src/Doc/Implementation/ML.thy

removed (now illegal) semicolons in generated theory files

(*:wrap=hard:maxLineLen=78:*)

theory "ML"
imports Base
begin

chapter \<open>Isabelle/ML\<close>

text \<open>Isabelle/ML is best understood as a certain culture based on
  Standard ML.  Thus it is not a new programming language, but a
  certain way to use SML at an advanced level within the Isabelle
  environment.  This covers a variety of aspects that are geared
  towards an efficient and robust platform for applications of formal
  logic with fully foundational proof construction --- according to
  the well-known \emph{LCF principle}.  There is specific
  infrastructure with library modules to address the needs of this
  difficult task.  For example, the raw parallel programming model of
  Poly/ML is presented as considerably more abstract concept of
  \emph{futures}, which is then used to augment the inference
  kernel, Isar theory and proof interpreter, and PIDE document management.

  The main aspects of Isabelle/ML are introduced below.  These
  first-hand explanations should help to understand how proper
  Isabelle/ML is to be read and written, and to get access to the
  wealth of experience that is expressed in the source text and its
  history of changes.\footnote{See
  @{url "http://isabelle.in.tum.de/repos/isabelle"} for the full
  Mercurial history.  There are symbolic tags to refer to official
  Isabelle releases, as opposed to arbitrary \emph{tip} versions that
  merely reflect snapshots that are never really up-to-date.}\<close>


section \<open>Style and orthography\<close>

text \<open>The sources of Isabelle/Isar are optimized for
  \emph{readability} and \emph{maintainability}.  The main purpose is
  to tell an informed reader what is really going on and how things
  really work.  This is a non-trivial aim, but it is supported by a
  certain style of writing Isabelle/ML that has emerged from long
  years of system development.\footnote{See also the interesting style
  guide for OCaml
  @{url "http://caml.inria.fr/resources/doc/guides/guidelines.en.html"}
  which shares many of our means and ends.}

  The main principle behind any coding style is \emph{consistency}.
  For a single author of a small program this merely means ``choose
  your style and stick to it''.  A complex project like Isabelle, with
  long years of development and different contributors, requires more
  standardization.  A coding style that is changed every few years or
  with every new contributor is no style at all, because consistency
  is quickly lost.  Global consistency is hard to achieve, though.
  Nonetheless, one should always strive at least for local consistency
  of modules and sub-systems, without deviating from some general
  principles how to write Isabelle/ML.

  In a sense, good coding style is like an \emph{orthography} for the
  sources: it helps to read quickly over the text and see through the
  main points, without getting distracted by accidental presentation
  of free-style code.
\<close>


subsection \<open>Header and sectioning\<close>

text \<open>Isabelle source files have a certain standardized header
  format (with precise spacing) that follows ancient traditions
  reaching back to the earliest versions of the system by Larry
  Paulson.  See @{file "~~/src/Pure/thm.ML"}, for example.

  The header includes at least @{verbatim Title} and @{verbatim
  Author} entries, followed by a prose description of the purpose of
  the module.  The latter can range from a single line to several
  paragraphs of explanations.

  The rest of the file is divided into sections, subsections,
  subsubsections, paragraphs etc.\ using a simple layout via ML
  comments as follows.

  \begin{verbatim}
  (*** section ***)

  (** subsection **)

  (* subsubsection *)

  (*short paragraph*)

  (*
    long paragraph,
    with more text
  *)
  \end{verbatim}

  As in regular typography, there is some extra space \emph{before}
  section headings that are adjacent to plain text, but not other headings
  as in the example above.

  \medskip The precise wording of the prose text given in these
  headings is chosen carefully to introduce the main theme of the
  subsequent formal ML text.
\<close>


subsection \<open>Naming conventions\<close>

text \<open>Since ML is the primary medium to express the meaning of the
  source text, naming of ML entities requires special care.

  \paragraph{Notation.}  A name consists of 1--3 \emph{words} (rarely
  4, but not more) that are separated by underscore.  There are three
  variants concerning upper or lower case letters, which are used for
  certain ML categories as follows:

  \medskip
  \begin{tabular}{lll}
  variant & example & ML categories \\\hline
  lower-case & @{ML_text foo_bar} & values, types, record fields \\
  capitalized & @{ML_text Foo_Bar} & datatype constructors, structures, functors \\
  upper-case & @{ML_text FOO_BAR} & special values, exception constructors, signatures \\
  \end{tabular}
  \medskip

  For historical reasons, many capitalized names omit underscores,
  e.g.\ old-style @{ML_text FooBar} instead of @{ML_text Foo_Bar}.
  Genuine mixed-case names are \emph{not} used, because clear division
  of words is essential for readability.\footnote{Camel-case was
  invented to workaround the lack of underscore in some early
  non-ASCII character sets.  Later it became habitual in some language
  communities that are now strong in numbers.}

  A single (capital) character does not count as ``word'' in this
  respect: some Isabelle/ML names are suffixed by extra markers like
  this: @{ML_text foo_barT}.

  Name variants are produced by adding 1--3 primes, e.g.\ @{ML_text
  foo'}, @{ML_text foo''}, or @{ML_text foo'''}, but not @{ML_text
  foo''''} or more.  Decimal digits scale better to larger numbers,
  e.g.\ @{ML_text foo0}, @{ML_text foo1}, @{ML_text foo42}.

  \paragraph{Scopes.}  Apart from very basic library modules, ML
  structures are not ``opened'', but names are referenced with
  explicit qualification, as in @{ML Syntax.string_of_term} for
  example.  When devising names for structures and their components it
  is important to aim at eye-catching compositions of both parts, because
  this is how they are seen in the sources and documentation.  For the
  same reasons, aliases of well-known library functions should be
  avoided.

  Local names of function abstraction or case/let bindings are
  typically shorter, sometimes using only rudiments of ``words'',
  while still avoiding cryptic shorthands.  An auxiliary function
  called @{ML_text helper}, @{ML_text aux}, or @{ML_text f} is
  considered bad style.

  Example:

  \begin{verbatim}
  (* RIGHT *)

  fun print_foo ctxt foo =
    let
      fun print t = ... Syntax.string_of_term ctxt t ...
    in ... end;


  (* RIGHT *)

  fun print_foo ctxt foo =
    let
      val string_of_term = Syntax.string_of_term ctxt;
      fun print t = ... string_of_term t ...
    in ... end;


  (* WRONG *)

  val string_of_term = Syntax.string_of_term;

  fun print_foo ctxt foo =
    let
      fun aux t = ... string_of_term ctxt t ...
    in ... end;
  \end{verbatim}


  \paragraph{Specific conventions.} Here are some specific name forms
  that occur frequently in the sources.

  \begin{itemize}

  \item A function that maps @{ML_text foo} to @{ML_text bar} is
  called @{ML_text foo_to_bar} or @{ML_text bar_of_foo} (never
  @{ML_text foo2bar}, nor @{ML_text bar_from_foo}, nor @{ML_text
  bar_for_foo}, nor @{ML_text bar4foo}).

  \item The name component @{ML_text legacy} means that the operation
  is about to be discontinued soon.

  \item The name component @{ML_text global} means that this works
  with the background theory instead of the regular local context
  (\secref{sec:context}), sometimes for historical reasons, sometimes
  due a genuine lack of locality of the concept involved, sometimes as
  a fall-back for the lack of a proper context in the application
  code.  Whenever there is a non-global variant available, the
  application should be migrated to use it with a proper local
  context.

  \item Variables of the main context types of the Isabelle/Isar
  framework (\secref{sec:context} and \chref{ch:local-theory}) have
  firm naming conventions as follows:

  \begin{itemize}

  \item theories are called @{ML_text thy}, rarely @{ML_text theory}
  (never @{ML_text thry})

  \item proof contexts are called @{ML_text ctxt}, rarely @{ML_text
  context} (never @{ML_text ctx})

  \item generic contexts are called @{ML_text context}

  \item local theories are called @{ML_text lthy}, except for local
  theories that are treated as proof context (which is a semantic
  super-type)

  \end{itemize}

  Variations with primed or decimal numbers are always possible, as
  well as semantic prefixes like @{ML_text foo_thy} or @{ML_text
  bar_ctxt}, but the base conventions above need to be preserved.
  This allows to emphasize their data flow via plain regular
  expressions in the text editor.

  \item The main logical entities (\secref{ch:logic}) have established
  naming convention as follows:

  \begin{itemize}

  \item sorts are called @{ML_text S}

  \item types are called @{ML_text T}, @{ML_text U}, or @{ML_text
  ty} (never @{ML_text t})

  \item terms are called @{ML_text t}, @{ML_text u}, or @{ML_text
  tm} (never @{ML_text trm})

  \item certified types are called @{ML_text cT}, rarely @{ML_text
  T}, with variants as for types

  \item certified terms are called @{ML_text ct}, rarely @{ML_text
  t}, with variants as for terms (never @{ML_text ctrm})

  \item theorems are called @{ML_text th}, or @{ML_text thm}

  \end{itemize}

  Proper semantic names override these conventions completely.  For
  example, the left-hand side of an equation (as a term) can be called
  @{ML_text lhs} (not @{ML_text lhs_tm}).  Or a term that is known
  to be a variable can be called @{ML_text v} or @{ML_text x}.

  \item Tactics (\secref{sec:tactics}) are sufficiently important to
  have specific naming conventions.  The name of a basic tactic
  definition always has a @{ML_text "_tac"} suffix, the subgoal index
  (if applicable) is always called @{ML_text i}, and the goal state
  (if made explicit) is usually called @{ML_text st} instead of the
  somewhat misleading @{ML_text thm}.  Any other arguments are given
  before the latter two, and the general context is given first.
  Example:

  \begin{verbatim}
  fun my_tac ctxt arg1 arg2 i st = ...
  \end{verbatim}

  Note that the goal state @{ML_text st} above is rarely made
  explicit, if tactic combinators (tacticals) are used as usual.

  A tactic that requires a proof context needs to make that explicit as seen
  in the @{verbatim ctxt} argument above. Do not refer to the background
  theory of @{verbatim st} -- it is not a proper context, but merely a formal
  certificate.

  \end{itemize}
\<close>


subsection \<open>General source layout\<close>

text \<open>
  The general Isabelle/ML source layout imitates regular type-setting
  conventions, augmented by the requirements for deeply nested expressions
  that are commonplace in functional programming.

  \paragraph{Line length} is limited to 80 characters according to ancient
  standards, but we allow as much as 100 characters (not
  more).\footnote{Readability requires to keep the beginning of a line
  in view while watching its end.  Modern wide-screen displays do not
  change the way how the human brain works.  Sources also need to be
  printable on plain paper with reasonable font-size.} The extra 20
  characters acknowledge the space requirements due to qualified
  library references in Isabelle/ML.

  \paragraph{White-space} is used to emphasize the structure of
  expressions, following mostly standard conventions for mathematical
  typesetting, as can be seen in plain {\TeX} or {\LaTeX}.  This
  defines positioning of spaces for parentheses, punctuation, and
  infixes as illustrated here:

  \begin{verbatim}
  val x = y + z * (a + b);
  val pair = (a, b);
  val record = {foo = 1, bar = 2};
  \end{verbatim}

  Lines are normally broken \emph{after} an infix operator or
  punctuation character.  For example:

  \begin{verbatim}
  val x =
    a +
    b +
    c;

  val tuple =
   (a,
    b,
    c);
  \end{verbatim}

  Some special infixes (e.g.\ @{ML_text "|>"}) work better at the
  start of the line, but punctuation is always at the end.

  Function application follows the tradition of @{text "\<lambda>"}-calculus,
  not informal mathematics.  For example: @{ML_text "f a b"} for a
  curried function, or @{ML_text "g (a, b)"} for a tupled function.
  Note that the space between @{ML_text g} and the pair @{ML_text
  "(a, b)"} follows the important principle of
  \emph{compositionality}: the layout of @{ML_text "g p"} does not
  change when @{ML_text "p"} is refined to the concrete pair
  @{ML_text "(a, b)"}.

  \paragraph{Indentation} uses plain spaces, never hard
  tabulators.\footnote{Tabulators were invented to move the carriage
  of a type-writer to certain predefined positions.  In software they
  could be used as a primitive run-length compression of consecutive
  spaces, but the precise result would depend on non-standardized
  text editor configuration.}

  Each level of nesting is indented by 2 spaces, sometimes 1, very
  rarely 4, never 8 or any other odd number.

  Indentation follows a simple logical format that only depends on the
  nesting depth, not the accidental length of the text that initiates
  a level of nesting.  Example:

  \begin{verbatim}
  (* RIGHT *)

  if b then
    expr1_part1
    expr1_part2
  else
    expr2_part1
    expr2_part2


  (* WRONG *)

  if b then expr1_part1
            expr1_part2
  else expr2_part1
       expr2_part2
  \end{verbatim}

  The second form has many problems: it assumes a fixed-width font
  when viewing the sources, it uses more space on the line and thus
  makes it hard to observe its strict length limit (working against
  \emph{readability}), it requires extra editing to adapt the layout
  to changes of the initial text (working against
  \emph{maintainability}) etc.

  \medskip For similar reasons, any kind of two-dimensional or tabular
  layouts, ASCII-art with lines or boxes of asterisks etc.\ should be
  avoided.

  \paragraph{Complex expressions} that consist of multi-clausal
  function definitions, @{ML_text handle}, @{ML_text case},
  @{ML_text let} (and combinations) require special attention.  The
  syntax of Standard ML is quite ambitious and admits a lot of
  variance that can distort the meaning of the text.

  Multiple clauses of @{ML_text fun}, @{ML_text fn}, @{ML_text handle},
  @{ML_text case} get extra indentation to indicate the nesting
  clearly.  Example:

  \begin{verbatim}
  (* RIGHT *)

  fun foo p1 =
        expr1
    | foo p2 =
        expr2


  (* WRONG *)

  fun foo p1 =
    expr1
    | foo p2 =
    expr2
  \end{verbatim}

  Body expressions consisting of @{ML_text case} or @{ML_text let}
  require care to maintain compositionality, to prevent loss of
  logical indentation where it is especially important to see the
  structure of the text.  Example:

  \begin{verbatim}
  (* RIGHT *)

  fun foo p1 =
        (case e of
          q1 => ...
        | q2 => ...)
    | foo p2 =
        let
          ...
        in
          ...
        end


  (* WRONG *)

  fun foo p1 = case e of
      q1 => ...
    | q2 => ...
    | foo p2 =
    let
      ...
    in
      ...
    end
  \end{verbatim}

  Extra parentheses around @{ML_text case} expressions are optional,
  but help to analyse the nesting based on character matching in the
  text editor.

  \medskip There are two main exceptions to the overall principle of
  compositionality in the layout of complex expressions.

  \begin{enumerate}

  \item @{ML_text "if"} expressions are iterated as if ML had multi-branch
  conditionals, e.g.

  \begin{verbatim}
  (* RIGHT *)

  if b1 then e1
  else if b2 then e2
  else e3
  \end{verbatim}

  \item @{ML_text fn} abstractions are often layed-out as if they
  would lack any structure by themselves.  This traditional form is
  motivated by the possibility to shift function arguments back and
  forth wrt.\ additional combinators.  Example:

  \begin{verbatim}
  (* RIGHT *)

  fun foo x y = fold (fn z =>
    expr)
  \end{verbatim}

  Here the visual appearance is that of three arguments @{ML_text x},
  @{ML_text y}, @{ML_text z} in a row.

  \end{enumerate}

  Such weakly structured layout should be use with great care.  Here
  are some counter-examples involving @{ML_text let} expressions:

  \begin{verbatim}
  (* WRONG *)

  fun foo x = let
      val y = ...
    in ... end


  (* WRONG *)

  fun foo x = let
    val y = ...
  in ... end


  (* WRONG *)

  fun foo x =
  let
    val y = ...
  in ... end


  (* WRONG *)

  fun foo x =
    let
      val y = ...
    in
      ... end
  \end{verbatim}

  \medskip In general the source layout is meant to emphasize the
  structure of complex language expressions, not to pretend that SML
  had a completely different syntax (say that of Haskell, Scala, Java).
\<close>


section \<open>ML embedded into Isabelle/Isar\<close>

text \<open>ML and Isar are intertwined via an open-ended bootstrap
  process that provides more and more programming facilities and
  logical content in an alternating manner.  Bootstrapping starts from
  the raw environment of existing implementations of Standard ML
  (mainly Poly/ML, but also SML/NJ).

  Isabelle/Pure marks the point where the raw ML toplevel is superseded by
  Isabelle/ML within the Isar theory and proof language, with a uniform
  context for arbitrary ML values (see also \secref{sec:context}). This formal
  environment holds ML compiler bindings, logical entities, and many other
  things.

  Object-logics like Isabelle/HOL are built within the Isabelle/ML/Isar
  environment by introducing suitable theories with associated ML modules,
  either inlined within @{verbatim ".thy"} files, or as separate @{verbatim
  ".ML"} files that are loading from some theory. Thus Isabelle/HOL is defined
  as a regular user-space application within the Isabelle framework. Further
  add-on tools can be implemented in ML within the Isar context in the same
  manner: ML is part of the standard repertoire of Isabelle, and there is no
  distinction between ``users'' and ``developers'' in this respect.
\<close>


subsection \<open>Isar ML commands\<close>

text \<open>
  The primary Isar source language provides facilities to ``open a window'' to
  the underlying ML compiler. Especially see the Isar commands @{command_ref
  "ML_file"} and @{command_ref "ML"}: both work the same way, but the source
  text is provided differently, via a file vs.\ inlined, respectively. Apart
  from embedding ML into the main theory definition like that, there are many
  more commands that refer to ML source, such as @{command_ref setup} or
  @{command_ref declaration}. Even more fine-grained embedding of ML into Isar
  is encountered in the proof method @{method_ref tactic}, which refines the
  pending goal state via a given expression of type @{ML_type tactic}.
\<close>

text %mlex \<open>The following artificial example demonstrates some ML
  toplevel declarations within the implicit Isar theory context.  This
  is regular functional programming without referring to logical
  entities yet.
\<close>

ML \<open>
  fun factorial 0 = 1
    | factorial n = n * factorial (n - 1)
\<close>

text \<open>Here the ML environment is already managed by Isabelle, i.e.\
  the @{ML factorial} function is not yet accessible in the preceding
  paragraph, nor in a different theory that is independent from the
  current one in the import hierarchy.

  Removing the above ML declaration from the source text will remove any trace
  of this definition, as expected. The Isabelle/ML toplevel environment is
  managed in a \emph{stateless} way: in contrast to the raw ML toplevel, there
  are no global side-effects involved here.\footnote{Such a stateless
  compilation environment is also a prerequisite for robust parallel
  compilation within independent nodes of the implicit theory development
  graph.}

  \medskip The next example shows how to embed ML into Isar proofs, using
  @{command_ref "ML_prf"} instead of @{command_ref "ML"}. As illustrated
  below, the effect on the ML environment is local to the whole proof body,
  but ignoring the block structure. \<close>

notepad
begin
  ML_prf %"ML" \<open>val a = 1\<close>
  {
    ML_prf %"ML" \<open>val b = a + 1\<close>
  } -- \<open>Isar block structure ignored by ML environment\<close>
  ML_prf %"ML" \<open>val c = b + 1\<close>
end

text \<open>By side-stepping the normal scoping rules for Isar proof
  blocks, embedded ML code can refer to the different contexts and
  manipulate corresponding entities, e.g.\ export a fact from a block
  context.

  \medskip Two further ML commands are useful in certain situations:
  @{command_ref ML_val} and @{command_ref ML_command} are \emph{diagnostic} in
  the sense that there is no effect on the underlying environment, and can
  thus be used anywhere. The examples below produce long strings of digits by
  invoking @{ML factorial}: @{command ML_val} takes care of printing the ML
  toplevel result, but @{command ML_command} is silent so we produce an
  explicit output message.
\<close>

ML_val \<open>factorial 100\<close>
ML_command \<open>writeln (string_of_int (factorial 100))\<close>

notepad
begin
  ML_val \<open>factorial 100\<close>
  ML_command \<open>writeln (string_of_int (factorial 100))\<close>
end


subsection \<open>Compile-time context\<close>

text \<open>Whenever the ML compiler is invoked within Isabelle/Isar, the
  formal context is passed as a thread-local reference variable.  Thus
  ML code may access the theory context during compilation, by reading
  or writing the (local) theory under construction.  Note that such
  direct access to the compile-time context is rare.  In practice it
  is typically done via some derived ML functions instead.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML ML_Context.the_generic_context: "unit -> Context.generic"} \\
  @{index_ML "Context.>>": "(Context.generic -> Context.generic) -> unit"} \\
  @{index_ML ML_Thms.bind_thms: "string * thm list -> unit"} \\
  @{index_ML ML_Thms.bind_thm: "string * thm -> unit"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML "ML_Context.the_generic_context ()"} refers to the theory
  context of the ML toplevel --- at compile time.  ML code needs to
  take care to refer to @{ML "ML_Context.the_generic_context ()"}
  correctly.  Recall that evaluation of a function body is delayed
  until actual run-time.

  \item @{ML "Context.>>"}~@{text f} applies context transformation
  @{text f} to the implicit context of the ML toplevel.

  \item @{ML ML_Thms.bind_thms}~@{text "(name, thms)"} stores a list of
  theorems produced in ML both in the (global) theory context and the
  ML toplevel, associating it with the provided name.

  \item @{ML ML_Thms.bind_thm} is similar to @{ML ML_Thms.bind_thms} but
  refers to a singleton fact.

  \end{description}

  It is important to note that the above functions are really
  restricted to the compile time, even though the ML compiler is
  invoked at run-time.  The majority of ML code either uses static
  antiquotations (\secref{sec:ML-antiq}) or refers to the theory or
  proof context at run-time, by explicit functional abstraction.
\<close>


subsection \<open>Antiquotations \label{sec:ML-antiq}\<close>

text \<open>A very important consequence of embedding ML into Isar is the
  concept of \emph{ML antiquotation}.  The standard token language of
  ML is augmented by special syntactic entities of the following form:

  @{rail \<open>
  @{syntax_def antiquote}: '@{' nameref args '}'
  \<close>}

  Here @{syntax nameref} and @{syntax args} are outer syntax categories, as
  defined in @{cite "isabelle-isar-ref"}.

  \medskip A regular antiquotation @{text "@{name args}"} processes
  its arguments by the usual means of the Isar source language, and
  produces corresponding ML source text, either as literal
  \emph{inline} text (e.g.\ @{text "@{term t}"}) or abstract
  \emph{value} (e.g. @{text "@{thm th}"}).  This pre-compilation
  scheme allows to refer to formal entities in a robust manner, with
  proper static scoping and with some degree of logical checking of
  small portions of the code.
\<close>


subsection \<open>Printing ML values\<close>

text \<open>The ML compiler knows about the structure of values according
  to their static type, and can print them in the manner of its
  toplevel, although the details are non-portable.  The
  antiquotations @{ML_antiquotation_def "make_string"} and
  @{ML_antiquotation_def "print"} provide a quasi-portable way to
  refer to this potential capability of the underlying ML system in
  generic Isabelle/ML sources.

  This is occasionally useful for diagnostic or demonstration
  purposes.  Note that production-quality tools require proper
  user-level error messages, avoiding raw ML values in the output.\<close>

text %mlantiq \<open>
  \begin{matharray}{rcl}
  @{ML_antiquotation_def "make_string"} & : & @{text ML_antiquotation} \\
  @{ML_antiquotation_def "print"} & : & @{text ML_antiquotation} \\
  \end{matharray}

  @{rail \<open>
  @@{ML_antiquotation make_string}
  ;
  @@{ML_antiquotation print} @{syntax name}?
  \<close>}

  \begin{description}

  \item @{text "@{make_string}"} inlines a function to print arbitrary values
  similar to the ML toplevel. The result is compiler dependent and may fall
  back on "?" in certain situations. The value of configuration option
  @{attribute_ref ML_print_depth} determines further details of output.

  \item @{text "@{print f}"} uses the ML function @{text "f: string ->
  unit"} to output the result of @{text "@{make_string}"} above,
  together with the source position of the antiquotation.  The default
  output function is @{ML writeln}.

  \end{description}
\<close>

text %mlex \<open>The following artificial examples show how to produce
  adhoc output of ML values for debugging purposes.\<close>

ML_val \<open>
  val x = 42;
  val y = true;

  writeln (@{make_string} {x = x, y = y});

  @{print} {x = x, y = y};
  @{print tracing} {x = x, y = y};
\<close>


section \<open>Canonical argument order \label{sec:canonical-argument-order}\<close>

text \<open>Standard ML is a language in the tradition of @{text
  "\<lambda>"}-calculus and \emph{higher-order functional programming},
  similar to OCaml, Haskell, or Isabelle/Pure and HOL as logical
  languages.  Getting acquainted with the native style of representing
  functions in that setting can save a lot of extra boiler-plate of
  redundant shuffling of arguments, auxiliary abstractions etc.

  Functions are usually \emph{curried}: the idea of turning arguments
  of type @{text "\<tau>\<^sub>i"} (for @{text "i \<in> {1, \<dots> n}"}) into a result of
  type @{text "\<tau>"} is represented by the iterated function space
  @{text "\<tau>\<^sub>1 \<rightarrow> \<dots> \<rightarrow> \<tau>\<^sub>n \<rightarrow> \<tau>"}.  This is isomorphic to the well-known
  encoding via tuples @{text "\<tau>\<^sub>1 \<times> \<dots> \<times> \<tau>\<^sub>n \<rightarrow> \<tau>"}, but the curried
  version fits more smoothly into the basic calculus.\footnote{The
  difference is even more significant in HOL, because the redundant
  tuple structure needs to be accommodated extraneous proof steps.}

  Currying gives some flexibility due to \emph{partial application}.  A
  function @{text "f: \<tau>\<^sub>1 \<rightarrow> \<tau>\<^sub>2 \<rightarrow> \<tau>"} can be applied to @{text "x: \<tau>\<^sub>1"}
  and the remaining @{text "(f x): \<tau>\<^sub>2 \<rightarrow> \<tau>"} passed to another function
  etc.  How well this works in practice depends on the order of
  arguments.  In the worst case, arguments are arranged erratically,
  and using a function in a certain situation always requires some
  glue code.  Thus we would get exponentially many opportunities to
  decorate the code with meaningless permutations of arguments.

  This can be avoided by \emph{canonical argument order}, which
  observes certain standard patterns and minimizes adhoc permutations
  in their application.  In Isabelle/ML, large portions of text can be
  written without auxiliary operations like @{text "swap: \<alpha> \<times> \<beta> \<rightarrow> \<beta> \<times>
  \<alpha>"} or @{text "C: (\<alpha> \<rightarrow> \<beta> \<rightarrow> \<gamma>) \<rightarrow> (\<beta> \<rightarrow> \<alpha> \<rightarrow> \<gamma>)"} (the latter is not
  present in the Isabelle/ML library).

  \medskip The main idea is that arguments that vary less are moved
  further to the left than those that vary more.  Two particularly
  important categories of functions are \emph{selectors} and
  \emph{updates}.

  The subsequent scheme is based on a hypothetical set-like container
  of type @{text "\<beta>"} that manages elements of type @{text "\<alpha>"}.  Both
  the names and types of the associated operations are canonical for
  Isabelle/ML.

  \begin{center}
  \begin{tabular}{ll}
  kind & canonical name and type \\\hline
  selector & @{text "member: \<beta> \<rightarrow> \<alpha> \<rightarrow> bool"} \\
  update & @{text "insert: \<alpha> \<rightarrow> \<beta> \<rightarrow> \<beta>"} \\
  \end{tabular}
  \end{center}

  Given a container @{text "B: \<beta>"}, the partially applied @{text
  "member B"} is a predicate over elements @{text "\<alpha> \<rightarrow> bool"}, and
  thus represents the intended denotation directly.  It is customary
  to pass the abstract predicate to further operations, not the
  concrete container.  The argument order makes it easy to use other
  combinators: @{text "forall (member B) list"} will check a list of
  elements for membership in @{text "B"} etc. Often the explicit
  @{text "list"} is pointless and can be contracted to @{text "forall
  (member B)"} to get directly a predicate again.

  In contrast, an update operation varies the container, so it moves
  to the right: @{text "insert a"} is a function @{text "\<beta> \<rightarrow> \<beta>"} to
  insert a value @{text "a"}.  These can be composed naturally as
  @{text "insert c \<circ> insert b \<circ> insert a"}.  The slightly awkward
  inversion of the composition order is due to conventional
  mathematical notation, which can be easily amended as explained
  below.
\<close>


subsection \<open>Forward application and composition\<close>

text \<open>Regular function application and infix notation works best for
  relatively deeply structured expressions, e.g.\ @{text "h (f x y + g
  z)"}.  The important special case of \emph{linear transformation}
  applies a cascade of functions @{text "f\<^sub>n (\<dots> (f\<^sub>1 x))"}.  This
  becomes hard to read and maintain if the functions are themselves
  given as complex expressions.  The notation can be significantly
  improved by introducing \emph{forward} versions of application and
  composition as follows:

  \medskip
  \begin{tabular}{lll}
  @{text "x |> f"} & @{text "\<equiv>"} & @{text "f x"} \\
  @{text "(f #> g) x"} & @{text "\<equiv>"} & @{text "x |> f |> g"} \\
  \end{tabular}
  \medskip

  This enables to write conveniently @{text "x |> f\<^sub>1 |> \<dots> |> f\<^sub>n"} or
  @{text "f\<^sub>1 #> \<dots> #> f\<^sub>n"} for its functional abstraction over @{text
  "x"}.

  \medskip There is an additional set of combinators to accommodate
  multiple results (via pairs) that are passed on as multiple
  arguments (via currying).

  \medskip
  \begin{tabular}{lll}
  @{text "(x, y) |-> f"} & @{text "\<equiv>"} & @{text "f x y"} \\
  @{text "(f #-> g) x"} & @{text "\<equiv>"} & @{text "x |> f |-> g"} \\
  \end{tabular}
  \medskip
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_op "|> ": "'a * ('a -> 'b) -> 'b"} \\
  @{index_ML_op "|-> ": "('c * 'a) * ('c -> 'a -> 'b) -> 'b"} \\
  @{index_ML_op "#> ": "('a -> 'b) * ('b -> 'c) -> 'a -> 'c"} \\
  @{index_ML_op "#-> ": "('a -> 'c * 'b) * ('c -> 'b -> 'd) -> 'a -> 'd"} \\
  \end{mldecls}
\<close>


subsection \<open>Canonical iteration\<close>

text \<open>As explained above, a function @{text "f: \<alpha> \<rightarrow> \<beta> \<rightarrow> \<beta>"} can be
  understood as update on a configuration of type @{text "\<beta>"},
  parameterized by an argument of type @{text "\<alpha>"}.  Given @{text "a: \<alpha>"}
  the partial application @{text "(f a): \<beta> \<rightarrow> \<beta>"} operates
  homogeneously on @{text "\<beta>"}.  This can be iterated naturally over a
  list of parameters @{text "[a\<^sub>1, \<dots>, a\<^sub>n]"} as @{text "f a\<^sub>1 #> \<dots> #> f a\<^sub>n"}.
  The latter expression is again a function @{text "\<beta> \<rightarrow> \<beta>"}.
  It can be applied to an initial configuration @{text "b: \<beta>"} to
  start the iteration over the given list of arguments: each @{text
  "a"} in @{text "a\<^sub>1, \<dots>, a\<^sub>n"} is applied consecutively by updating a
  cumulative configuration.

  The @{text fold} combinator in Isabelle/ML lifts a function @{text
  "f"} as above to its iterated version over a list of arguments.
  Lifting can be repeated, e.g.\ @{text "(fold \<circ> fold) f"} iterates
  over a list of lists as expected.

  The variant @{text "fold_rev"} works inside-out over the list of
  arguments, such that @{text "fold_rev f \<equiv> fold f \<circ> rev"} holds.

  The @{text "fold_map"} combinator essentially performs @{text
  "fold"} and @{text "map"} simultaneously: each application of @{text
  "f"} produces an updated configuration together with a side-result;
  the iteration collects all such side-results as a separate list.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML fold: "('a -> 'b -> 'b) -> 'a list -> 'b -> 'b"} \\
  @{index_ML fold_rev: "('a -> 'b -> 'b) -> 'a list -> 'b -> 'b"} \\
  @{index_ML fold_map: "('a -> 'b -> 'c * 'b) -> 'a list -> 'b -> 'c list * 'b"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML fold}~@{text f} lifts the parametrized update function
  @{text "f"} to a list of parameters.

  \item @{ML fold_rev}~@{text "f"} is similar to @{ML fold}~@{text
  "f"}, but works inside-out, as if the list would be reversed.

  \item @{ML fold_map}~@{text "f"} lifts the parametrized update
  function @{text "f"} (with side-result) to a list of parameters and
  cumulative side-results.

  \end{description}

  \begin{warn}
  The literature on functional programming provides a confusing multitude of
  combinators called @{text "foldl"}, @{text "foldr"} etc. SML97 provides its
  own variations as @{ML List.foldl} and @{ML List.foldr}, while the classic
  Isabelle library also has the historic @{ML Library.foldl} and @{ML
  Library.foldr}. To avoid unnecessary complication, all these historical
  versions should be ignored, and the canonical @{ML fold} (or @{ML fold_rev})
  used exclusively.
  \end{warn}
\<close>

text %mlex \<open>The following example shows how to fill a text buffer
  incrementally by adding strings, either individually or from a given
  list.
\<close>

ML_val \<open>
  val s =
    Buffer.empty
    |> Buffer.add "digits: "
    |> fold (Buffer.add o string_of_int) (0 upto 9)
    |> Buffer.content;

  @{assert} (s = "digits: 0123456789");
\<close>

text \<open>Note how @{ML "fold (Buffer.add o string_of_int)"} above saves
  an extra @{ML "map"} over the given list.  This kind of peephole
  optimization reduces both the code size and the tree structures in
  memory (``deforestation''), but it requires some practice to read
  and write fluently.

  \medskip The next example elaborates the idea of canonical
  iteration, demonstrating fast accumulation of tree content using a
  text buffer.
\<close>

ML \<open>
  datatype tree = Text of string | Elem of string * tree list;

  fun slow_content (Text txt) = txt
    | slow_content (Elem (name, ts)) =
        "<" ^ name ^ ">" ^
        implode (map slow_content ts) ^
        "</" ^ name ^ ">"

  fun add_content (Text txt) = Buffer.add txt
    | add_content (Elem (name, ts)) =
        Buffer.add ("<" ^ name ^ ">") #>
        fold add_content ts #>
        Buffer.add ("</" ^ name ^ ">");

  fun fast_content tree =
    Buffer.empty |> add_content tree |> Buffer.content;
\<close>

text \<open>The slowness of @{ML slow_content} is due to the @{ML implode} of
  the recursive results, because it copies previously produced strings
  again and again.

  The incremental @{ML add_content} avoids this by operating on a
  buffer that is passed through in a linear fashion.  Using @{ML_text
  "#>"} and contraction over the actual buffer argument saves some
  additional boiler-plate.  Of course, the two @{ML "Buffer.add"}
  invocations with concatenated strings could have been split into
  smaller parts, but this would have obfuscated the source without
  making a big difference in performance.  Here we have done some
  peephole-optimization for the sake of readability.

  Another benefit of @{ML add_content} is its ``open'' form as a
  function on buffers that can be continued in further linear
  transformations, folding etc.  Thus it is more compositional than
  the naive @{ML slow_content}.  As realistic example, compare the
  old-style @{ML "Term.maxidx_of_term: term -> int"} with the newer
  @{ML "Term.maxidx_term: term -> int -> int"} in Isabelle/Pure.

  Note that @{ML fast_content} above is only defined as example.  In
  many practical situations, it is customary to provide the
  incremental @{ML add_content} only and leave the initialization and
  termination to the concrete application to the user.
\<close>


section \<open>Message output channels \label{sec:message-channels}\<close>

text \<open>Isabelle provides output channels for different kinds of
  messages: regular output, high-volume tracing information, warnings,
  and errors.

  Depending on the user interface involved, these messages may appear
  in different text styles or colours.  The standard output for
  batch sessions prefixes each line of warnings by @{verbatim
  "###"} and errors by @{verbatim "***"}, but leaves anything else
  unchanged.  The message body may contain further markup and formatting,
  which is routinely used in the Prover IDE @{cite "isabelle-jedit"}.

  Messages are associated with the transaction context of the running
  Isar command.  This enables the front-end to manage commands and
  resulting messages together.  For example, after deleting a command
  from a given theory document version, the corresponding message
  output can be retracted from the display.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML writeln: "string -> unit"} \\
  @{index_ML tracing: "string -> unit"} \\
  @{index_ML warning: "string -> unit"} \\
  @{index_ML error: "string -> 'a"} % FIXME Output.error_message (!?) \\
  \end{mldecls}

  \begin{description}

  \item @{ML writeln}~@{text "text"} outputs @{text "text"} as regular
  message.  This is the primary message output operation of Isabelle
  and should be used by default.

  \item @{ML tracing}~@{text "text"} outputs @{text "text"} as special
  tracing message, indicating potential high-volume output to the
  front-end (hundreds or thousands of messages issued by a single
  command).  The idea is to allow the user-interface to downgrade the
  quality of message display to achieve higher throughput.

  Note that the user might have to take special actions to see tracing
  output, e.g.\ switch to a different output window.  So this channel
  should not be used for regular output.

  \item @{ML warning}~@{text "text"} outputs @{text "text"} as
  warning, which typically means some extra emphasis on the front-end
  side (color highlighting, icons, etc.).

  \item @{ML error}~@{text "text"} raises exception @{ML ERROR}~@{text
  "text"} and thus lets the Isar toplevel print @{text "text"} on the
  error channel, which typically means some extra emphasis on the
  front-end side (color highlighting, icons, etc.).

  This assumes that the exception is not handled before the command
  terminates.  Handling exception @{ML ERROR}~@{text "text"} is a
  perfectly legal alternative: it means that the error is absorbed
  without any message output.

  \begin{warn}
  The actual error channel is accessed via @{ML Output.error_message}, but
  this is normally not used directly in user code.
  \end{warn}

  \end{description}

  \begin{warn}
  Regular Isabelle/ML code should output messages exclusively by the
  official channels.  Using raw I/O on \emph{stdout} or \emph{stderr}
  instead (e.g.\ via @{ML TextIO.output}) is apt to cause problems in
  the presence of parallel and asynchronous processing of Isabelle
  theories.  Such raw output might be displayed by the front-end in
  some system console log, with a low chance that the user will ever
  see it.  Moreover, as a genuine side-effect on global process
  channels, there is no proper way to retract output when Isar command
  transactions are reset by the system.
  \end{warn}

  \begin{warn}
  The message channels should be used in a message-oriented manner.
  This means that multi-line output that logically belongs together is
  issued by a single invocation of @{ML writeln} etc.\ with the
  functional concatenation of all message constituents.
  \end{warn}
\<close>

text %mlex \<open>The following example demonstrates a multi-line
  warning.  Note that in some situations the user sees only the first
  line, so the most important point should be made first.
\<close>

ML_command \<open>
  warning (cat_lines
   ["Beware the Jabberwock, my son!",
    "The jaws that bite, the claws that catch!",
    "Beware the Jubjub Bird, and shun",
    "The frumious Bandersnatch!"]);
\<close>

text \<open>
  \medskip An alternative is to make a paragraph of freely-floating words as
  follows.
\<close>

ML_command \<open>
  warning (Pretty.string_of (Pretty.para
    "Beware the Jabberwock, my son! \
    \The jaws that bite, the claws that catch! \
    \Beware the Jubjub Bird, and shun \
    \The frumious Bandersnatch!"))
\<close>

text \<open>
  This has advantages with variable window / popup sizes, but might make it
  harder to search for message content systematically, e.g.\ by other tools or
  by humans expecting the ``verse'' of a formal message in a fixed layout.
\<close>


section \<open>Exceptions \label{sec:exceptions}\<close>

text \<open>The Standard ML semantics of strict functional evaluation
  together with exceptions is rather well defined, but some delicate
  points need to be observed to avoid that ML programs go wrong
  despite static type-checking.  Exceptions in Isabelle/ML are
  subsequently categorized as follows.

  \paragraph{Regular user errors.}  These are meant to provide
  informative feedback about malformed input etc.

  The \emph{error} function raises the corresponding @{ML ERROR}
  exception, with a plain text message as argument.  @{ML ERROR}
  exceptions can be handled internally, in order to be ignored, turned
  into other exceptions, or cascaded by appending messages.  If the
  corresponding Isabelle/Isar command terminates with an @{ML ERROR}
  exception state, the system will print the result on the error
  channel (see \secref{sec:message-channels}).

  It is considered bad style to refer to internal function names or
  values in ML source notation in user error messages.  Do not use
  @{text "@{make_string}"} nor @{text "@{here}"}!

  Grammatical correctness of error messages can be improved by
  \emph{omitting} final punctuation: messages are often concatenated
  or put into a larger context (e.g.\ augmented with source position).
  Note that punctuation after formal entities (types, terms, theorems) is
  particularly prone to user confusion.

  \paragraph{Program failures.}  There is a handful of standard
  exceptions that indicate general failure situations, or failures of
  core operations on logical entities (types, terms, theorems,
  theories, see \chref{ch:logic}).

  These exceptions indicate a genuine breakdown of the program, so the
  main purpose is to determine quickly what has happened where.
  Traditionally, the (short) exception message would include the name
  of an ML function, although this is no longer necessary, because the
  ML runtime system attaches detailed source position stemming from the
  corresponding @{ML_text raise} keyword.

  \medskip User modules can always introduce their own custom
  exceptions locally, e.g.\ to organize internal failures robustly
  without overlapping with existing exceptions.  Exceptions that are
  exposed in module signatures require extra care, though, and should
  \emph{not} be introduced by default.  Surprise by users of a module
  can be often minimized by using plain user errors instead.

  \paragraph{Interrupts.}  These indicate arbitrary system events:
  both the ML runtime system and the Isabelle/ML infrastructure signal
  various exceptional situations by raising the special
  @{ML Exn.Interrupt} exception in user code.

  This is the one and only way that physical events can intrude an Isabelle/ML
  program. Such an interrupt can mean out-of-memory, stack overflow, timeout,
  internal signaling of threads, or a POSIX process signal. An Isabelle/ML
  program that intercepts interrupts becomes dependent on physical effects of
  the environment. Even worse, exception handling patterns that are too
  general by accident, e.g.\ by misspelled exception constructors, will cover
  interrupts unintentionally and thus render the program semantics
  ill-defined.

  Note that the Interrupt exception dates back to the original SML90
  language definition.  It was excluded from the SML97 version to
  avoid its malign impact on ML program semantics, but without
  providing a viable alternative.  Isabelle/ML recovers physical
  interruptibility (which is an indispensable tool to implement
  managed evaluation of command transactions), but requires user code
  to be strictly transparent wrt.\ interrupts.

  \begin{warn}
  Isabelle/ML user code needs to terminate promptly on interruption,
  without guessing at its meaning to the system infrastructure.
  Temporary handling of interrupts for cleanup of global resources
  etc.\ needs to be followed immediately by re-raising of the original
  exception.
  \end{warn}
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML try: "('a -> 'b) -> 'a -> 'b option"} \\
  @{index_ML can: "('a -> 'b) -> 'a -> bool"} \\
  @{index_ML_exception ERROR: string} \\
  @{index_ML_exception Fail: string} \\
  @{index_ML Exn.is_interrupt: "exn -> bool"} \\
  @{index_ML reraise: "exn -> 'a"} \\
  @{index_ML Runtime.exn_trace: "(unit -> 'a) -> 'a"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML try}~@{text "f x"} makes the partiality of evaluating
  @{text "f x"} explicit via the option datatype.  Interrupts are
  \emph{not} handled here, i.e.\ this form serves as safe replacement
  for the \emph{unsafe} version @{ML_text "(SOME"}~@{text "f
  x"}~@{ML_text "handle _ => NONE)"} that is occasionally seen in
  books about SML97, but not in Isabelle/ML.

  \item @{ML can} is similar to @{ML try} with more abstract result.

  \item @{ML ERROR}~@{text "msg"} represents user errors; this
  exception is normally raised indirectly via the @{ML error} function
  (see \secref{sec:message-channels}).

  \item @{ML Fail}~@{text "msg"} represents general program failures.

  \item @{ML Exn.is_interrupt} identifies interrupts robustly, without
  mentioning concrete exception constructors in user code.  Handled
  interrupts need to be re-raised promptly!

  \item @{ML reraise}~@{text "exn"} raises exception @{text "exn"}
  while preserving its implicit position information (if possible,
  depending on the ML platform).

  \item @{ML Runtime.exn_trace}~@{ML_text "(fn () =>"}~@{text
  "e"}@{ML_text ")"} evaluates expression @{text "e"} while printing
  a full trace of its stack of nested exceptions (if possible,
  depending on the ML platform).

  Inserting @{ML Runtime.exn_trace} into ML code temporarily is
  useful for debugging, but not suitable for production code.

  \end{description}
\<close>

text %mlantiq \<open>
  \begin{matharray}{rcl}
  @{ML_antiquotation_def "assert"} & : & @{text ML_antiquotation} \\
  \end{matharray}

  \begin{description}

  \item @{text "@{assert}"} inlines a function
  @{ML_type "bool -> unit"} that raises @{ML Fail} if the argument is
  @{ML false}.  Due to inlining the source position of failed
  assertions is included in the error output.

  \end{description}
\<close>


section \<open>Strings of symbols \label{sec:symbols}\<close>

text \<open>A \emph{symbol} constitutes the smallest textual unit in
  Isabelle/ML --- raw ML characters are normally not encountered at
  all.  Isabelle strings consist of a sequence of symbols, represented
  as a packed string or an exploded list of strings.  Each symbol is
  in itself a small string, which has either one of the following
  forms:

  \begin{enumerate}

  \item a single ASCII character ``@{text "c"}'', for example
  ``@{verbatim a}'',

  \item a codepoint according to UTF-8 (non-ASCII byte sequence),

  \item a regular symbol ``@{verbatim \<open>\\<close>}@{verbatim "<"}@{text
  "ident"}@{verbatim ">"}'', for example ``@{verbatim "\<alpha>"}'',

  \item a control symbol ``@{verbatim \<open>\\<close>}@{verbatim "<^"}@{text
  "ident"}@{verbatim ">"}'', for example ``@{verbatim "\<^bold>"}'',

  \item a raw symbol ``@{verbatim \<open>\\<close>}@{verbatim "<^raw:"}@{text
  text}@{verbatim ">"}'' where @{text text} consists of printable characters
  excluding ``@{verbatim "."}'' and ``@{verbatim ">"}'', for example
  ``@{verbatim "\<^raw:$\sum_{i = 1}^n$>"}'',

  \item a numbered raw control symbol ``@{verbatim \<open>\\<close>}@{verbatim
  "<^raw"}@{text n}@{verbatim ">"}, where @{text n} consists of digits, for
  example ``@{verbatim "\<^raw42>"}''.

  \end{enumerate}

  The @{text "ident"} syntax for symbol names is @{text "letter
  (letter | digit)\<^sup>*"}, where @{text "letter = A..Za..z"} and @{text
  "digit = 0..9"}.  There are infinitely many regular symbols and
  control symbols, but a fixed collection of standard symbols is
  treated specifically.  For example, ``@{verbatim "\<alpha>"}'' is
  classified as a letter, which means it may occur within regular
  Isabelle identifiers.

  The character set underlying Isabelle symbols is 7-bit ASCII, but 8-bit
  character sequences are passed-through unchanged. Unicode/UCS data in UTF-8
  encoding is processed in a non-strict fashion, such that well-formed code
  sequences are recognized accordingly. Unicode provides its own collection of
  mathematical symbols, but within the core Isabelle/ML world there is no link
  to the standard collection of Isabelle regular symbols.

  \medskip Output of Isabelle symbols depends on the print mode. For example,
  the standard {\LaTeX} setup of the Isabelle document preparation system
  would present ``@{verbatim "\<alpha>"}'' as @{text "\<alpha>"}, and ``@{verbatim
  "\<^bold>\<alpha>"}'' as @{text "\<^bold>\<alpha>"}. On-screen rendering usually works by mapping a
  finite subset of Isabelle symbols to suitable Unicode characters.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "Symbol.symbol": string} \\
  @{index_ML Symbol.explode: "string -> Symbol.symbol list"} \\
  @{index_ML Symbol.is_letter: "Symbol.symbol -> bool"} \\
  @{index_ML Symbol.is_digit: "Symbol.symbol -> bool"} \\
  @{index_ML Symbol.is_quasi: "Symbol.symbol -> bool"} \\
  @{index_ML Symbol.is_blank: "Symbol.symbol -> bool"} \\
  \end{mldecls}
  \begin{mldecls}
  @{index_ML_type "Symbol.sym"} \\
  @{index_ML Symbol.decode: "Symbol.symbol -> Symbol.sym"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type "Symbol.symbol"} represents individual Isabelle
  symbols.

  \item @{ML "Symbol.explode"}~@{text "str"} produces a symbol list
  from the packed form.  This function supersedes @{ML
  "String.explode"} for virtually all purposes of manipulating text in
  Isabelle!\footnote{The runtime overhead for exploded strings is
  mainly that of the list structure: individual symbols that happen to
  be a singleton string do not require extra memory in Poly/ML.}

  \item @{ML "Symbol.is_letter"}, @{ML "Symbol.is_digit"}, @{ML
  "Symbol.is_quasi"}, @{ML "Symbol.is_blank"} classify standard
  symbols according to fixed syntactic conventions of Isabelle, cf.\
  @{cite "isabelle-isar-ref"}.

  \item Type @{ML_type "Symbol.sym"} is a concrete datatype that
  represents the different kinds of symbols explicitly, with
  constructors @{ML "Symbol.Char"}, @{ML "Symbol.UTF8"},
  @{ML "Symbol.Sym"}, @{ML "Symbol.Ctrl"}, @{ML "Symbol.Raw"},
  @{ML "Symbol.Malformed"}.

  \item @{ML "Symbol.decode"} converts the string representation of a
  symbol into the datatype version.

  \end{description}

  \paragraph{Historical note.} In the original SML90 standard the
  primitive ML type @{ML_type char} did not exists, and @{ML_text
  "explode: string -> string list"} produced a list of singleton
  strings like @{ML "raw_explode: string -> string list"} in
  Isabelle/ML today.  When SML97 came out, Isabelle did not adopt its
  somewhat anachronistic 8-bit or 16-bit characters, but the idea of
  exploding a string into a list of small strings was extended to
  ``symbols'' as explained above.  Thus Isabelle sources can refer to
  an infinite store of user-defined symbols, without having to worry
  about the multitude of Unicode encodings that have emerged over the
  years.\<close>


section \<open>Basic data types\<close>

text \<open>The basis library proposal of SML97 needs to be treated with
  caution.  Many of its operations simply do not fit with important
  Isabelle/ML conventions (like ``canonical argument order'', see
  \secref{sec:canonical-argument-order}), others cause problems with
  the parallel evaluation model of Isabelle/ML (such as @{ML
  TextIO.print} or @{ML OS.Process.system}).

  Subsequently we give a brief overview of important operations on
  basic ML data types.
\<close>


subsection \<open>Characters\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type char} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type char} is \emph{not} used.  The smallest textual
  unit in Isabelle is represented as a ``symbol'' (see
  \secref{sec:symbols}).

  \end{description}
\<close>


subsection \<open>Strings\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type string} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type string} represents immutable vectors of 8-bit
  characters.  There are operations in SML to convert back and forth
  to actual byte vectors, which are seldom used.

  This historically important raw text representation is used for
  Isabelle-specific purposes with the following implicit substructures
  packed into the string content:

  \begin{enumerate}

  \item sequence of Isabelle symbols (see also \secref{sec:symbols}),
  with @{ML Symbol.explode} as key operation;

  \item XML tree structure via YXML (see also @{cite "isabelle-system"}),
  with @{ML YXML.parse_body} as key operation.

  \end{enumerate}

  Note that Isabelle/ML string literals may refer Isabelle symbols like
  ``@{verbatim \<alpha>}'' natively, \emph{without} escaping the backslash. This is a
  consequence of Isabelle treating all source text as strings of symbols,
  instead of raw characters.

  \end{description}
\<close>

text %mlex \<open>The subsequent example illustrates the difference of
  physical addressing of bytes versus logical addressing of symbols in
  Isabelle strings.
\<close>

ML_val \<open>
  val s = "\<A>";

  @{assert} (length (Symbol.explode s) = 1);
  @{assert} (size s = 4);
\<close>

text \<open>Note that in Unicode renderings of the symbol @{text "\<A>"},
  variations of encodings like UTF-8 or UTF-16 pose delicate questions
  about the multi-byte representations of its codepoint, which is outside
  of the 16-bit address space of the original Unicode standard from
  the 1990-ies.  In Isabelle/ML it is just ``@{verbatim \<A>}''
  literally, using plain ASCII characters beyond any doubts.\<close>


subsection \<open>Integers\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type int} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type int} represents regular mathematical integers, which
  are \emph{unbounded}. Overflow is treated properly, but should never happen
  in practice.\footnote{The size limit for integer bit patterns in memory is
  64\,MB for 32-bit Poly/ML, and much higher for 64-bit systems.} This works
  uniformly for all supported ML platforms (Poly/ML and SML/NJ).

  Literal integers in ML text are forced to be of this one true
  integer type --- adhoc overloading of SML97 is disabled.

  Structure @{ML_structure IntInf} of SML97 is obsolete and superseded by
  @{ML_structure Int}.  Structure @{ML_structure Integer} in @{file
  "~~/src/Pure/General/integer.ML"} provides some additional
  operations.

  \end{description}
\<close>


subsection \<open>Time\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type Time.time} \\
  @{index_ML seconds: "real -> Time.time"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type Time.time} represents time abstractly according
  to the SML97 basis library definition.  This is adequate for
  internal ML operations, but awkward in concrete time specifications.

  \item @{ML seconds}~@{text "s"} turns the concrete scalar @{text
  "s"} (measured in seconds) into an abstract time value.  Floating
  point numbers are easy to use as configuration options in the
  context (see \secref{sec:config-options}) or system options that
  are maintained externally.

  \end{description}
\<close>


subsection \<open>Options\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML Option.map: "('a -> 'b) -> 'a option -> 'b option"} \\
  @{index_ML is_some: "'a option -> bool"} \\
  @{index_ML is_none: "'a option -> bool"} \\
  @{index_ML the: "'a option -> 'a"} \\
  @{index_ML these: "'a list option -> 'a list"} \\
  @{index_ML the_list: "'a option -> 'a list"} \\
  @{index_ML the_default: "'a -> 'a option -> 'a"} \\
  \end{mldecls}
\<close>

text \<open>Apart from @{ML Option.map} most other operations defined in
  structure @{ML_structure Option} are alien to Isabelle/ML and never
  used.  The operations shown above are defined in @{file
  "~~/src/Pure/General/basics.ML"}.\<close>


subsection \<open>Lists\<close>

text \<open>Lists are ubiquitous in ML as simple and light-weight
  ``collections'' for many everyday programming tasks.  Isabelle/ML
  provides important additions and improvements over operations that
  are predefined in the SML97 library.\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML cons: "'a -> 'a list -> 'a list"} \\
  @{index_ML member: "('b * 'a -> bool) -> 'a list -> 'b -> bool"} \\
  @{index_ML insert: "('a * 'a -> bool) -> 'a -> 'a list -> 'a list"} \\
  @{index_ML remove: "('b * 'a -> bool) -> 'b -> 'a list -> 'a list"} \\
  @{index_ML update: "('a * 'a -> bool) -> 'a -> 'a list -> 'a list"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML cons}~@{text "x xs"} evaluates to @{text "x :: xs"}.

  Tupled infix operators are a historical accident in Standard ML.
  The curried @{ML cons} amends this, but it should be only used when
  partial application is required.

  \item @{ML member}, @{ML insert}, @{ML remove}, @{ML update} treat
  lists as a set-like container that maintains the order of elements.
  See @{file "~~/src/Pure/library.ML"} for the full specifications
  (written in ML).  There are some further derived operations like
  @{ML union} or @{ML inter}.

  Note that @{ML insert} is conservative about elements that are
  already a @{ML member} of the list, while @{ML update} ensures that
  the latest entry is always put in front.  The latter discipline is
  often more appropriate in declarations of context data
  (\secref{sec:context-data}) that are issued by the user in Isar
  source: later declarations take precedence over earlier ones.

  \end{description}
\<close>

text %mlex \<open>Using canonical @{ML fold} together with @{ML cons} (or
  similar standard operations) alternates the orientation of data.
  The is quite natural and should not be altered forcible by inserting
  extra applications of @{ML rev}.  The alternative @{ML fold_rev} can
  be used in the few situations, where alternation should be
  prevented.
\<close>

ML_val \<open>
  val items = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];

  val list1 = fold cons items [];
  @{assert} (list1 = rev items);

  val list2 = fold_rev cons items [];
  @{assert} (list2 = items);
\<close>

text \<open>The subsequent example demonstrates how to \emph{merge} two
  lists in a natural way.\<close>

ML_val \<open>
  fun merge_lists eq (xs, ys) = fold_rev (insert eq) ys xs;
\<close>

text \<open>Here the first list is treated conservatively: only the new
  elements from the second list are inserted.  The inside-out order of
  insertion via @{ML fold_rev} attempts to preserve the order of
  elements in the result.

  This way of merging lists is typical for context data
  (\secref{sec:context-data}).  See also @{ML merge} as defined in
  @{file "~~/src/Pure/library.ML"}.
\<close>


subsection \<open>Association lists\<close>

text \<open>The operations for association lists interpret a concrete list
  of pairs as a finite function from keys to values.  Redundant
  representations with multiple occurrences of the same key are
  implicitly normalized: lookup and update only take the first
  occurrence into account.
\<close>

text \<open>
  \begin{mldecls}
  @{index_ML AList.lookup: "('a * 'b -> bool) -> ('b * 'c) list -> 'a -> 'c option"} \\
  @{index_ML AList.defined: "('a * 'b -> bool) -> ('b * 'c) list -> 'a -> bool"} \\
  @{index_ML AList.update: "('a * 'a -> bool) -> 'a * 'b -> ('a * 'b) list -> ('a * 'b) list"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML AList.lookup}, @{ML AList.defined}, @{ML AList.update}
  implement the main ``framework operations'' for mappings in
  Isabelle/ML, following standard conventions for their names and
  types.

  Note that a function called @{verbatim lookup} is obliged to express its
  partiality via an explicit option element.  There is no choice to
  raise an exception, without changing the name to something like
  @{text "the_element"} or @{text "get"}.

  The @{text "defined"} operation is essentially a contraction of @{ML
  is_some} and @{verbatim "lookup"}, but this is sufficiently frequent to
  justify its independent existence.  This also gives the
  implementation some opportunity for peep-hole optimization.

  \end{description}

  Association lists are adequate as simple implementation of finite mappings
  in many practical situations. A more advanced table structure is defined in
  @{file "~~/src/Pure/General/table.ML"}; that version scales easily to
  thousands or millions of elements.
\<close>


subsection \<open>Unsynchronized references\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "'a Unsynchronized.ref"} \\
  @{index_ML Unsynchronized.ref: "'a -> 'a Unsynchronized.ref"} \\
  @{index_ML "!": "'a Unsynchronized.ref -> 'a"} \\
  @{index_ML_op ":=": "'a Unsynchronized.ref * 'a -> unit"} \\
  \end{mldecls}
\<close>

text \<open>Due to ubiquitous parallelism in Isabelle/ML (see also
  \secref{sec:multi-threading}), the mutable reference cells of
  Standard ML are notorious for causing problems.  In a highly
  parallel system, both correctness \emph{and} performance are easily
  degraded when using mutable data.

  The unwieldy name of @{ML Unsynchronized.ref} for the constructor
  for references in Isabelle/ML emphasizes the inconveniences caused by
  mutability.  Existing operations @{ML "!"}  and @{ML_op ":="} are
  unchanged, but should be used with special precautions, say in a
  strictly local situation that is guaranteed to be restricted to
  sequential evaluation --- now and in the future.

  \begin{warn}
  Never @{ML_text "open Unsynchronized"}, not even in a local scope!
  Pretending that mutable state is no problem is a very bad idea.
  \end{warn}
\<close>


section \<open>Thread-safe programming \label{sec:multi-threading}\<close>

text \<open>Multi-threaded execution has become an everyday reality in
  Isabelle since Poly/ML 5.2.1 and Isabelle2008.  Isabelle/ML provides
  implicit and explicit parallelism by default, and there is no way
  for user-space tools to ``opt out''.  ML programs that are purely
  functional, output messages only via the official channels
  (\secref{sec:message-channels}), and do not intercept interrupts
  (\secref{sec:exceptions}) can participate in the multi-threaded
  environment immediately without further ado.

  More ambitious tools with more fine-grained interaction with the
  environment need to observe the principles explained below.
\<close>


subsection \<open>Multi-threading with shared memory\<close>

text \<open>Multiple threads help to organize advanced operations of the
  system, such as real-time conditions on command transactions,
  sub-components with explicit communication, general asynchronous
  interaction etc.  Moreover, parallel evaluation is a prerequisite to
  make adequate use of the CPU resources that are available on
  multi-core systems.\footnote{Multi-core computing does not mean that
  there are ``spare cycles'' to be wasted.  It means that the
  continued exponential speedup of CPU performance due to ``Moore's
  Law'' follows different rules: clock frequency has reached its peak
  around 2005, and applications need to be parallelized in order to
  avoid a perceived loss of performance.  See also
  @{cite "Sutter:2005"}.}

  Isabelle/Isar exploits the inherent structure of theories and proofs to
  support \emph{implicit parallelism} to a large extent. LCF-style theorem
  proving provides almost ideal conditions for that, see also
  @{cite "Wenzel:2009"}. This means, significant parts of theory and proof
  checking is parallelized by default. In Isabelle2013, a maximum
  speedup-factor of 3.5 on 4 cores and 6.5 on 8 cores can be expected
  @{cite "Wenzel:2013:ITP"}.

  \medskip ML threads lack the memory protection of separate
  processes, and operate concurrently on shared heap memory.  This has
  the advantage that results of independent computations are directly
  available to other threads: abstract values can be passed without
  copying or awkward serialization that is typically required for
  separate processes.

  To make shared-memory multi-threading work robustly and efficiently,
  some programming guidelines need to be observed.  While the ML
  system is responsible to maintain basic integrity of the
  representation of ML values in memory, the application programmer
  needs to ensure that multi-threaded execution does not break the
  intended semantics.

  \begin{warn}
  To participate in implicit parallelism, tools need to be
  thread-safe.  A single ill-behaved tool can affect the stability and
  performance of the whole system.
  \end{warn}

  Apart from observing the principles of thread-safeness passively, advanced
  tools may also exploit parallelism actively, e.g.\ by using library
  functions for parallel list operations (\secref{sec:parlist}).

  \begin{warn}
  Parallel computing resources are managed centrally by the
  Isabelle/ML infrastructure.  User programs should not fork their own
  ML threads to perform heavy computations.
  \end{warn}
\<close>


subsection \<open>Critical shared resources\<close>

text \<open>Thread-safeness is mainly concerned about concurrent
  read/write access to shared resources, which are outside the purely
  functional world of ML.  This covers the following in particular.

  \begin{itemize}

  \item Global references (or arrays), i.e.\ mutable memory cells that
  persist over several invocations of associated
  operations.\footnote{This is independent of the visibility of such
  mutable values in the toplevel scope.}

  \item Global state of the running Isabelle/ML process, i.e.\ raw I/O
  channels, environment variables, current working directory.

  \item Writable resources in the file-system that are shared among
  different threads or external processes.

  \end{itemize}

  Isabelle/ML provides various mechanisms to avoid critical shared
  resources in most situations.  As last resort there are some
  mechanisms for explicit synchronization.  The following guidelines
  help to make Isabelle/ML programs work smoothly in a concurrent
  environment.

  \begin{itemize}

  \item Avoid global references altogether.  Isabelle/Isar maintains a
  uniform context that incorporates arbitrary data declared by user
  programs (\secref{sec:context-data}).  This context is passed as
  plain value and user tools can get/map their own data in a purely
  functional manner.  Configuration options within the context
  (\secref{sec:config-options}) provide simple drop-in replacements
  for historic reference variables.

  \item Keep components with local state information re-entrant.
  Instead of poking initial values into (private) global references, a
  new state record can be created on each invocation, and passed
  through any auxiliary functions of the component.  The state record
  contain mutable references in special situations, without requiring any
  synchronization, as long as each invocation gets its own copy and the
  tool itself is single-threaded.

  \item Avoid raw output on @{text "stdout"} or @{text "stderr"}.  The
  Poly/ML library is thread-safe for each individual output operation,
  but the ordering of parallel invocations is arbitrary.  This means
  raw output will appear on some system console with unpredictable
  interleaving of atomic chunks.

  Note that this does not affect regular message output channels
  (\secref{sec:message-channels}).  An official message id is associated
  with the command transaction from where it originates, independently
  of other transactions.  This means each running Isar command has
  effectively its own set of message channels, and interleaving can
  only happen when commands use parallelism internally (and only at
  message boundaries).

  \item Treat environment variables and the current working directory
  of the running process as read-only.

  \item Restrict writing to the file-system to unique temporary files.
  Isabelle already provides a temporary directory that is unique for
  the running process, and there is a centralized source of unique
  serial numbers in Isabelle/ML.  Thus temporary files that are passed
  to to some external process will be always disjoint, and thus
  thread-safe.

  \end{itemize}
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML File.tmp_path: "Path.T -> Path.T"} \\
  @{index_ML serial_string: "unit -> string"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML File.tmp_path}~@{text "path"} relocates the base
  component of @{text "path"} into the unique temporary directory of
  the running Isabelle/ML process.

  \item @{ML serial_string}~@{text "()"} creates a new serial number
  that is unique over the runtime of the Isabelle/ML process.

  \end{description}
\<close>

text %mlex \<open>The following example shows how to create unique
  temporary file names.
\<close>

ML_val \<open>
  val tmp1 = File.tmp_path (Path.basic ("foo" ^ serial_string ()));
  val tmp2 = File.tmp_path (Path.basic ("foo" ^ serial_string ()));
  @{assert} (tmp1 <> tmp2);
\<close>


subsection \<open>Explicit synchronization\<close>

text \<open>Isabelle/ML provides explicit synchronization for mutable variables over
  immutable data, which may be updated atomically and exclusively. This
  addresses the rare situations where mutable shared resources are really
  required. Synchronization in Isabelle/ML is based on primitives of Poly/ML,
  which have been adapted to the specific assumptions of the concurrent
  Isabelle environment. User code should not break this abstraction, but stay
  within the confines of concurrent Isabelle/ML.

  A \emph{synchronized variable} is an explicit state component associated
  with mechanisms for locking and signaling. There are operations to await a
  condition, change the state, and signal the change to all other waiting
  threads. Synchronized access to the state variable is \emph{not} re-entrant:
  direct or indirect nesting within the same thread will cause a deadlock!\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "'a Synchronized.var"} \\
  @{index_ML Synchronized.var: "string -> 'a -> 'a Synchronized.var"} \\
  @{index_ML Synchronized.guarded_access: "'a Synchronized.var ->
  ('a -> ('b * 'a) option) -> 'b"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type "'a Synchronized.var"} represents synchronized
  variables with state of type @{ML_type 'a}.

  \item @{ML Synchronized.var}~@{text "name x"} creates a synchronized
  variable that is initialized with value @{text "x"}.  The @{text
  "name"} is used for tracing.

  \item @{ML Synchronized.guarded_access}~@{text "var f"} lets the
  function @{text "f"} operate within a critical section on the state
  @{text "x"} as follows: if @{text "f x"} produces @{ML NONE}, it
  continues to wait on the internal condition variable, expecting that
  some other thread will eventually change the content in a suitable
  manner; if @{text "f x"} produces @{ML SOME}~@{text "(y, x')"} it is
  satisfied and assigns the new state value @{text "x'"}, broadcasts a
  signal to all waiting threads on the associated condition variable,
  and returns the result @{text "y"}.

  \end{description}

  There are some further variants of the @{ML
  Synchronized.guarded_access} combinator, see @{file
  "~~/src/Pure/Concurrent/synchronized.ML"} for details.
\<close>

text %mlex \<open>The following example implements a counter that produces
  positive integers that are unique over the runtime of the Isabelle
  process:\<close>

ML_val \<open>
  local
    val counter = Synchronized.var "counter" 0;
  in
    fun next () =
      Synchronized.guarded_access counter
        (fn i =>
          let val j = i + 1
          in SOME (j, j) end);
  end;

  val a = next ();
  val b = next ();
  @{assert} (a <> b);
\<close>

text \<open>\medskip See @{file "~~/src/Pure/Concurrent/mailbox.ML"} how
  to implement a mailbox as synchronized variable over a purely
  functional list.\<close>


section \<open>Managed evaluation\<close>

text \<open>Execution of Standard ML follows the model of strict
  functional evaluation with optional exceptions.  Evaluation happens
  whenever some function is applied to (sufficiently many)
  arguments. The result is either an explicit value or an implicit
  exception.

  \emph{Managed evaluation} in Isabelle/ML organizes expressions and
  results to control certain physical side-conditions, to say more
  specifically when and how evaluation happens.  For example, the
  Isabelle/ML library supports lazy evaluation with memoing, parallel
  evaluation via futures, asynchronous evaluation via promises,
  evaluation with time limit etc.

  \medskip An \emph{unevaluated expression} is represented either as
  unit abstraction @{verbatim "fn () => a"} of type
  @{verbatim "unit -> 'a"} or as regular function
  @{verbatim "fn a => b"} of type @{verbatim "'a -> 'b"}.  Both forms
  occur routinely, and special care is required to tell them apart ---
  the static type-system of SML is only of limited help here.

  The first form is more intuitive: some combinator @{text "(unit ->
  'a) -> 'a"} applies the given function to @{text "()"} to initiate
  the postponed evaluation process.  The second form is more flexible:
  some combinator @{text "('a -> 'b) -> 'a -> 'b"} acts like a
  modified form of function application; several such combinators may
  be cascaded to modify a given function, before it is ultimately
  applied to some argument.

  \medskip \emph{Reified results} make the disjoint sum of regular
  values versions exceptional situations explicit as ML datatype:
  @{text "'a result = Res of 'a | Exn of exn"}.  This is typically
  used for administrative purposes, to store the overall outcome of an
  evaluation process.

  \emph{Parallel exceptions} aggregate reified results, such that
  multiple exceptions are digested as a collection in canonical form
  that identifies exceptions according to their original occurrence.
  This is particular important for parallel evaluation via futures
  \secref{sec:futures}, which are organized as acyclic graph of
  evaluations that depend on other evaluations: exceptions stemming
  from shared sub-graphs are exposed exactly once and in the order of
  their original occurrence (e.g.\ when printed at the toplevel).
  Interrupt counts as neutral element here: it is treated as minimal
  information about some canceled evaluation process, and is absorbed
  by the presence of regular program exceptions.\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "'a Exn.result"} \\
  @{index_ML Exn.capture: "('a -> 'b) -> 'a -> 'b Exn.result"} \\
  @{index_ML Exn.interruptible_capture: "('a -> 'b) -> 'a -> 'b Exn.result"} \\
  @{index_ML Exn.release: "'a Exn.result -> 'a"} \\
  @{index_ML Par_Exn.release_all: "'a Exn.result list -> 'a list"} \\
  @{index_ML Par_Exn.release_first: "'a Exn.result list -> 'a list"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type "'a Exn.result"} represents the disjoint sum of
  ML results explicitly, with constructor @{ML Exn.Res} for regular
  values and @{ML "Exn.Exn"} for exceptions.

  \item @{ML Exn.capture}~@{text "f x"} manages the evaluation of
  @{text "f x"} such that exceptions are made explicit as @{ML
  "Exn.Exn"}.  Note that this includes physical interrupts (see also
  \secref{sec:exceptions}), so the same precautions apply to user
  code: interrupts must not be absorbed accidentally!

  \item @{ML Exn.interruptible_capture} is similar to @{ML
  Exn.capture}, but interrupts are immediately re-raised as required
  for user code.

  \item @{ML Exn.release}~@{text "result"} releases the original
  runtime result, exposing its regular value or raising the reified
  exception.

  \item @{ML Par_Exn.release_all}~@{text "results"} combines results
  that were produced independently (e.g.\ by parallel evaluation).  If
  all results are regular values, that list is returned.  Otherwise,
  the collection of all exceptions is raised, wrapped-up as collective
  parallel exception.  Note that the latter prevents access to
  individual exceptions by conventional @{verbatim "handle"} of ML.

  \item @{ML Par_Exn.release_first} is similar to @{ML
  Par_Exn.release_all}, but only the first (meaningful) exception that has
  occurred in the original evaluation process is raised again, the others are
  ignored.  That single exception may get handled by conventional
  means in ML.

  \end{description}
\<close>


subsection \<open>Parallel skeletons \label{sec:parlist}\<close>

text \<open>
  Algorithmic skeletons are combinators that operate on lists in
  parallel, in the manner of well-known @{text map}, @{text exists},
  @{text forall} etc.  Management of futures (\secref{sec:futures})
  and their results as reified exceptions is wrapped up into simple
  programming interfaces that resemble the sequential versions.

  What remains is the application-specific problem to present
  expressions with suitable \emph{granularity}: each list element
  corresponds to one evaluation task.  If the granularity is too
  coarse, the available CPUs are not saturated.  If it is too
  fine-grained, CPU cycles are wasted due to the overhead of
  organizing parallel processing.  In the worst case, parallel
  performance will be less than the sequential counterpart!
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML Par_List.map: "('a -> 'b) -> 'a list -> 'b list"} \\
  @{index_ML Par_List.get_some: "('a -> 'b option) -> 'a list -> 'b option"} \\
  \end{mldecls}

  \begin{description}

  \item @{ML Par_List.map}~@{text "f [x\<^sub>1, \<dots>, x\<^sub>n]"} is like @{ML
  "map"}~@{text "f [x\<^sub>1, \<dots>, x\<^sub>n]"}, but the evaluation of @{text "f x\<^sub>i"}
  for @{text "i = 1, \<dots>, n"} is performed in parallel.

  An exception in any @{text "f x\<^sub>i"} cancels the overall evaluation
  process.  The final result is produced via @{ML
  Par_Exn.release_first} as explained above, which means the first
  program exception that happened to occur in the parallel evaluation
  is propagated, and all other failures are ignored.

  \item @{ML Par_List.get_some}~@{text "f [x\<^sub>1, \<dots>, x\<^sub>n]"} produces some
  @{text "f x\<^sub>i"} that is of the form @{text "SOME y\<^sub>i"}, if that
  exists, otherwise @{text "NONE"}.  Thus it is similar to @{ML
  Library.get_first}, but subject to a non-deterministic parallel
  choice process.  The first successful result cancels the overall
  evaluation process; other exceptions are propagated as for @{ML
  Par_List.map}.

  This generic parallel choice combinator is the basis for derived
  forms, such as @{ML Par_List.find_some}, @{ML Par_List.exists}, @{ML
  Par_List.forall}.

  \end{description}
\<close>

text %mlex \<open>Subsequently, the Ackermann function is evaluated in
  parallel for some ranges of arguments.\<close>

ML_val \<open>
  fun ackermann 0 n = n + 1
    | ackermann m 0 = ackermann (m - 1) 1
    | ackermann m n = ackermann (m - 1) (ackermann m (n - 1));

  Par_List.map (ackermann 2) (500 upto 1000);
  Par_List.map (ackermann 3) (5 upto 10);
\<close>


subsection \<open>Lazy evaluation\<close>

text \<open>
  Classic lazy evaluation works via the @{text lazy}~/ @{text force} pair of
  operations: @{text lazy} to wrap an unevaluated expression, and @{text
  force} to evaluate it once and store its result persistently. Later
  invocations of @{text force} retrieve the stored result without another
  evaluation. Isabelle/ML refines this idea to accommodate the aspects of
  multi-threading, synchronous program exceptions and asynchronous interrupts.

  The first thread that invokes @{text force} on an unfinished lazy value
  changes its state into a \emph{promise} of the eventual result and starts
  evaluating it. Any other threads that @{text force} the same lazy value in
  the meantime need to wait for it to finish, by producing a regular result or
  program exception. If the evaluation attempt is interrupted, this event is
  propagated to all waiting threads and the lazy value is reset to its
  original state.

  This means a lazy value is completely evaluated at most once, in a
  thread-safe manner. There might be multiple interrupted evaluation attempts,
  and multiple receivers of intermediate interrupt events. Interrupts are
  \emph{not} made persistent: later evaluation attempts start again from the
  original expression.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "'a lazy"} \\
  @{index_ML Lazy.lazy: "(unit -> 'a) -> 'a lazy"} \\
  @{index_ML Lazy.value: "'a -> 'a lazy"} \\
  @{index_ML Lazy.force: "'a lazy -> 'a"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type "'a lazy"} represents lazy values over type @{verbatim
  "'a"}.

  \item @{ML Lazy.lazy}~@{text "(fn () => e)"} wraps the unevaluated
  expression @{text e} as unfinished lazy value.

  \item @{ML Lazy.value}~@{text a} wraps the value @{text a} as finished lazy
  value.  When forced, it returns @{text a} without any further evaluation.

  There is very low overhead for this proforma wrapping of strict values as
  lazy values.

  \item @{ML Lazy.force}~@{text x} produces the result of the lazy value in a
  thread-safe manner as explained above. Thus it may cause the current thread
  to wait on a pending evaluation attempt by another thread.

  \end{description}
\<close>


subsection \<open>Futures \label{sec:futures}\<close>

text \<open>
  Futures help to organize parallel execution in a value-oriented manner, with
  @{text fork}~/ @{text join} as the main pair of operations, and some further
  variants; see also @{cite "Wenzel:2009" and "Wenzel:2013:ITP"}. Unlike lazy
  values, futures are evaluated strictly and spontaneously on separate worker
  threads. Futures may be canceled, which leads to interrupts on running
  evaluation attempts, and forces structurally related futures to fail for all
  time; already finished futures remain unchanged. Exceptions between related
  futures are propagated as well, and turned into parallel exceptions (see
  above).

  Technically, a future is a single-assignment variable together with a
  \emph{task} that serves administrative purposes, notably within the
  \emph{task queue} where new futures are registered for eventual evaluation
  and the worker threads retrieve their work.

  The pool of worker threads is limited, in correlation with the number of
  physical cores on the machine. Note that allocation of runtime resources may
  be distorted either if workers yield CPU time (e.g.\ via system sleep or
  wait operations), or if non-worker threads contend for significant runtime
  resources independently. There is a limited number of replacement worker
  threads that get activated in certain explicit wait conditions, after a
  timeout.

  \medskip Each future task belongs to some \emph{task group}, which
  represents the hierarchic structure of related tasks, together with the
  exception status a that point. By default, the task group of a newly created
  future is a new sub-group of the presently running one, but it is also
  possible to indicate different group layouts under program control.

  Cancellation of futures actually refers to the corresponding task group and
  all its sub-groups. Thus interrupts are propagated down the group hierarchy.
  Regular program exceptions are treated likewise: failure of the evaluation
  of some future task affects its own group and all sub-groups. Given a
  particular task group, its \emph{group status} cumulates all relevant
  exceptions according to its position within the group hierarchy. Interrupted
  tasks that lack regular result information, will pick up parallel exceptions
  from the cumulative group status.

  \medskip A \emph{passive future} or \emph{promise} is a future with slightly
  different evaluation policies: there is only a single-assignment variable
  and some expression to evaluate for the \emph{failed} case (e.g.\ to clean
  up resources when canceled). A regular result is produced by external means,
  using a separate \emph{fulfill} operation.

  Promises are managed in the same task queue, so regular futures may depend
  on them. This allows a form of reactive programming, where some promises are
  used as minimal elements (or guards) within the future dependency graph:
  when these promises are fulfilled the evaluation of subsequent futures
  starts spontaneously, according to their own inter-dependencies.
\<close>

text %mlref \<open>
  \begin{mldecls}
  @{index_ML_type "'a future"} \\
  @{index_ML Future.fork: "(unit -> 'a) -> 'a future"} \\
  @{index_ML Future.forks: "Future.params -> (unit -> 'a) list -> 'a future list"} \\
  @{index_ML Future.join: "'a future -> 'a"} \\
  @{index_ML Future.joins: "'a future list -> 'a list"} \\
  @{index_ML Future.value: "'a -> 'a future"} \\
  @{index_ML Future.map: "('a -> 'b) -> 'a future -> 'b future"} \\
  @{index_ML Future.cancel: "'a future -> unit"} \\
  @{index_ML Future.cancel_group: "Future.group -> unit"} \\[0.5ex]
  @{index_ML Future.promise: "(unit -> unit) -> 'a future"} \\
  @{index_ML Future.fulfill: "'a future -> 'a -> unit"} \\
  \end{mldecls}

  \begin{description}

  \item Type @{ML_type "'a future"} represents future values over type
  @{verbatim "'a"}.

  \item @{ML Future.fork}~@{text "(fn () => e)"} registers the unevaluated
  expression @{text e} as unfinished future value, to be evaluated eventually
  on the parallel worker-thread farm. This is a shorthand for @{ML
  Future.forks} below, with default parameters and a single expression.

  \item @{ML Future.forks}~@{text "params exprs"} is the general interface to
  fork several futures simultaneously. The @{text params} consist of the
  following fields:

  \begin{itemize}

  \item @{text "name : string"} (default @{ML "\"\""}) specifies a common name
  for the tasks of the forked futures, which serves diagnostic purposes.

  \item @{text "group : Future.group option"} (default @{ML NONE}) specifies
  an optional task group for the forked futures. @{ML NONE} means that a new
  sub-group of the current worker-thread task context is created. If this is
  not a worker thread, the group will be a new root in the group hierarchy.

  \item @{text "deps : Future.task list"} (default @{ML "[]"}) specifies
  dependencies on other future tasks, i.e.\ the adjacency relation in the
  global task queue. Dependencies on already finished tasks are ignored.

  \item @{text "pri : int"} (default @{ML 0}) specifies a priority within the
  task queue.

  Typically there is only little deviation from the default priority @{ML 0}.
  As a rule of thumb, @{ML "~1"} means ``low priority" and @{ML 1} means
  ``high priority''.

  Note that the task priority only affects the position in the queue, not the
  thread priority. When a worker thread picks up a task for processing, it
  runs with the normal thread priority to the end (or until canceled). Higher
  priority tasks that are queued later need to wait until this (or another)
  worker thread becomes free again.

  \item @{text "interrupts : bool"} (default @{ML true}) tells whether the
  worker thread that processes the corresponding task is initially put into
  interruptible state. This state may change again while running, by modifying
  the thread attributes.

  With interrupts disabled, a running future task cannot be canceled.  It is
  the responsibility of the programmer that this special state is retained
  only briefly.

  \end{itemize}

  \item @{ML Future.join}~@{text x} retrieves the value of an already finished
  future, which may lead to an exception, according to the result of its
  previous evaluation.

  For an unfinished future there are several cases depending on the role of
  the current thread and the status of the future. A non-worker thread waits
  passively until the future is eventually evaluated. A worker thread
  temporarily changes its task context and takes over the responsibility to
  evaluate the future expression on the spot. The latter is done in a
  thread-safe manner: other threads that intend to join the same future need
  to wait until the ongoing evaluation is finished.

  Note that excessive use of dynamic dependencies of futures by adhoc joining
  may lead to bad utilization of CPU cores, due to threads waiting on other
  threads to finish required futures. The future task farm has a limited
  amount of replacement threads that continue working on unrelated tasks after
  some timeout.

  Whenever possible, static dependencies of futures should be specified
  explicitly when forked (see @{text deps} above). Thus the evaluation can
  work from the bottom up, without join conflicts and wait states.

  \item @{ML Future.joins}~@{text xs} joins the given list of futures
  simultaneously, which is more efficient than @{ML "map Future.join"}~@{text
  xs}.

  Based on the dependency graph of tasks, the current thread takes over the
  responsibility to evaluate future expressions that are required for the main
  result, working from the bottom up. Waiting on future results that are
  presently evaluated on other threads only happens as last resort, when no
  other unfinished futures are left over.

  \item @{ML Future.value}~@{text a} wraps the value @{text a} as finished
  future value, bypassing the worker-thread farm. When joined, it returns
  @{text a} without any further evaluation.

  There is very low overhead for this proforma wrapping of strict values as
  futures.

  \item @{ML Future.map}~@{text "f x"} is a fast-path implementation of @{ML
  Future.fork}~@{text "(fn () => f ("}@{ML Future.join}~@{text "x))"}, which
  avoids the full overhead of the task queue and worker-thread farm as far as
  possible. The function @{text f} is supposed to be some trivial
  post-processing or projection of the future result.

  \item @{ML Future.cancel}~@{text "x"} cancels the task group of the given
  future, using @{ML Future.cancel_group} below.

  \item @{ML Future.cancel_group}~@{text "group"} cancels all tasks of the
  given task group for all time. Threads that are presently processing a task
  of the given group are interrupted: it may take some time until they are
  actually terminated. Tasks that are queued but not yet processed are
  dequeued and forced into interrupted state. Since the task group is itself
  invalidated, any further attempt to fork a future that belongs to it will
  yield a canceled result as well.

  \item @{ML Future.promise}~@{text abort} registers a passive future with the
  given @{text abort} operation: it is invoked when the future task group is
  canceled.

  \item @{ML Future.fulfill}~@{text "x a"} finishes the passive future @{text
  x} by the given value @{text a}. If the promise has already been canceled,
  the attempt to fulfill it causes an exception.

  \end{description}
\<close>

end