(* $Id$ *)
theory Inner_Syntax
imports Main
begin
chapter {* Inner syntax --- the term language *}
section {* Printing logical entities *}
subsection {* Diagnostic commands *}
text {*
\begin{matharray}{rcl}
@{command_def "typ"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "term"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "prop"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "thm"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "prf"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "full_prf"}@{text "\<^sup>*"} & : & @{text "context \<rightarrow>"} \\
@{command_def "pr"}@{text "\<^sup>*"} & : & @{text "any \<rightarrow>"} \\
\end{matharray}
These diagnostic commands assist interactive development by printing
internal logical entities in a human-readable fashion.
\begin{rail}
'typ' modes? type
;
'term' modes? term
;
'prop' modes? prop
;
'thm' modes? thmrefs
;
( 'prf' | 'full\_prf' ) modes? thmrefs?
;
'pr' modes? nat? (',' nat)?
;
modes: '(' (name + ) ')'
;
\end{rail}
\begin{description}
\item @{command "typ"}~@{text \<tau>} reads and prints types of the
meta-logic according to the current theory or proof context.
\item @{command "term"}~@{text t} and @{command "prop"}~@{text \<phi>}
read, type-check and print terms or propositions according to the
current theory or proof context; the inferred type of @{text t} is
output as well. Note that these commands are also useful in
inspecting the current environment of term abbreviations.
\item @{command "thm"}~@{text "a\<^sub>1 \<dots> a\<^sub>n"} retrieves
theorems from the current theory or proof context. Note that any
attributes included in the theorem specifications are applied to a
temporary context derived from the current theory or proof; the
result is discarded, i.e.\ attributes involved in @{text "a\<^sub>1,
\<dots>, a\<^sub>n"} do not have any permanent effect.
\item @{command "prf"} displays the (compact) proof term of the
current proof state (if present), or of the given theorems. Note
that this requires proof terms to be switched on for the current
object logic (see the ``Proof terms'' section of the Isabelle
reference manual for information on how to do this).
\item @{command "full_prf"} is like @{command "prf"}, but displays
the full proof term, i.e.\ also displays information omitted in the
compact proof term, which is denoted by ``@{text _}'' placeholders
there.
\item @{command "pr"}~@{text "goals, prems"} prints the current
proof state (if present), including the proof context, current facts
and goals. The optional limit arguments affect the number of goals
and premises to be displayed, which is initially 10 for both.
Omitting limit values leaves the current setting unchanged.
\end{description}
All of the diagnostic commands above admit a list of @{text modes}
to be specified, which is appended to the current print mode (see
also \cite{isabelle-ref}). Thus the output behavior may be modified
according particular print mode features. For example, @{command
"pr"}~@{text "(latex xsymbols)"} would print the current proof state
with mathematical symbols and special characters represented in
{\LaTeX} source, according to the Isabelle style
\cite{isabelle-sys}.
Note that antiquotations (cf.\ \secref{sec:antiq}) provide a more
systematic way to include formal items into the printed text
document.
*}
subsection {* Details of printed content *}
text {*
\begin{mldecls}
@{index_ML show_types: "bool ref"} & default @{ML false} \\
@{index_ML show_sorts: "bool ref"} & default @{ML false} \\
@{index_ML show_consts: "bool ref"} & default @{ML false} \\
@{index_ML long_names: "bool ref"} & default @{ML false} \\
@{index_ML short_names: "bool ref"} & default @{ML false} \\
@{index_ML unique_names: "bool ref"} & default @{ML true} \\
@{index_ML show_brackets: "bool ref"} & default @{ML false} \\
@{index_ML eta_contract: "bool ref"} & default @{ML true} \\
@{index_ML goals_limit: "int ref"} & default @{ML 10} \\
@{index_ML Proof.show_main_goal: "bool ref"} & default @{ML false} \\
@{index_ML show_hyps: "bool ref"} & default @{ML false} \\
@{index_ML show_tags: "bool ref"} & default @{ML false} \\
@{index_ML show_question_marks: "bool ref"} & default @{ML true} \\
\end{mldecls}
These global ML variables control the detail of information that is
displayed for types, terms, theorems, goals etc.
In interactive sessions, the user interface usually manages these
global parameters of the Isabelle process, even with some concept of
persistence. Nonetheless it is occasionally useful to manipulate ML
variables directly, e.g.\ using @{command "ML_val"} or @{command
"ML_command"}.
Batch-mode logic sessions may be configured by putting appropriate
ML text directly into the @{verbatim ROOT.ML} file.
\begin{description}
\item @{ML show_types} and @{ML show_sorts} control printing of type
constraints for term variables, and sort constraints for type
variables. By default, neither of these are shown in output. If
@{ML show_sorts} is set to @{ML true}, types are always shown as
well.
Note that displaying types and sorts may explain why a polymorphic
inference rule fails to resolve with some goal, or why a rewrite
rule does not apply as expected.
\item @{ML show_consts} controls printing of types of constants when
displaying a goal state.
Note that the output can be enormous, because polymorphic constants
often occur at several different type instances.
\item @{ML long_names}, @{ML short_names}, and @{ML unique_names}
control the way of printing fully qualified internal names in
external form. See also \secref{sec:antiq} for the document
antiquotation options of the same names.
\item @{ML show_brackets} controls bracketing in pretty printed
output. If set to @{ML true}, all sub-expressions of the pretty
printing tree will be parenthesized, even if this produces malformed
term syntax! This crude way of showing the internal structure of
pretty printed entities may occasionally help to diagnose problems
with operator priorities, for example.
\item @{ML eta_contract} controls @{text "\<eta>"}-contracted printing of
terms.
The @{text \<eta>}-contraction law asserts @{prop "(\<lambda>x. f x) \<equiv> f"},
provided @{text x} is not free in @{text f}. It asserts
\emph{extensionality} of functions: @{prop "f \<equiv> g"} if @{prop "f x \<equiv>
g x"} for all @{text x}. Higher-order unification frequently puts
terms into a fully @{text \<eta>}-expanded form. For example, if @{text
F} has type @{text "(\<tau> \<Rightarrow> \<tau>) \<Rightarrow> \<tau>"} then its expanded form is @{term
"\<lambda>h. F (\<lambda>x. h x)"}.
Setting @{ML eta_contract} makes Isabelle perform @{text
\<eta>}-contractions before printing, so that @{term "\<lambda>h. F (\<lambda>x. h x)"}
appears simply as @{text F}.
Note that the distinction between a term and its @{text \<eta>}-expanded
form occasionally matters. While higher-order resolution and
rewriting operate modulo @{text "\<alpha>\<beta>\<eta>"}-conversion, some other tools
might look at terms more discretely.
\item @{ML goals_limit} controls the maximum number of subgoals to
be shown in goal output.
\item @{ML Proof.show_main_goal} controls whether the main result to
be proven should be displayed. This information might be relevant
for schematic goals, to inspect the current claim that has been
synthesized so far.
\item @{ML show_hyps} controls printing of implicit hypotheses of
local facts. Normally, only those hypotheses are displayed that are
\emph{not} covered by the assumptions of the current context: this
situation indicates a fault in some tool being used.
By setting @{ML show_hyps} to @{ML true}, output of \emph{all}
hypotheses can be enforced, which is occasionally useful for
diagnostic purposes.
\item @{ML show_tags} controls printing of extra annotations within
theorems, such as internal position information, or the case names
being attached by the attribute @{attribute case_names}.
Note that the @{attribute tagged} and @{attribute untagged}
attributes provide low-level access to the collection of tags
associated with a theorem.
\item @{ML show_question_marks} controls printing of question marks
for schematic variables, such as @{text ?x}. Only the leading
question mark is affected, the remaining text is unchanged
(including proper markup for schematic variables that might be
relevant for user interfaces).
\end{description}
*}
subsection {* Printing limits *}
text {*
\begin{mldecls}
@{index_ML Pretty.setdepth: "int -> unit"} \\
@{index_ML Pretty.setmargin: "int -> unit"} \\
@{index_ML print_depth: "int -> unit"} \\
\end{mldecls}
These ML functions set limits for pretty printed text.
\begin{description}
\item @{ML Pretty.setdepth}~@{text d} tells the pretty printer to
limit the printing depth to @{text d}. This affects the display of
types, terms, theorems etc. The default value is 0, which permits
printing to an arbitrary depth. Other useful values for @{text d}
are 10 and 20.
\item @{ML Pretty.setmargin}~@{text m} tells the pretty printer to
assume a right margin (page width) of @{text m}. The initial margin
is 76, but user interfaces might adapt the margin automatically when
resizing windows.
\item @{ML print_depth}~@{text n} limits the printing depth of the
ML toplevel pretty printer; the precise effect depends on the ML
compiler and run-time system. Typically @{text n} should be less
than 10. Bigger values such as 100--1000 are useful for debugging.
\end{description}
*}
section {* Mixfix annotations *}
text {* Mixfix annotations specify concrete \emph{inner syntax} of
Isabelle types and terms. Some commands such as @{command
"typedecl"} admit infixes only, while @{command "definition"} etc.\
support the full range of general mixfixes and binders. Fixed
parameters in toplevel theorem statements, locale specifications
also admit mixfix annotations.
\indexouternonterm{infix}\indexouternonterm{mixfix}\indexouternonterm{structmixfix}
\begin{rail}
infix: '(' ('infix' | 'infixl' | 'infixr') string nat ')'
;
mixfix: infix | '(' string prios? nat? ')' | '(' 'binder' string prios? nat ')'
;
structmixfix: mixfix | '(' 'structure' ')'
;
prios: '[' (nat + ',') ']'
;
\end{rail}
Here the \railtok{string} specifications refer to the actual mixfix
template, which may include literal text, spacing, blocks, and
arguments (denoted by ``@{text _}''); the special symbol
``@{verbatim "\<index>"}'' (printed as ``@{text "\<index>"}'') represents an index
argument that specifies an implicit structure reference (see also
\secref{sec:locale}). Infix and binder declarations provide common
abbreviations for particular mixfix declarations. So in practice,
mixfix templates mostly degenerate to literal text for concrete
syntax, such as ``@{verbatim "++"}'' for an infix symbol.
\medskip In full generality, mixfix declarations work as follows.
Suppose a constant @{text "c :: \<tau>\<^sub>1 \<Rightarrow> \<dots> \<tau>\<^sub>n \<Rightarrow> \<tau>"} is
annotated by @{text "(mixfix [p\<^sub>1, \<dots>, p\<^sub>n] p)"}, where @{text
"mixfix"} is a string @{text "d\<^sub>0 _ d\<^sub>1 _ \<dots> _ d\<^sub>n"} consisting of
delimiters that surround argument positions as indicated by
underscores.
Altogether this determines a production for a context-free priority
grammar, where for each argument @{text "i"} the syntactic category
is determined by @{text "\<tau>\<^sub>i"} (with priority @{text "p\<^sub>i"}), and
the result category is determined from @{text "\<tau>"} (with
priority @{text "p"}). Priority specifications are optional, with
default 0 for arguments and 1000 for the result.
Since @{text "\<tau>"} may be again a function type, the constant
type scheme may have more argument positions than the mixfix
pattern. Printing a nested application @{text "c t\<^sub>1 \<dots> t\<^sub>m"} for
@{text "m > n"} works by attaching concrete notation only to the
innermost part, essentially by printing @{text "(c t\<^sub>1 \<dots> t\<^sub>n) \<dots> t\<^sub>m"}
instead. If a term has fewer arguments than specified in the mixfix
template, the concrete syntax is ignored.
\medskip A mixfix template may also contain additional directives
for pretty printing, notably spaces, blocks, and breaks. The
general template format is a sequence over any of the following
entities.
\begin{itemize}
\item @{text "d"} is a delimiter, namely a non-empty sequence of
characters other than the following special characters:
\smallskip
\begin{tabular}{ll}
@{verbatim "'"} & single quote \\
@{verbatim "_"} & underscore \\
@{text "\<index>"} & index symbol \\
@{verbatim "("} & open parenthesis \\
@{verbatim ")"} & close parenthesis \\
@{verbatim "/"} & slash \\
\end{tabular}
\medskip
\item @{verbatim "'"} escapes the special meaning of these
meta-characters, producing a literal version of the following
character, unless that is a blank.
A single quote followed by a blank separates delimiters, without
affecting printing, but input tokens may have additional white space
here.
\item @{verbatim "_"} is an argument position, which stands for a
certain syntactic category in the underlying grammar.
\item @{text "\<index>"} is an indexed argument position; this is the place
where implicit structure arguments can be attached.
\item @{text "s"} is a non-empty sequence of spaces for printing.
This and the following specifications do not affect parsing at all.
\item @{verbatim "("}@{text n} opens a pretty printing block. The
optional number specifies how much indentation to add when a line
break occurs within the block. If the parenthesis is not followed
by digits, the indentation defaults to 0. A block specified via
@{verbatim "(00"} is unbreakable.
\item @{verbatim ")"} closes a pretty printing block.
\item @{verbatim "//"} forces a line break.
\item @{verbatim "/"}@{text s} allows a line break. Here @{text s}
stands for the string of spaces (zero or more) right after the
slash. These spaces are printed if the break is \emph{not} taken.
\end{itemize}
For example, the template @{verbatim "(_ +/ _)"} specifies an infix
operator. There are two argument positions; the delimiter
@{verbatim "+"} is preceded by a space and followed by a space or
line break; the entire phrase is a pretty printing block.
The general idea of pretty printing with blocks and breaks is also
described in \cite{paulson-ml2}.
*}
section {* Explicit term notation *}
text {*
\begin{matharray}{rcll}
@{command_def "notation"} & : & @{text "local_theory \<rightarrow> local_theory"} \\
@{command_def "no_notation"} & : & @{text "local_theory \<rightarrow> local_theory"} \\
\end{matharray}
\begin{rail}
('notation' | 'no\_notation') target? mode? (nameref structmixfix + 'and')
;
\end{rail}
\begin{description}
\item @{command "notation"}~@{text "c (mx)"} associates mixfix
syntax with an existing constant or fixed variable. This is a
robust interface to the underlying @{command "syntax"} primitive
(\secref{sec:syn-trans}). Type declaration and internal syntactic
representation of the given entity is retrieved from the context.
\item @{command "no_notation"} is similar to @{command "notation"},
but removes the specified syntax annotation from the present
context.
\end{description}
*}
section {* The Pure syntax *}
subsection {* Priority grammars *}
text {* A context-free grammar consists of a set of \emph{terminal
symbols}, a set of \emph{nonterminal symbols} and a set of
\emph{productions}. Productions have the form @{text "A = \<gamma>"},
where @{text A} is a nonterminal and @{text \<gamma>} is a string of
terminals and nonterminals. One designated nonterminal is called
the \emph{root symbol}. The language defined by the grammar
consists of all strings of terminals that can be derived from the
root symbol by applying productions as rewrite rules.
The standard Isabelle parser for inner syntax uses a \emph{priority
grammar}. Each nonterminal is decorated by an integer priority:
@{text "A\<^sup>(\<^sup>p\<^sup>)"}. In a derivation, @{text "A\<^sup>(\<^sup>p\<^sup>)"} may be rewritten
using a production @{text "A\<^sup>(\<^sup>q\<^sup>) = \<gamma>"} only if @{text "p \<le> q"}. Any
priority grammar can be translated into a normal context-free
grammar by introducing new nonterminals and productions.
\medskip Formally, a set of context free productions @{text G}
induces a derivation relation @{text "\<longrightarrow>\<^sub>G"} as follows. Let @{text
\<alpha>} and @{text \<beta>} denote strings of terminal or nonterminal symbols.
Then @{text "\<alpha> A\<^sup>(\<^sup>p\<^sup>) \<beta> \<longrightarrow>\<^sub>G \<alpha> \<gamma> \<beta>"} holds if and only if @{text G}
contains some production @{text "A\<^sup>(\<^sup>q\<^sup>) = \<gamma>"} for @{text "p \<le> q"}.
\medskip The following grammar for arithmetic expressions
demonstrates how binding power and associativity of operators can be
enforced by priorities.
\begin{center}
\begin{tabular}{rclr}
@{text "A\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>)"} & @{text "="} & @{verbatim "("} @{text "A\<^sup>(\<^sup>0\<^sup>)"} @{verbatim ")"} \\
@{text "A\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>)"} & @{text "="} & @{verbatim 0} \\
@{text "A\<^sup>(\<^sup>0\<^sup>)"} & @{text "="} & @{text "A\<^sup>(\<^sup>0\<^sup>)"} @{verbatim "+"} @{text "A\<^sup>(\<^sup>1\<^sup>)"} \\
@{text "A\<^sup>(\<^sup>2\<^sup>)"} & @{text "="} & @{text "A\<^sup>(\<^sup>3\<^sup>)"} @{verbatim "*"} @{text "A\<^sup>(\<^sup>2\<^sup>)"} \\
@{text "A\<^sup>(\<^sup>3\<^sup>)"} & @{text "="} & @{verbatim "-"} @{text "A\<^sup>(\<^sup>3\<^sup>)"} \\
\end{tabular}
\end{center}
The choice of priorities determines that @{verbatim "-"} binds
tighter than @{verbatim "*"}, which binds tighter than @{verbatim
"+"}. Furthermore @{verbatim "+"} associates to the left and
@{verbatim "*"} to the right.
\medskip For clarity, grammars obey these conventions:
\begin{itemize}
\item All priorities must lie between 0 and 1000.
\item Priority 0 on the right-hand side and priority 1000 on the
left-hand side may be omitted.
\item The production @{text "A\<^sup>(\<^sup>p\<^sup>) = \<alpha>"} is written as @{text "A = \<alpha>
(p)"}, i.e.\ the priority of the left-hand side actually appears in
a column on the far right.
\item Alternatives are separated by @{text "|"}.
\item Repetition is indicated by dots @{text "(\<dots>)"} in an informal
but obvious way.
\end{itemize}
Using these conventions, the example grammar specification above
takes the form:
\begin{center}
\begin{tabular}{rclc}
@{text A} & @{text "="} & @{verbatim "("} @{text A} @{verbatim ")"} \\
& @{text "|"} & @{verbatim 0} & \qquad\qquad \\
& @{text "|"} & @{text A} @{verbatim "+"} @{text "A\<^sup>(\<^sup>1\<^sup>)"} & @{text "(0)"} \\
& @{text "|"} & @{text "A\<^sup>(\<^sup>3\<^sup>)"} @{verbatim "*"} @{text "A\<^sup>(\<^sup>2\<^sup>)"} & @{text "(2)"} \\
& @{text "|"} & @{verbatim "-"} @{text "A\<^sup>(\<^sup>3\<^sup>)"} & @{text "(3)"} \\
\end{tabular}
\end{center}
*}
subsection {* The Pure grammar *}
text {*
The priority grammar of the @{text "Pure"} theory is defined as follows:
%FIXME syntax for "index" (?)
%FIXME "op" versions of ==> etc. (?)
\begin{center}
\begin{supertabular}{rclr}
@{text any} & = & @{text "prop | logic"} \\\\
@{text prop} & = & @{verbatim "("} @{text prop} @{verbatim ")"} \\
& @{text "|"} & @{text "prop\<^sup>(\<^sup>4\<^sup>)"} @{verbatim "::"} @{text type} & @{text "(3)"} \\
& @{text "|"} & @{text "any\<^sup>(\<^sup>3\<^sup>)"} @{verbatim "=?="} @{text "any\<^sup>(\<^sup>2\<^sup>)"} & @{text "(2)"} \\
& @{text "|"} & @{text "any\<^sup>(\<^sup>3\<^sup>)"} @{verbatim "=="} @{text "any\<^sup>(\<^sup>2\<^sup>)"} & @{text "(2)"} \\
& @{text "|"} & @{text "any\<^sup>(\<^sup>3\<^sup>)"} @{text "\<equiv>"} @{text "any\<^sup>(\<^sup>2\<^sup>)"} & @{text "(2)"} \\
& @{text "|"} & @{text "prop\<^sup>(\<^sup>2\<^sup>)"} @{verbatim "==>"} @{text "prop\<^sup>(\<^sup>1\<^sup>)"} & @{text "(1)"} \\
& @{text "|"} & @{text "prop\<^sup>(\<^sup>2\<^sup>)"} @{text "\<Longrightarrow>"} @{text "prop\<^sup>(\<^sup>1\<^sup>)"} & @{text "(1)"} \\
& @{text "|"} & @{verbatim "[|"} @{text prop} @{verbatim ";"} @{text "\<dots>"} @{verbatim ";"} @{text prop} @{verbatim "|]"} @{verbatim "==>"} @{text "prop\<^sup>(\<^sup>1\<^sup>)"} & @{text "(1)"} \\
& @{text "|"} & @{text "\<lbrakk>"} @{text prop} @{verbatim ";"} @{text "\<dots>"} @{verbatim ";"} @{text prop} @{text "\<rbrakk>"} @{text "\<Longrightarrow>"} @{text "prop\<^sup>(\<^sup>1\<^sup>)"} & @{text "(1)"} \\
& @{text "|"} & @{verbatim "!!"} @{text idts} @{verbatim "."} @{text prop} & @{text "(0)"} \\
& @{text "|"} & @{text "\<And>"} @{text idts} @{verbatim "."} @{text prop} & @{text "(0)"} \\
& @{text "|"} & @{verbatim OFCLASS} @{verbatim "("} @{text type} @{verbatim ","} @{text logic} @{verbatim ")"} \\
& @{text "|"} & @{verbatim SORT_CONSTRAINT} @{verbatim "("} @{text type} @{verbatim ")"} \\
& @{text "|"} & @{verbatim PROP} @{text aprop} \\\\
@{text aprop} & = & @{text "id | longid | var | "}@{verbatim "_"}@{text " | "}@{verbatim "..."} \\
& @{text "|"} & @{text "logic\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) any\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) \<dots> any\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>)"} & @{text "(999)"} \\\\
@{text logic} & = & @{verbatim "("} @{text logic} @{verbatim ")"} \\
& @{text "|"} & @{text "logic\<^sup>(\<^sup>4\<^sup>)"} @{verbatim "::"} @{text type} & @{text "(3)"} \\
& @{text "|"} & @{text "id | longid | var | "}@{verbatim "_"}@{text " | "}@{verbatim "..."} \\
& @{text "|"} & @{text "logic\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) any\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) \<dots> any\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>)"} & @{text "(999)"} \\
& @{text "|"} & @{verbatim "%"} @{text pttrns} @{verbatim "."} @{text "any\<^sup>(\<^sup>3\<^sup>)"} & @{text "(3)"} \\
& @{text "|"} & @{text \<lambda>} @{text pttrns} @{verbatim "."} @{text "any\<^sup>(\<^sup>3\<^sup>)"} & @{text "(3)"} \\
& @{text "|"} & @{verbatim CONST} @{text "id | "}@{verbatim CONST} @{text "longid"} \\
& @{text "|"} & @{verbatim TYPE} @{verbatim "("} @{text type} @{verbatim ")"} \\\\
@{text idt} & = & @{verbatim "("} @{text idt} @{verbatim ")"}@{text " | id | "}@{verbatim "_"} \\
& @{text "|"} & @{text id} @{verbatim "::"} @{text type} & @{text "(0)"} \\
& @{text "|"} & @{verbatim "_"} @{verbatim "::"} @{text type} & @{text "(0)"} \\\\
@{text idts} & = & @{text "idt | idt\<^sup>(\<^sup>1\<^sup>) idts"} & @{text "(0)"} \\\\
@{text pttrn} & = & @{text idt} \\\\
@{text pttrns} & = & @{text "pttrn | pttrn\<^sup>(\<^sup>1\<^sup>) pttrns"} & @{text "(0)"} \\\\
@{text type} & = & @{verbatim "("} @{text type} @{verbatim ")"} \\
& @{text "|"} & @{text "tid | tvar | "}@{verbatim "_"} \\
& @{text "|"} & @{text "tid"} @{verbatim "::"} @{text "sort | tvar "}@{verbatim "::"} @{text "sort | "}@{verbatim "_"} @{verbatim "::"} @{text "sort"} \\
& @{text "|"} & @{text "id | type\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) id | "}@{verbatim "("} @{text type} @{verbatim ","} @{text "\<dots>"} @{verbatim ","} @{text type} @{verbatim ")"} @{text id} \\
& @{text "|"} & @{text "longid | type\<^sup>(\<^sup>1\<^sup>0\<^sup>0\<^sup>0\<^sup>) longid | "}@{verbatim "("} @{text type} @{verbatim ","} @{text "\<dots>"} @{verbatim ","} @{text type} @{verbatim ")"} @{text longid} \\
& @{text "|"} & @{text "type\<^sup>(\<^sup>1\<^sup>)"} @{verbatim "=>"} @{text type} & @{text "(0)"} \\
& @{text "|"} & @{text "type\<^sup>(\<^sup>1\<^sup>)"} @{text "\<Rightarrow>"} @{text type} & @{text "(0)"} \\
& @{text "|"} & @{verbatim "["} @{text type} @{verbatim ","} @{text "\<dots>"} @{verbatim ","} @{text type} @{verbatim "]"} @{verbatim "=>"} @{text type} & @{text "(0)"} \\
& @{text "|"} & @{verbatim "["} @{text type} @{verbatim ","} @{text "\<dots>"} @{verbatim ","} @{text type} @{verbatim "]"} @{text "\<Rightarrow>"} @{text type} & @{text "(0)"} \\\\
@{text sort} & = & @{text "id | longid | "}@{verbatim "{}"}@{text " | "}@{verbatim "{"} @{text "(id | longid)"} @{verbatim ","} @{text "\<dots>"} @{verbatim ","} @{text "(id | longid)"} @{verbatim "}"} \\
\end{supertabular}
\end{center}
\medskip Here literal terminals are printed @{verbatim "verbatim"};
see also \secref{sec:inner-lex} for further token categories of the
inner syntax. The meaning of the nonterminals defined by the above
grammar is as follows:
\begin{description}
\item @{text any} denotes any term.
\item @{text prop} denotes meta-level propositions, which are terms
of type @{typ prop}. The syntax of such formulae of the meta-logic
is carefully distinguished from usual conventions for object-logics.
In particular, plain @{text "\<lambda>"}-term notation is \emph{not}
recognized as @{text "prop"}.
\item @{text aprop} denotes atomic propositions, which are embedded
into regular @{typ prop} by means of an explicit @{verbatim PROP}
token.
Terms of type @{typ prop} with non-constant head, e.g.\ a plain
variable, are printed in this form. Constants that yield type @{typ
prop} are expected to provide their own concrete syntax; otherwise
the printed version will appear like @{typ logic} and cannot be
parsed again as @{typ prop}.
\item @{text logic} denotes arbitrary terms of a logical type,
excluding type @{typ prop}. This is the main syntactic category of
object-logic entities, covering plain @{text \<lambda>}-term notation
(variables, abstraction, application), plus anything defined by the
user.
When specifying notation for logical entities, all logical types
(excluding @{typ prop}) are \emph{collapsed} to this single category
of @{typ logic}.
\item @{text idt} denotes identifiers, possibly constrained by
types.
\item @{text idts} denotes a sequence of @{text idt}. This is the
most basic category for variables in iterated binders, such as
@{text "\<lambda>"} or @{text "\<And>"}.
\item @{text pttrn} and @{text pttrns} denote patterns for
abstraction, cases bindings etc. In Pure, these categories start as
a merely copy of @{text idt} and @{text idts}, respectively.
Object-logics may add additional productions for binding forms.
\item @{text type} denotes types of the meta-logic.
\item @{text sort} denotes meta-level sorts.
\end{description}
Here are some further explanations of certain syntax features.
\begin{itemize}
\item In @{text idts}, note that @{text "x :: nat y"} is parsed as
@{text "x :: (nat y)"}, treating @{text y} like a type constructor
applied to @{text nat}. To avoid this interpretation, write @{text
"(x :: nat) y"} with explicit parentheses.
\item Similarly, @{text "x :: nat y :: nat"} is parsed as @{text "x ::
(nat y :: nat)"}. The correct form is @{text "(x :: nat) (y ::
nat)"}, or @{text "(x :: nat) y :: nat"} if @{text y} is last in the
sequence of identifiers.
\item Type constraints for terms bind very weakly. For example,
@{text "x < y :: nat"} is normally parsed as @{text "(x < y) ::
nat"}, unless @{text "<"} has a very low priority, in which case the
input is likely to be ambiguous. The correct form is @{text "x < (y
:: nat)"}.
\item Constraints may be either written with two literal colons
``@{verbatim "::"}'' or the double-colon symbol @{verbatim "\<Colon>"},
which actually looks exactly the same in some {\LaTeX} styles.
\item Dummy variables (written as underscore) may occur in different
roles.
\begin{description}
\item A type ``@{text "_"}'' or ``@{text "_ :: sort"}'' acts like an
anonymous inference parameter, which is filled-in according to the
most general type produced by the type-checking phase.
\item A bound ``@{text "_"}'' refers to a vacuous abstraction, where
the body does not refer to the binding introduced here. As in the
term @{term "\<lambda>x _. x"}, which is @{text "\<alpha>"}-equivalent to @{text
"\<lambda>x y. x"}.
\item A free ``@{text "_"}'' refers to an implicit outer binding.
Higher definitional packages usually allow forms like @{text "f x _
= x"}.
\item A schematic ``@{text "_"}'' (within a term pattern, see
\secref{sec:term-decls}) refers to an anonymous variable that is
implicitly abstracted over its context of locally bound variables.
For example, this allows pattern matching of @{text "{x. f x = g
x}"} against @{text "{x. _ = _}"}, or even @{text "{_. _ = _}"} by
using both bound and schematic dummies.
\end{description}
\item The three literal dots ``@{verbatim "..."}'' may be also
written as ellipsis symbol @{verbatim "\<dots>"}. In both cases this
refers to a special schematic variable, which is bound in the
context. This special term abbreviation works nicely with
calculational reasoning (\secref{sec:calculation}).
\end{itemize}
*}
section {* Lexical matters \label{sec:inner-lex} *}
text FIXME
section {* Syntax and translations \label{sec:syn-trans} *}
text {*
\begin{matharray}{rcl}
@{command_def "nonterminals"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "syntax"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "no_syntax"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "translations"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "no_translations"} & : & @{text "theory \<rightarrow> theory"} \\
\end{matharray}
\begin{rail}
'nonterminals' (name +)
;
('syntax' | 'no\_syntax') mode? (constdecl +)
;
('translations' | 'no\_translations') (transpat ('==' | '=>' | '<=' | rightleftharpoons | rightharpoonup | leftharpoondown) transpat +)
;
mode: ('(' ( name | 'output' | name 'output' ) ')')
;
transpat: ('(' nameref ')')? string
;
\end{rail}
\begin{description}
\item @{command "nonterminals"}~@{text c} declares a type
constructor @{text c} (without arguments) to act as purely syntactic
type: a nonterminal symbol of the inner syntax.
\item @{command "syntax"}~@{text "(mode) decls"} is similar to
@{command "consts"}~@{text decls}, except that the actual logical
signature extension is omitted. Thus the context free grammar of
Isabelle's inner syntax may be augmented in arbitrary ways,
independently of the logic. The @{text mode} argument refers to the
print mode that the grammar rules belong; unless the @{keyword_ref
"output"} indicator is given, all productions are added both to the
input and output grammar.
\item @{command "no_syntax"}~@{text "(mode) decls"} removes grammar
declarations (and translations) resulting from @{text decls}, which
are interpreted in the same manner as for @{command "syntax"} above.
\item @{command "translations"}~@{text rules} specifies syntactic
translation rules (i.e.\ macros): parse~/ print rules (@{text "\<rightleftharpoons>"}),
parse rules (@{text "\<rightharpoonup>"}), or print rules (@{text "\<leftharpoondown>"}).
Translation patterns may be prefixed by the syntactic category to be
used for parsing; the default is @{text logic}.
\item @{command "no_translations"}~@{text rules} removes syntactic
translation rules, which are interpreted in the same manner as for
@{command "translations"} above.
\end{description}
*}
section {* Syntax translation functions *}
text {*
\begin{matharray}{rcl}
@{command_def "parse_ast_translation"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "parse_translation"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "print_translation"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "typed_print_translation"} & : & @{text "theory \<rightarrow> theory"} \\
@{command_def "print_ast_translation"} & : & @{text "theory \<rightarrow> theory"} \\
\end{matharray}
\begin{rail}
( 'parse\_ast\_translation' | 'parse\_translation' | 'print\_translation' |
'typed\_print\_translation' | 'print\_ast\_translation' ) ('(advanced)')? text
;
\end{rail}
Syntax translation functions written in ML admit almost arbitrary
manipulations of Isabelle's inner syntax. Any of the above commands
have a single \railqtok{text} argument that refers to an ML
expression of appropriate type, which are as follows by default:
%FIXME proper antiquotations
\begin{ttbox}
val parse_ast_translation : (string * (ast list -> ast)) list
val parse_translation : (string * (term list -> term)) list
val print_translation : (string * (term list -> term)) list
val typed_print_translation :
(string * (bool -> typ -> term list -> term)) list
val print_ast_translation : (string * (ast list -> ast)) list
\end{ttbox}
If the @{text "(advanced)"} option is given, the corresponding
translation functions may depend on the current theory or proof
context. This allows to implement advanced syntax mechanisms, as
translations functions may refer to specific theory declarations or
auxiliary proof data.
See also \cite[\S8]{isabelle-ref} for more information on the
general concept of syntax transformations in Isabelle.
%FIXME proper antiquotations
\begin{ttbox}
val parse_ast_translation:
(string * (Proof.context -> ast list -> ast)) list
val parse_translation:
(string * (Proof.context -> term list -> term)) list
val print_translation:
(string * (Proof.context -> term list -> term)) list
val typed_print_translation:
(string * (Proof.context -> bool -> typ -> term list -> term)) list
val print_ast_translation:
(string * (Proof.context -> ast list -> ast)) list
\end{ttbox}
*}
end