doc-src/Ref/substitution.tex

removed ML-Systems/smlnj-1.07.ML;

%% $Id$
\chapter{Substitution Tactics} \label{substitution}
\index{tactics!substitution|(}\index{equality|(}

Replacing equals by equals is a basic form of reasoning.  Isabelle supports
several kinds of equality reasoning.  {\bf Substitution} means replacing
free occurrences of~$t$ by~$u$ in a subgoal.  This is easily done, given an
equality $t=u$, provided the logic possesses the appropriate rule.  The
tactic {\tt hyp_subst_tac} performs substitution even in the assumptions.
But it works via object-level implication, and therefore must be specially
set up for each suitable object-logic.

Substitution should not be confused with object-level {\bf rewriting}.
Given equalities of the form $t=u$, rewriting replaces instances of~$t$ by
corresponding instances of~$u$, and continues until it reaches a normal
form.  Substitution handles `one-off' replacements by particular
equalities while rewriting handles general equations.
Chapter~\ref{simp-chap} discusses Isabelle's rewriting tactics.


\section{Substitution rules}
\index{substitution!rules}\index{*subst theorem}
Many logics include a substitution rule of the form
$$
\List{\Var{a}=\Var{b}; \Var{P}(\Var{a})} \Imp 
\Var{P}(\Var{b})  \eqno(subst)
$$
In backward proof, this may seem difficult to use: the conclusion
$\Var{P}(\Var{b})$ admits far too many unifiers.  But, if the theorem {\tt
eqth} asserts $t=u$, then \hbox{\tt eqth RS subst} is the derived rule
\[ \Var{P}(t) \Imp \Var{P}(u). \]
Provided $u$ is not an unknown, resolution with this rule is
well-behaved.\footnote{Unifying $\Var{P}(u)$ with a formula~$Q$
expresses~$Q$ in terms of its dependence upon~$u$.  There are still $2^k$
unifiers, if $Q$ has $k$ occurrences of~$u$, but Isabelle ensures that
the first unifier includes all the occurrences.}  To replace $u$ by~$t$ in
subgoal~$i$, use
\begin{ttbox} 
resolve_tac [eqth RS subst] \(i\){\it.}
\end{ttbox}
To replace $t$ by~$u$ in
subgoal~$i$, use
\begin{ttbox} 
resolve_tac [eqth RS ssubst] \(i\){\it,}
\end{ttbox}
where \tdxbold{ssubst} is the `swapped' substitution rule
$$
\List{\Var{a}=\Var{b}; \Var{P}(\Var{b})} \Imp 
\Var{P}(\Var{a}).  \eqno(ssubst)
$$
If \tdx{sym} denotes the symmetry rule
\(\Var{a}=\Var{b}\Imp\Var{b}=\Var{a}\), then {\tt ssubst} is just
\hbox{\tt sym RS subst}.  Many logics with equality include the rules {\tt
subst} and {\tt ssubst}, as well as {\tt refl}, {\tt sym} and {\tt trans}
(for the usual equality laws).  Examples include {\tt FOL} and {\tt HOL},
but not {\tt CTT} (Constructive Type Theory).

Elim-resolution is well-behaved with assumptions of the form $t=u$.
To replace $u$ by~$t$ or $t$ by~$u$ in subgoal~$i$, use
\begin{ttbox} 
eresolve_tac [subst] \(i\)    {\rm or}    eresolve_tac [ssubst] \(i\){\it.}
\end{ttbox}

Logics \HOL, {\FOL} and {\ZF} define the tactic \ttindexbold{stac} by
\begin{ttbox} 
fun stac eqth = CHANGED o rtac (eqth RS ssubst);
\end{ttbox}
Now {\tt stac~eqth} is like {\tt resolve_tac [eqth RS ssubst]} but with the
valuable property of failing if the substitution has no effect.


\section{Substitution in the hypotheses}
\index{assumptions!substitution in}
Substitution rules, like other rules of natural deduction, do not affect
the assumptions.  This can be inconvenient.  Consider proving the subgoal
\[ \List{c=a; c=b} \Imp a=b. \]
Calling {\tt eresolve_tac\ts[ssubst]\ts\(i\)} simply discards the
assumption~$c=a$, since $c$ does not occur in~$a=b$.  Of course, we can
work out a solution.  First apply {\tt eresolve_tac\ts[subst]\ts\(i\)},
replacing~$a$ by~$c$:
\[ \List{c=b} \Imp c=b \]
Equality reasoning can be difficult, but this trivial proof requires
nothing more sophisticated than substitution in the assumptions.
Object-logics that include the rule~$(subst)$ provide tactics for this
purpose:
\begin{ttbox} 
hyp_subst_tac       : int -> tactic
bound_hyp_subst_tac : int -> tactic
\end{ttbox}
\begin{ttdescription}
\item[\ttindexbold{hyp_subst_tac} {\it i}] 
  selects an equality assumption of the form $t=u$ or $u=t$, where $t$ is a
  free variable or parameter.  Deleting this assumption, it replaces $t$
  by~$u$ throughout subgoal~$i$, including the other assumptions.

\item[\ttindexbold{bound_hyp_subst_tac} {\it i}] 
  is similar but only substitutes for parameters (bound variables).
  Uses for this are discussed below.
\end{ttdescription}
The term being replaced must be a free variable or parameter.  Substitution
for constants is usually unhelpful, since they may appear in other
theorems.  For instance, the best way to use the assumption $0=1$ is to
contradict a theorem that states $0\not=1$, rather than to replace 0 by~1
in the subgoal!

Substitution for unknowns, such as $\Var{x}=0$, is a bad idea: we might prove
the subgoal more easily by instantiating~$\Var{x}$ to~1.
Substitution for free variables is unhelpful if they appear in the
premises of a rule being derived: the substitution affects object-level
assumptions, not meta-level assumptions.  For instance, replacing~$a$
by~$b$ could make the premise~$P(a)$ worthless.  To avoid this problem, use
{\tt bound_hyp_subst_tac}; alternatively, call \ttindex{cut_facts_tac} to
insert the atomic premises as object-level assumptions.


\section{Setting up {\tt hyp_subst_tac}} 
Many Isabelle object-logics, such as {\tt FOL}, {\tt HOL} and their
descendants, come with {\tt hyp_subst_tac} already defined.  A few others,
such as {\tt CTT}, do not support this tactic because they lack the
rule~$(subst)$.  When defining a new logic that includes a substitution
rule and implication, you must set up {\tt hyp_subst_tac} yourself.  It
is packaged as the \ML{} functor \ttindex{HypsubstFun}, which takes the
argument signature~{\tt HYPSUBST_DATA}:
\begin{ttbox} 
signature HYPSUBST_DATA =
  sig
  structure Simplifier : SIMPLIFIER
  val dest_eq          : term -> term*term
  val eq_reflection    : thm             (* a=b ==> a==b *)
  val imp_intr         : thm             (* (P ==> Q) ==> P-->Q *)
  val rev_mp           : thm             (* [| P;  P-->Q |] ==> Q *)
  val subst            : thm             (* [| a=b;  P(a) |] ==> P(b) *)
  val sym              : thm             (* a=b ==> b=a *)
  end;
\end{ttbox}
Thus, the functor requires the following items:
\begin{ttdescription}
\item[Simplifier] should be an instance of the simplifier (see
  Chapter~\ref{simp-chap}).

\item[\ttindexbold{dest_eq}] should return the pair~$(t,u)$ when
applied to the \ML{} term that represents~$t=u$.  For other terms, it
should raise exception~\xdx{Match}.

\item[\tdxbold{eq_reflection}] is the theorem discussed
  in~\S\ref{sec:setting-up-simp}. 

\item[\tdxbold{imp_intr}] should be the implies introduction
rule $(\Var{P}\Imp\Var{Q})\Imp \Var{P}\imp\Var{Q}$.

\item[\tdxbold{rev_mp}] should be the `reversed' implies elimination
rule $\List{\Var{P};  \;\Var{P}\imp\Var{Q}} \Imp \Var{Q}$.

\item[\tdxbold{subst}] should be the substitution rule
$\List{\Var{a}=\Var{b};\; \Var{P}(\Var{a})} \Imp \Var{P}(\Var{b})$.

\item[\tdxbold{sym}] should be the symmetry rule
$\Var{a}=\Var{b}\Imp\Var{b}=\Var{a}$.
\end{ttdescription}
%
The functor resides in file {\tt Provers/hypsubst.ML} in the Isabelle
distribution directory.  It is not sensitive to the precise formalization
of the object-logic.  It is not concerned with the names of the equality
and implication symbols, or the types of formula and terms.  Coding the
function {\tt dest_eq} requires knowledge of Isabelle's representation of
terms.  For {\tt FOL} it is defined by
\begin{ttbox} 
fun dest_eq (Const("Trueprop",_) $ (Const("op =",_)$t$u)) = (t,u)
\end{ttbox}
Here {\tt Trueprop} is the coercion from type~$o$ to type~$prop$, while
\hbox{\tt op =} is the internal name of the infix operator~{\tt=}.
Pattern-matching expresses the function concisely, using wildcards~({\tt_})
for the types.

The tactic {\tt hyp_subst_tac} works as follows.  First, it identifies a
suitable equality assumption, possibly re-orienting it using~{\tt sym}.  Then
it moves other assumptions into the conclusion of the goal, by repeatedly
caling {\tt eresolve_tac\ts[rev_mp]}.  Then, it uses {\tt asm_full_simp_tac}
or {\tt ssubst} to substitute throughout the subgoal.  (If the equality
involves unknowns then it must use {\tt ssubst}.)  Then, it deletes the
equality.  Finally, it moves the assumptions back to their original positions
by calling \hbox{\tt resolve_tac\ts[imp_intr]}.

\index{equality|)}\index{tactics!substitution|)}