corresponding
  to \<^verbatim>\<open>itemize\<close>, \<^verbatim>\<open>enumerate\<close>, \<^verbatim>\<open>description\<close> in {\LaTeX}. This is illustrated
  in for \<^verbatim>\<open>itemize\<close> in \figref{fig:markdown-document}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{markdown-document}
  \end{center}
  \caption{Markdown structure within document text}
  \label{fig:markdown-document}
  \end{figure}

  Items take colour according to the depth of nested lists. This helps to
  explore the implicit rules for list structure interactively. There is also
  markup for individual paragraphs in the text: it may be explored via mouse
  hovering with \<^verbatim>\<open>CONTROL\<close> / \<^verbatim>\<open>COMMAND\<close> as usual
  (\secref{sec:tooltips-hyperlinks}).
\<close>


section \<open>Citations and Bib{\TeX} entries \label{sec:bibtex}\<close>

text \<open>
  Citations are managed by {\LaTeX} and Bib{\TeX} in \<^verbatim>\<open>.bib\<close> files. The
  Isabelle session build process and the @{tool latex} tool @{cite
  "isabelle-system"} are smart enough to assemble the result, based on the
  session directory layout.

  The document antiquotation \<open>@{cite}\<close> is described in @{cite
  "isabelle-isar-ref"}. Within the Prover IDE it provides semantic markup for
  tooltips, hyperlinks, and completion for Bib{\TeX} database entries.
  Isabelle/jEdit does \<^emph>\<open>not\<close> know about the actual Bib{\TeX} environment used
  in {\LaTeX} batch-mode, but it can take citations from those \<^verbatim>\<open>.bib\<close> files
  that happen to be open in the editor; see \figref{fig:cite-completion}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{cite-completion}
  \end{center}
  \caption{Semantic completion of citations from open Bib{\TeX} files}
  \label{fig:cite-completion}
  \end{figure}

  Isabelle/jEdit also provides some support for editing \<^verbatim>\<open>.bib\<close> files
  themselves. There is syntax highlighting based on entry types (according to
  standard Bib{\TeX} styles), a context-menu to compose entries
  systematically, and a SideKick tree view of the overall content; see
  \figref{fig:bibtex-mode}.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{bibtex-mode}
  \end{center}
  \caption{Bib{\TeX} mode with context menu and SideKick tree view}
  \label{fig:bibtex-mode}
  \end{figure}
\<close>


chapter \<open>ML debugging within the Prover IDE\<close>

text \<open>
  Isabelle/ML is based on Poly/ML\<^footnote>\<open>\<^url>\<open>http://www.polyml.org\<close>\<close> and thus
  benefits from the source-level debugger of that implementation of Standard
  ML. The Prover IDE provides the \<^emph>\<open>Debugger\<close> dockable to connect to running
  ML threads, inspect the stack frame with local ML bindings, and evaluate ML
  expressions in a particular run-time context. A typical debugger session is
  shown in \figref{fig:ml-debugger}.

  ML debugging depends on the following pre-requisites.

    \<^enum> ML source needs to be compiled with debugging enabled. This may be
    controlled for particular chunks of ML sources using any of the subsequent
    facilities.

      \<^enum> The system option @{system_option_ref ML_debugger} as implicit state
      of the Isabelle process. It may be changed in the menu \<^emph>\<open>Plugins /
      Plugin Options / Isabelle / General\<close>. ML modules need to be reloaded and
      recompiled to pick up that option as intended.

      \<^enum> The configuration option @{attribute_ref ML_debugger}, with an
      attribute of the same name, to update a global or local context (e.g.\
      with the @{command declare} command).

      \<^enum> Commands that modify @{attribute ML_debugger} state for individual
      files: @{command_ref ML_file_debug}, @{command_ref ML_file_no_debug},
      @{command_ref SML_file_debug}, @{command_ref SML_file_no_debug}.

    The instrumentation of ML code for debugging causes minor run-time
    overhead. ML modules that implement critical system infrastructure may
    lead to deadlocks or other undefined behaviour, when put under debugger
    control!

    \<^enum> The \<^emph>\<open>Debugger\<close> panel needs to be active, otherwise the program ignores
    debugger instrumentation of the compiler and runs unmanaged. It is also
    possible to start debugging with the panel open, and later undock it, to
    let the program continue unhindered.

    \<^enum> The ML program needs to be stopped at a suitable breakpoint, which may
    be activated individually or globally as follows.

    For ML sources that have been compiled with debugger support, the IDE
    visualizes possible breakpoints in the text. A breakpoint may be toggled
    by pointing accurately with the mouse, with a right-click to activate
    jEdit's context menu and its \<^emph>\<open>Toggle Breakpoint\<close> item. Alternatively, the
    \<^emph>\<open>Break\<close> checkbox in the \<^emph>\<open>Debugger\<close> panel may be enabled to stop ML
    threads always at the next possible breakpoint.

  Note that the state of individual breakpoints \<^emph>\<open>gets lost\<close> when the
  coresponding ML source is re-compiled! This may happen unintentionally,
  e.g.\ when following hyperlinks into ML modules that have not been loaded
  into the IDE before.

  \begin{figure}[!htb]
  \begin{center}
  \includegraphics[scale=0.333]{ml-debugger}
  \end{center}
  \caption{ML debugger session}
  \label{fig:ml-debugger}
  \end{figure}

  The debugger panel (\figref{fig:ml-debugger}) shows a list of all threads
  that are presently stopped. Each thread shows a stack of all function
  invocations that lead to the current breakpoint at the top.

  It is possible to jump between stack positions freely, by clicking on this
  list. The current situation is displayed in the big output window, as a
  local ML environment with names and printed values.

  ML expressions may be evaluated in the current context by entering snippets
  of source into the text fields labeled \<open>Context\<close> and \<open>ML\<close>, and pushing the
  \<open>Eval\<close> button. By default, the source is interpreted as Isabelle/ML with the
  usual support for antiquotations (like @{command ML}, @{command ML_file}).
  Alternatively, strict Standard ML may be enforced via the \<^emph>\<open>SML\<close> checkbox
  (like @{command SML_file}).

  The context for Isabelle/ML is optional, it may evaluate to a value of type
  @{ML_type theory}, @{ML_type Proof.context}, or @{ML_type Context.generic}.
  Thus the given ML expression (with its antiquotations) may be subject to the
  intended dynamic run-time context, instead of the static compile-time
  context.

  \<^medskip>
  The buttons labeled \<^emph>\<open>Continue\<close>, \<^emph>\<open>Step\<close>, \<^emph>\<open>Step over\<close>, \<^emph>\<open>Step out\<close>
  recommence execution of the program, with different policies concerning
  nested function invocations. The debugger always moves the cursor within the
  ML source to the next breakpoint position, and offers new stack frames as
  before.
\<close>


chapter \<open>Miscellaneous tools\<close>

section \<open>Timing\<close>

text \<open>
  Managed evaluation of commands within PIDE documents includes timing
  information, which consists of elapsed (wall-clock) time, CPU time, and GC
  (garbage collection) time. Note that in a multithreaded system it is
  difficult to measure execution time precisely: elapsed time is closer to the
  real requirements of runtime resources than CPU or GC time, which are both
  subject to influences from the parallel environment that are outside the
  scope of the current command transaction.

  The \<^emph>\<open>Timing\<close> panel provides an overview of cumulative command timings for
  each document node. Commands with elapsed time below the given threshold are
  ignored in the grand total. Nodes are sorted according to their overall
  timing. For the document node that corresponds to the current buffer,
  individual command timings are shown as well. A double-click on a theory
  node or command moves the editor focus to that particular source position.

  It is also possible to reveal individual timing information via some tooltip
  for the corresponding command keyword, using the technique of mouse hovering
  with \<^verbatim>\<open>CONTROL\<close>~/ \<^verbatim>\<open>COMMAND\<close> modifier (\secref{sec:tooltips-hyperlinks}).
  Actual display of timing depends on the global option @{system_option_ref
  jedit_timing_threshold}, which can be configured in \<^emph>\<open>Plugin Options~/
  Isabelle~/ General\<close>.

  \<^medskip>
  The \<^emph>\<open>Monitor\<close> panel visualizes various data collections about recent
  activity of the Isabelle/ML task farm and the underlying ML runtime system.
  The display is continuously updated according to @{system_option_ref
  editor_chart_delay}. Note that the painting of the chart takes considerable
  runtime itself --- on the Java Virtual Machine that runs Isabelle/Scala, not
  Isabelle/ML. Internally, the Isabelle/Scala module \<^verbatim>\<open>isabelle.ML_Statistics\<close>
  provides further access to statistics of Isabelle/ML.
\<close>


section \<open>Low-level output\<close>

text \<open>
  Prover output is normally shown directly in the main text area or specific
  panels like \<^emph>\<open>Output\<close> (\secref{sec:output}) or \<^emph>\<open>State\<close>
  (\secref{sec:state-output}). Beyond this, it is occasionally useful to
  inspect low-level output channels via some of the following additional
  panels:

  \<^item> \<^emph>\<open>Protocol\<close> shows internal messages between the Isabelle/Scala and
  Isabelle/ML side of the PIDE document editing protocol. Recording of
  messages starts with the first activation of the corresponding dockable
  window; earlier messages are lost.

  Actual display of protocol messages causes considerable slowdown, so it is
  important to undock all \<^emph>\<open>Protocol\<close> panels for production work.

  \<^item> \<^emph>\<open>Raw Output\<close> shows chunks of text from the \<^verbatim>\<open>stdout\<close> and \<^verbatim>\<open>stderr\<close>
  channels of the prover process. Recording of output starts with the first
  activation of the corresponding dockable window; earlier output is lost.

  The implicit stateful nature of physical I/O channels makes it difficult to
  relate raw output to the actual command from where it was originating.
  Parallel execution may add to the confusion. Peeking at physical process I/O
  is only the last resort to diagnose problems with tools that are not PIDE
  compliant.

  Under normal circumstances, prover output always works via managed message
  channels (corresponding to @{ML writeln}, @{ML warning}, @{ML
  Output.error_message} in Isabelle/ML), which are displayed by regular means
  within the document model (\secref{sec:output}). Unhandled Isabelle/ML
  exceptions are printed by the system via @{ML Output.error_message}.

  \<^item> \<^emph>\<open>Syslog\<close> shows system messages that might be relevant to diagnose
  problems with the startup or shutdown phase of the prover process; this also
  includes raw output on \<^verbatim>\<open>stderr\<close>. Isabelle/ML also provides an explicit @{ML
  Output.system_message} operation, which is occasionally useful for
  diagnostic purposes within the system infrastructure itself.

  A limited amount of syslog messages are buffered, independently of the
  docking state of the \<^emph>\<open>Syslog\<close> panel. This allows to diagnose serious
  problems with Isabelle/PIDE process management, outside of the actual
  protocol layer.

  Under normal situations, such low-level system output can be ignored.
\<close>


chapter \<open>Known problems and workarounds \label{sec:problems}\<close>

text \<open>
  \<^item> \<^bold>\<open>Problem:\<close> Odd behavior of some diagnostic commands with global
  side-effects, like writing a physical file.

  \<^bold>\<open>Workaround:\<close> Copy/paste complete command text from elsewhere, or disable
  continuous checking temporarily.

  \<^item> \<^bold>\<open>Problem:\<close> No direct support to remove document nodes from the collection
  of theories.

  \<^bold>\<open>Workaround:\<close> Clear the buffer content of unused files and close \<^emph>\<open>without\<close>
  saving changes.

  \<^item> \<^bold>\<open>Problem:\<close> Keyboard shortcuts \<^verbatim>\<open>C+PLUS\<close> and \<^verbatim>\<open>C+MINUS\<close> for adjusting the
  editor font size depend on platform details and national keyboards.

  \<^bold>\<open>Workaround:\<close> Rebind keys via \<^emph>\<open>Global Options~/ Shortcuts\<close>.

  \<^item> \<^bold>\<open>Problem:\<close> The Mac OS X key sequence \<^verbatim>\<open>COMMAND+COMMA\<close> for application
  \<^emph>\<open>Preferences\<close> is in conflict with the jEdit default keyboard shortcut for
  \<^emph>\<open>Incremental Search Bar\<close> (action @{action_ref "quick-search"}).

  \<^bold>\<open>Workaround:\<close> Rebind key via \<^emph>\<open>Global Options~/ Shortcuts\<close> according to
  national keyboard, e.g.\ \<^verbatim>\<open>COMMAND+SLASH\<close> on English ones.

  \<^item> \<^bold>\<open>Problem:\<close> On Mac OS X with native Apple look-and-feel, some exotic
  national keyboards may cause a conflict of menu accelerator keys with
  regular jEdit key bindings. This leads to duplicate execution of the
  corresponding jEdit action.

  \<^bold>\<open>Workaround:\<close> Disable the native Apple menu bar via Java runtime option
  \<^verbatim>\<open>-Dapple.laf.useScreenMenuBar=false\<close>.

  \<^item> \<^bold>\<open>Problem:\<close> Mac OS X system fonts sometimes lead to character drop-outs in
  the main text area.

  \<^bold>\<open>Workaround:\<close> Use the default \<^verbatim>\<open>IsabelleText\<close> font.

  \<^item> \<^bold>\<open>Problem:\<close> Mac OS X with Retina display has problems to determine the
  font metrics of \<^verbatim>\<open>IsabelleText\<close> accurately, notably in plain Swing text
  fields (e.g.\ in the \<^emph>\<open>Search and Replace\<close> dialog).

  \<^bold>\<open>Workaround:\<close> Install \<^verbatim>\<open>IsabelleText\<close> and \<^verbatim>\<open>IsabelleTextBold\<close> on the system
  with \<^emph>\<open>Font Book\<close>, despite the warnings in \secref{sec:symbols} against
  that! The \<^verbatim>\<open>.ttf\<close> font files reside in some directory @{path
  "$ISABELLE_HOME/contrib/isabelle_fonts-XYZ"}.

  \<^item> \<^bold>\<open>Problem:\<close> Some Linux/X11 input methods such as IBus tend to disrupt key
  event handling of Java/AWT/Swing.

  \<^bold>\<open>Workaround:\<close> Do not use X11 input methods. Note that environment variable
  \<^verbatim>\<open>XMODIFIERS\<close> is reset by default within Isabelle settings.

  \<^item> \<^bold>\<open>Problem:\<close> Some Linux/X11 window managers that are not ``re-parenting''
  cause problems with additional windows opened by Java. This affects either
  historic or neo-minimalistic window managers like \<^verbatim>\<open>awesome\<close> or \<^verbatim>\<open>xmonad\<close>.

  \<^bold>\<open>Workaround:\<close> Use a regular re-parenting X11 window manager.

  \<^item> \<^bold>\<open>Problem:\<close> Various forks of Linux/X11 window managers and desktop
  environments (like Gnome) disrupt the handling of menu popups and mouse
  positions of Java/AWT/Swing.

  \<^bold>\<open>Workaround:\<close> Use suitable version of Linux desktops.

  \<^item> \<^bold>\<open>Problem:\<close> Full-screen mode via jEdit action @{action_ref
  "toggle-full-screen"} (default keyboard shortcut \<^verbatim>\<open>F11\<close>) works on Windows,
  but not on Mac OS X or various Linux/X11 window managers.

  \<^bold>\<open>Workaround:\<close> Use native full-screen control of the window manager (notably
  on Mac OS X).
\<close>

end