%
\begin{isabellebody}%
\def\isabellecontext{Basics}%
%
\isadelimtheory
\isanewline
\isanewline
%
\endisadelimtheory
%
\isatagtheory
\isacommand{theory}\isamarkupfalse%
\ Basics\isanewline
\isakeyword{imports}\ Pure\isanewline
\isakeyword{begin}%
\endisatagtheory
{\isafoldtheory}%
%
\isadelimtheory
%
\endisadelimtheory
%
\isamarkupchapter{The Isabelle system environment%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
This manual describes Isabelle together with related tools and user
interfaces as seen from a system oriented view. See also the
\emph{Isabelle/Isar Reference Manual}~\cite{isabelle-isar-ref} for
the actual Isabelle input language and related concepts.
\medskip The Isabelle system environment provides the following
basic infrastructure to integrate tools smoothly.
\begin{enumerate}
\item The \emph{Isabelle settings} mechanism provides process
environment variables to all Isabelle executables (including tools
and user interfaces).
\item The \emph{raw Isabelle process} (\indexref{}{executable}{isabelle-process}\hyperlink{executable.isabelle-process}{\mbox{\isa{\isatt{isabelle{\isacharminus}process}}}}) runs logic sessions either interactively or in
batch mode. In particular, this view abstracts over the invocation
of the actual ML system to be used. Regular users rarely need to
care about the low-level process.
\item The \emph{Isabelle tools wrapper} (\indexref{}{executable}{isabelle}\hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}})
provides a generic startup environment Isabelle related utilities,
user interfaces etc. Such tools automatically benefit from the
settings mechanism.
\end{enumerate}%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsection{Isabelle settings \label{sec:settings}%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
The Isabelle system heavily depends on the \emph{settings
mechanism}\indexbold{settings}. Essentially, this is a statically
scoped collection of environment variables, such as \hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}}, \hyperlink{setting.ML-SYSTEM}{\mbox{\isa{\isatt{ML{\isacharunderscore}SYSTEM}}}}, \hyperlink{setting.ML-HOME}{\mbox{\isa{\isatt{ML{\isacharunderscore}HOME}}}}. These
variables are \emph{not} intended to be set directly from the shell,
though. Isabelle employs a somewhat more sophisticated scheme of
\emph{settings files} --- one for site-wide defaults, another for
additional user-specific modifications. With all configuration
variables in at most two places, this scheme is more maintainable
and user-friendly than global shell environment variables.
In particular, we avoid the typical situation where prospective
users of a software package are told to put several things into
their shell startup scripts, before being able to actually run the
program. Isabelle requires none such administrative chores of its
end-users --- the executables can be invoked straight away.
Occasionally, users would still want to put the \hyperlink{file.$ISABELLE-HOME/bin}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}bin}}}} directory into their shell's search path, but
this is not required.%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsubsection{Building the environment%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
Whenever any of the Isabelle executables is run, their settings
environment is put together as follows.
\begin{enumerate}
\item The special variable \indexdef{}{setting}{ISABELLE\_HOME}\hypertarget{setting.ISABELLE-HOME}{\hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}}} is
determined automatically from the location of the binary that has
been run.
You should not try to set \hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}} manually. Also
note that the Isabelle executables either have to be run from their
original location in the distribution directory, or via the
executable objects created by the \hyperlink{tool.install}{\mbox{\isa{\isatt{install}}}} utility. Symbolic
links are admissible, but a plain copy of the \hyperlink{file.$ISABELLE-HOME/bin}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}bin}}}} files will not work!
\item The file \hyperlink{file.$ISABELLE-HOME/etc/settings}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}etc{\isacharslash}settings}}}} ist run as a
\indexref{}{executable}{bash}\hyperlink{executable.bash}{\mbox{\isa{\isatt{bash}}}} shell script with the auto-export option for
variables enabled.
This file holds a rather long list of shell variable assigments,
thus providing the site-wide default settings. The Isabelle
distribution already contains a global settings file with sensible
defaults for most variables. When installing the system, only a few
of these may have to be adapted (probably \hyperlink{setting.ML-SYSTEM}{\mbox{\isa{\isatt{ML{\isacharunderscore}SYSTEM}}}}
etc.).
\item The file \verb|$ISABELLE_HOME_USER/etc/settings| (if it
exists) is run in the same way as the site default settings. Note
that the variable \hyperlink{setting.ISABELLE-HOME-USER}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME{\isacharunderscore}USER}}}} has already been set
before --- usually to \verb|~/.isabelle|.
Thus individual users may override the site-wide defaults. See also
file \hyperlink{file.$ISABELLE-HOME/etc/user-settings.sample}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}etc{\isacharslash}user{\isacharminus}settings{\isachardot}sample}}}} in the
distribution. Typically, a user settings file would contain only a
few lines, just the assigments that are really changed. One should
definitely \emph{not} start with a full copy the basic \hyperlink{file.$ISABELLE-HOME/etc/settings}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}etc{\isacharslash}settings}}}}. This could cause very annoying
maintainance problems later, when the Isabelle installation is
updated or changed otherwise.
\end{enumerate}
Since settings files are regular GNU \indexdef{}{executable}{bash}\hypertarget{executable.bash}{\hyperlink{executable.bash}{\mbox{\isa{\isatt{bash}}}}} scripts,
one may use complex shell commands, such as \verb|if| or
\verb|case| statements to set variables depending on the
system architecture or other environment variables. Such advanced
features should be added only with great care, though. In
particular, external environment references should be kept at a
minimum.
\medskip A few variables are somewhat special:
\begin{itemize}
\item \indexdef{}{setting}{ISABELLE\_PROCESS}\hypertarget{setting.ISABELLE-PROCESS}{\hyperlink{setting.ISABELLE-PROCESS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}PROCESS}}}}} and \indexdef{}{setting}{ISABELLE\_TOOL}\hypertarget{setting.ISABELLE-TOOL}{\hyperlink{setting.ISABELLE-TOOL}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}TOOL}}}}} are set
automatically to the absolute path names of the \hyperlink{executable.isabelle-process}{\mbox{\isa{\isatt{isabelle{\isacharminus}process}}}} and \hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}} executables,
respectively.
\item \indexref{}{setting}{ISABELLE\_OUTPUT}\hyperlink{setting.ISABELLE-OUTPUT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}OUTPUT}}}} will have the identifiers of
the Isabelle distribution (cf.\ \hyperlink{setting.ISABELLE-IDENTIFIER}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}IDENTIFIER}}}}) and
the ML system (cf.\ \hyperlink{setting.ML-IDENTIFIER}{\mbox{\isa{\isatt{ML{\isacharunderscore}IDENTIFIER}}}}) appended automatically
to its value.
\end{itemize}
\medskip Note that the settings environment may be inspected with
the Isabelle tool \hyperlink{tool.getenv}{\mbox{\isa{\isatt{getenv}}}}. This might help to figure out the
effect of complex settings scripts.%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsubsection{Common variables%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
This is a reference of common Isabelle settings variables. Note that
the list is somewhat open-ended. Third-party utilities or interfaces
may add their own selection. Variables that are special in some
sense are marked with \isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}.
\begin{description}
\item[\indexdef{}{setting}{ISABELLE\_HOME}\hypertarget{setting.ISABELLE-HOME}{\hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] is the
location of the top-level Isabelle distribution directory. This is
automatically determined from the Isabelle executable that has been
invoked. Do not attempt to set \hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}} yourself
from the shell!
\item[\indexdef{}{setting}{ISABELLE\_HOME\_USER}\hypertarget{setting.ISABELLE-HOME-USER}{\hyperlink{setting.ISABELLE-HOME-USER}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME{\isacharunderscore}USER}}}}}] is the user-specific
counterpart of \hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}}. The default value is
\verb|~/.isabelle|, under rare circumstances this may be
changed in the global setting file. Typically, the \hyperlink{setting.ISABELLE-HOME-USER}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME{\isacharunderscore}USER}}}} directory mimics \hyperlink{setting.ISABELLE-HOME}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}HOME}}}} to
some extend. In particular, site-wide defaults may be overridden by
a private \verb|$ISABELLE_HOME_USER/etc/settings|.
\item[\indexdef{}{setting}{ISABELLE\_PROCESS}\hypertarget{setting.ISABELLE-PROCESS}{\hyperlink{setting.ISABELLE-PROCESS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}PROCESS}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}, \hyperlink{setting.ISABELLE-TOOL}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}TOOL}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] are automatically set to the full path
names of the \hyperlink{executable.isabelle-process}{\mbox{\isa{\isatt{isabelle{\isacharminus}process}}}} and \hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}} executables, respectively. Thus other tools and scripts
need not assume that the \hyperlink{file.$ISABELLE-HOME/bin}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}bin}}}} directory is
on the current search path of the shell.
\item[\indexdef{}{setting}{ISABELLE\_IDENTIFIER}\hypertarget{setting.ISABELLE-IDENTIFIER}{\hyperlink{setting.ISABELLE-IDENTIFIER}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}IDENTIFIER}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] refers
to the name of this Isabelle distribution, e.g.\ ``\verb|Isabelle2008|''.
\item[\indexdef{}{setting}{ML\_SYSTEM}\hypertarget{setting.ML-SYSTEM}{\hyperlink{setting.ML-SYSTEM}{\mbox{\isa{\isatt{ML{\isacharunderscore}SYSTEM}}}}}, \indexdef{}{setting}{ML\_HOME}\hypertarget{setting.ML-HOME}{\hyperlink{setting.ML-HOME}{\mbox{\isa{\isatt{ML{\isacharunderscore}HOME}}}}},
\indexdef{}{setting}{ML\_OPTIONS}\hypertarget{setting.ML-OPTIONS}{\hyperlink{setting.ML-OPTIONS}{\mbox{\isa{\isatt{ML{\isacharunderscore}OPTIONS}}}}}, \indexdef{}{setting}{ML\_PLATFORM}\hypertarget{setting.ML-PLATFORM}{\hyperlink{setting.ML-PLATFORM}{\mbox{\isa{\isatt{ML{\isacharunderscore}PLATFORM}}}}}, \indexdef{}{setting}{ML\_IDENTIFIER}\hypertarget{setting.ML-IDENTIFIER}{\hyperlink{setting.ML-IDENTIFIER}{\mbox{\isa{\isatt{ML{\isacharunderscore}IDENTIFIER}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] specify the underlying ML system
to be used for Isabelle. There is only a fixed set of admissable
\hyperlink{setting.ML-SYSTEM}{\mbox{\isa{\isatt{ML{\isacharunderscore}SYSTEM}}}} names (see the \hyperlink{file.$ISABELLE-HOME/etc/settings}{\mbox{\isa{\isatt{{\isachardollar}ISABELLE{\isacharunderscore}HOME{\isacharslash}etc{\isacharslash}settings}}}} file of the distribution).
The actual compiler binary will be run from the directory \hyperlink{setting.ML-HOME}{\mbox{\isa{\isatt{ML{\isacharunderscore}HOME}}}}, with \hyperlink{setting.ML-OPTIONS}{\mbox{\isa{\isatt{ML{\isacharunderscore}OPTIONS}}}} as first arguments on the
command line. The optional \hyperlink{setting.ML-PLATFORM}{\mbox{\isa{\isatt{ML{\isacharunderscore}PLATFORM}}}} may specify the
binary format of ML heap images, which is useful for cross-platform
installations. The value of \hyperlink{setting.ML-IDENTIFIER}{\mbox{\isa{\isatt{ML{\isacharunderscore}IDENTIFIER}}}} is
automatically obtained by composing the values of \hyperlink{setting.ML-SYSTEM}{\mbox{\isa{\isatt{ML{\isacharunderscore}SYSTEM}}}}, \hyperlink{setting.ML-PLATFORM}{\mbox{\isa{\isatt{ML{\isacharunderscore}PLATFORM}}}} and the Isabelle version values.
\item[\indexdef{}{setting}{ISABELLE\_PATH}\hypertarget{setting.ISABELLE-PATH}{\hyperlink{setting.ISABELLE-PATH}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}PATH}}}}}] is a list of directories
(separated by colons) where Isabelle logic images may reside. When
looking up heaps files, the value of \hyperlink{setting.ML-IDENTIFIER}{\mbox{\isa{\isatt{ML{\isacharunderscore}IDENTIFIER}}}} is
appended to each component internally.
\item[\indexdef{}{setting}{ISABELLE\_OUTPUT}\hypertarget{setting.ISABELLE-OUTPUT}{\hyperlink{setting.ISABELLE-OUTPUT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}OUTPUT}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] is a
directory where output heap files should be stored by default. The
ML system and Isabelle version identifier is appended here, too.
\item[\indexdef{}{setting}{ISABELLE\_BROWSER\_INFO}\hypertarget{setting.ISABELLE-BROWSER-INFO}{\hyperlink{setting.ISABELLE-BROWSER-INFO}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}BROWSER{\isacharunderscore}INFO}}}}}] is the directory where
theory browser information (HTML text, graph data, and printable
documents) is stored (see also \secref{sec:info}). The default
value is \verb|$ISABELLE_HOME_USER/browser_info|.
\item[\indexdef{}{setting}{ISABELLE\_LOGIC}\hypertarget{setting.ISABELLE-LOGIC}{\hyperlink{setting.ISABELLE-LOGIC}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}LOGIC}}}}}] specifies the default logic to
load if none is given explicitely by the user. The default value is
\verb|HOL|.
\item[\indexdef{}{setting}{ISABELLE\_LINE\_EDITOR}\hypertarget{setting.ISABELLE-LINE-EDITOR}{\hyperlink{setting.ISABELLE-LINE-EDITOR}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}LINE{\isacharunderscore}EDITOR}}}}}] specifies the default
line editor for the \indexref{}{tool}{tty}\hyperlink{tool.tty}{\mbox{\isa{\isatt{tty}}}} interface.
\item[\indexdef{}{setting}{ISABELLE\_USEDIR\_OPTIONS}\hypertarget{setting.ISABELLE-USEDIR-OPTIONS}{\hyperlink{setting.ISABELLE-USEDIR-OPTIONS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}USEDIR{\isacharunderscore}OPTIONS}}}}}] is implicitly prefixed
to the command line of any \indexref{}{tool}{usedir}\hyperlink{tool.usedir}{\mbox{\isa{\isatt{usedir}}}} invocation. This
typically contains compilation options for object-logics --- \hyperlink{tool.usedir}{\mbox{\isa{\isatt{usedir}}}} is the basic utility for managing logic sessions (cf.\ the
\verb|IsaMakefile|s in the distribution).
\item[\indexdef{}{setting}{ISABELLE\_FILE\_IDENT}\hypertarget{setting.ISABELLE-FILE-IDENT}{\hyperlink{setting.ISABELLE-FILE-IDENT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}FILE{\isacharunderscore}IDENT}}}}}] specifies a shell command
for producing a source file identification, based on the actual
content instead of the full physical path and date stamp (which is
the default). A typical identification would produce a ``digest'' of
the text, using a cryptographic hash function like SHA-1, for
example.
\item[\indexdef{}{setting}{ISABELLE\_LATEX}\hypertarget{setting.ISABELLE-LATEX}{\hyperlink{setting.ISABELLE-LATEX}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}LATEX}}}}}, \indexdef{}{setting}{ISABELLE\_PDFLATEX}\hypertarget{setting.ISABELLE-PDFLATEX}{\hyperlink{setting.ISABELLE-PDFLATEX}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}PDFLATEX}}}}}, \indexdef{}{setting}{ISABELLE\_BIBTEX}\hypertarget{setting.ISABELLE-BIBTEX}{\hyperlink{setting.ISABELLE-BIBTEX}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}BIBTEX}}}}}, \indexdef{}{setting}{ISABELLE\_DVIPS}\hypertarget{setting.ISABELLE-DVIPS}{\hyperlink{setting.ISABELLE-DVIPS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}DVIPS}}}}}] refer to {\LaTeX} related tools for Isabelle
document preparation (see also \secref{sec:tool-latex}).
\item[\indexdef{}{setting}{ISABELLE\_TOOLS}\hypertarget{setting.ISABELLE-TOOLS}{\hyperlink{setting.ISABELLE-TOOLS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}TOOLS}}}}}] is a colon separated list of
directories that are scanned by \hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}} for external
utility programs (see also \secref{sec:isabelle-tool}).
\item[\indexdef{}{setting}{ISABELLE\_DOCS}\hypertarget{setting.ISABELLE-DOCS}{\hyperlink{setting.ISABELLE-DOCS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}DOCS}}}}}] is a colon separated list of
directories with documentation files.
\item[\indexdef{}{setting}{ISABELLE\_DOC\_FORMAT}\hypertarget{setting.ISABELLE-DOC-FORMAT}{\hyperlink{setting.ISABELLE-DOC-FORMAT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}DOC{\isacharunderscore}FORMAT}}}}}] specifies the preferred
document format, typically \verb|dvi| or \verb|pdf|.
\item[\indexdef{}{setting}{DVI\_VIEWER}\hypertarget{setting.DVI-VIEWER}{\hyperlink{setting.DVI-VIEWER}{\mbox{\isa{\isatt{DVI{\isacharunderscore}VIEWER}}}}}] specifies the command to be used
for displaying \verb|dvi| files.
\item[\indexdef{}{setting}{PDF\_VIEWER}\hypertarget{setting.PDF-VIEWER}{\hyperlink{setting.PDF-VIEWER}{\mbox{\isa{\isatt{PDF{\isacharunderscore}VIEWER}}}}}] specifies the command to be used
for displaying \verb|pdf| files.
\item[\indexdef{}{setting}{PRINT\_COMMAND}\hypertarget{setting.PRINT-COMMAND}{\hyperlink{setting.PRINT-COMMAND}{\mbox{\isa{\isatt{PRINT{\isacharunderscore}COMMAND}}}}}] specifies the standard printer
spool command, which is expected to accept \verb|ps| files.
\item[\indexdef{}{setting}{ISABELLE\_TMP\_PREFIX}\hypertarget{setting.ISABELLE-TMP-PREFIX}{\hyperlink{setting.ISABELLE-TMP-PREFIX}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}TMP{\isacharunderscore}PREFIX}}}}}\isa{{\isachardoublequote}\isactrlsup {\isacharasterisk}{\isachardoublequote}}] is the
prefix from which any running \hyperlink{executable.isabelle-process}{\mbox{\isa{\isatt{isabelle{\isacharminus}process}}}}
derives an individual directory for temporary files. The default is
somewhere in \verb|/tmp|.
\end{description}%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsection{The raw Isabelle process%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
The \indexdef{}{executable}{isabelle-process}\hypertarget{executable.isabelle-process}{\hyperlink{executable.isabelle-process}{\mbox{\isa{\isatt{isabelle{\isacharminus}process}}}}} executable runs bare-bones
Isabelle logic sessions --- either interactively or in batch mode.
It provides an abstraction over the underlying ML system, and over
the actual heap file locations. Its usage is:
\begin{ttbox}
Usage: isabelle-process [OPTIONS] [INPUT] [OUTPUT]
Options are:
-C tell ML system to copy output image
-I startup Isar interaction mode
-P startup Proof General interaction mode
-S secure mode -- disallow critical operations
-W OUTPUT startup process wrapper, with messages going to OUTPUT stream
-X startup PGIP interaction mode
-c tell ML system to compress output image
-e MLTEXT pass MLTEXT to the ML session
-f pass 'Session.finish();' to the ML session
-m MODE add print mode for output
-q non-interactive session
-r open heap file read-only
-u pass 'use"ROOT.ML";' to the ML session
-w reset write permissions on OUTPUT
INPUT (default "\$ISABELLE_LOGIC") and OUTPUT specify in/out heaps.
These are either names to be searched in the Isabelle path, or
actual file names (containing at least one /).
If INPUT is "RAW_ML_SYSTEM", just start the bare bones ML system.
\end{ttbox}
Input files without path specifications are looked up in the
\hyperlink{setting.ISABELLE-PATH}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}PATH}}}} setting, which may consist of multiple
components separated by colons --- these are tried in the given
order with the value of \hyperlink{setting.ML-IDENTIFIER}{\mbox{\isa{\isatt{ML{\isacharunderscore}IDENTIFIER}}}} appended
internally. In a similar way, base names are relative to the
directory specified by \hyperlink{setting.ISABELLE-OUTPUT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}OUTPUT}}}}. In any case,
actual file locations may also be given by including at least one
slash (\verb|/|) in the name (hint: use \verb|./| to
refer to the current directory).%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsubsubsection{Options%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
If the input heap file does not have write permission bits set, or
the \verb|-r| option is given explicitely, then the session
started will be read-only. That is, the ML world cannot be
committed back into the image file. Otherwise, a writable session
enables commits into either the input file, or into another output
heap file (if that is given as the second argument on the command
line).
The read-write state of sessions is determined at startup only, it
cannot be changed intermediately. Also note that heap images may
require considerable amounts of disk space (approximately
50--200~MB). Users are responsible for themselves to dispose their
heap files when they are no longer needed.
\medskip The \verb|-w| option makes the output heap file
read-only after terminating. Thus subsequent invocations cause the
logic image to be read-only automatically.
\medskip The \verb|-c| option tells the underlying ML system
to compress the output heap (fully transparently). On Poly/ML for
example, the image is garbage collected and all stored values are
maximally shared, resulting in up to \isa{{\isachardoublequote}{\isadigit{5}}{\isadigit{0}}{\isacharpercent}{\isachardoublequote}} less disk space
consumption.
\medskip The \verb|-C| option tells the ML system to produce
a completely self-contained output image, probably including a copy
of the ML runtime system itself.
\medskip Using the \verb|-e| option, arbitrary ML code may be
passed to the Isabelle session from the command line. Multiple
\verb|-e|'s are evaluated in the given order. Strange things
may happen when errorneous ML code is provided. Also make sure that
the ML commands are terminated properly by semicolon.
\medskip The \verb|-u| option is a shortcut for \verb|-e| passing ``\verb|use "ROOT.ML";|'' to the ML session.
The \verb|-f| option passes ``\verb|Session.finish();|'', which is intended mainly for administrative
purposes.
\medskip The \verb|-m| option adds identifiers of print modes
to be made active for this session. Typically, this is used by some
user interface, e.g.\ to enable output of proper mathematical
symbols.
\medskip Isabelle normally enters an interactive top-level loop
(after processing the \verb|-e| texts). The \verb|-q|
option inhibits interaction, thus providing a pure batch mode
facility.
\medskip The \verb|-I| option makes Isabelle enter Isar
interaction mode on startup, instead of the primitive ML top-level.
The \verb|-P| option configures the top-level loop for
interaction with the Proof General user interface, and the
\verb|-X| option enables XML-based PGIP communication. The
\verb|-W| option makes Isabelle enter a special process
wrapper for interaction via an external program; the protocol is a
stripped-down version of Proof General the interaction mode, see
also \hyperlink{file.~~/src/Pure/System/isabelle-process.ML}{\mbox{\isa{\isatt{{\isachartilde}{\isachartilde}{\isacharslash}src{\isacharslash}Pure{\isacharslash}System{\isacharslash}isabelle{\isacharunderscore}process{\isachardot}ML}}}} and \hyperlink{file.~~/src/Pure/System/isabelle-process.scala}{\mbox{\isa{\isatt{{\isachartilde}{\isachartilde}{\isacharslash}src{\isacharslash}Pure{\isacharslash}System{\isacharslash}isabelle{\isacharunderscore}process{\isachardot}scala}}}}.
\medskip The \verb|-S| option makes the Isabelle process more
secure by disabling some critical operations, notably runtime
compilation and evaluation of ML source code.%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsubsubsection{Examples%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
Run an interactive session of the default object-logic (as specified
by the \hyperlink{setting.ISABELLE-LOGIC}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}LOGIC}}}} setting) like this:
\begin{ttbox}
isabelle-process
\end{ttbox}
Usually \hyperlink{setting.ISABELLE-LOGIC}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}LOGIC}}}} refers to one of the standard
logic images, which are read-only by default. A writable session
--- based on \verb|FOL|, but output to \verb|Foo| (in the
directory specified by the \hyperlink{setting.ISABELLE-OUTPUT}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}OUTPUT}}}} setting) ---
may be invoked as follows:
\begin{ttbox}
isabelle-process FOL Foo
\end{ttbox}
Ending this session normally (e.g.\ by typing control-D) dumps the
whole ML system state into \verb|Foo|. Be prepared for several
tens of megabytes.
The \verb|Foo| session may be continued later (still in
writable state) by:
\begin{ttbox}
isabelle-process Foo
\end{ttbox}
A read-only \verb|Foo| session may be started by:
\begin{ttbox}
isabelle-process -r Foo
\end{ttbox}
\medskip Note that manual session management like this does
\emph{not} provide proper setup for theory presentation. This would
require the \hyperlink{tool.usedir}{\mbox{\isa{\isatt{usedir}}}} utility.
\bigskip The next example demonstrates batch execution of Isabelle.
We retrieve the \verb|FOL| theory value from the theory loader
within ML:
\begin{ttbox}
isabelle-process -e 'theory "FOL";' -q -r FOL
\end{ttbox}
Note that the output text will be interspersed with additional junk
messages by the ML runtime environment. The \verb|-W| option
allows to communicate with the Isabelle process via an external
program in a more robust fashion.%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsection{The Isabelle tools wrapper \label{sec:isabelle-tool}%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
All Isabelle related tools and interfaces are called via a common
wrapper --- \hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}}:
\begin{ttbox}
Usage: isabelle TOOL [ARGS ...]
Start Isabelle tool NAME with ARGS; pass "-?" for tool specific help.
Available tools are:
browser - Isabelle graph browser
\dots
\end{ttbox}
In principle, Isabelle tools are ordinary executable scripts that
are run within the Isabelle settings environment, see
\secref{sec:settings}. The set of available tools is collected by
\hyperlink{executable.isabelle}{\mbox{\isa{\isatt{isabelle}}}} from the directories listed in the \hyperlink{setting.ISABELLE-TOOLS}{\mbox{\isa{\isatt{ISABELLE{\isacharunderscore}TOOLS}}}} setting. Do not try to call the scripts directly
from the shell. Neither should you add the tool directories to your
shell's search path!%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isamarkupsubsubsection{Examples%
}
\isamarkuptrue%
%
\begin{isamarkuptext}%
Show the list of available documentation of the current Isabelle
installation like this:
\begin{ttbox}
isabelle doc
\end{ttbox}
View a certain document as follows:
\begin{ttbox}
isabelle doc isar-ref
\end{ttbox}
Create an Isabelle session derived from HOL (see also
\secref{sec:tool-mkdir} and \secref{sec:tool-make}):
\begin{ttbox}
isabelle mkdir HOL Test && isabelle make
\end{ttbox}
Note that \verb|isabelle mkdir| is usually only invoked once;
existing sessions (including document output etc.) are then updated
by \verb|isabelle make| alone.%
\end{isamarkuptext}%
\isamarkuptrue%
%
\isadelimtheory
%
\endisadelimtheory
%
\isatagtheory
\isacommand{end}\isamarkupfalse%
%
\endisatagtheory
{\isafoldtheory}%
%
\isadelimtheory
%
\endisadelimtheory
\end{isabellebody}%
%%% Local Variables:
%%% mode: latex
%%% TeX-master: "root"
%%% End: