(* $Id$ *)
theory ML_Tactic
imports Main
begin
chapter {* ML tactic expressions *}
text {*
Isar Proof methods closely resemble traditional tactics, when used
in unstructured sequences of @{command "apply"} commands.
Isabelle/Isar provides emulations for all major ML tactics of
classic Isabelle --- mostly for the sake of easy porting of existing
developments, as actual Isar proof texts would demand much less
diversity of proof methods.
Unlike tactic expressions in ML, Isar proof methods provide proper
concrete syntax for additional arguments, options, modifiers etc.
Thus a typical method text is usually more concise than the
corresponding ML tactic. Furthermore, the Isar versions of classic
Isabelle tactics often cover several variant forms by a single
method with separate options to tune the behavior. For example,
method @{method simp} replaces all of @{ML simp_tac}~/ @{ML
asm_simp_tac}~/ @{ML full_simp_tac}~/ @{ML asm_full_simp_tac}, there
is also concrete syntax for augmenting the Simplifier context (the
current ``simpset'') in a convenient way.
*}
section {* Resolution tactics *}
text {*
Classic Isabelle provides several variant forms of tactics for
single-step rule applications (based on higher-order resolution).
The space of resolution tactics has the following main dimensions.
\begin{enumerate}
\item The ``mode'' of resolution: intro, elim, destruct, or forward
(e.g.\ @{ML resolve_tac}, @{ML eresolve_tac}, @{ML dresolve_tac},
@{ML forward_tac}).
\item Optional explicit instantiation (e.g.\ @{ML resolve_tac} vs.\
@{ML res_inst_tac}).
\item Abbreviations for singleton arguments (e.g.\ @{ML resolve_tac}
vs.\ @{ML rtac}).
\end{enumerate}
Basically, the set of Isar tactic emulations @{method rule_tac},
@{method erule_tac}, @{method drule_tac}, @{method frule_tac} (see
\secref{sec:tactics}) would be sufficient to cover the four modes,
either with or without instantiation, and either with single or
multiple arguments. Although it is more convenient in most cases to
use the plain @{method rule} method (see
\secref{sec:pure-meth-att}), or any of its ``improper'' variants
@{method erule}, @{method drule}, @{method frule} (see
\secref{sec:misc-meth-att}). Note that explicit goal addressing is
only supported by the actual @{method rule_tac} version.
With this in mind, plain resolution tactics correspond to Isar
methods as follows.
\medskip
\begin{tabular}{lll}
@{ML rtac}~@{text "a 1"} & & @{text "rule a"} \\
@{ML resolve_tac}~@{text "[a\<^sub>1, \<dots>] 1"} & & @{text "rule a\<^sub>1 \<dots>"} \\
@{ML res_inst_tac}~@{text "ctxt [(x\<^sub>1, t\<^sub>1), \<dots>] a 1"} & &
@{text "rule_tac x\<^sub>1 = t\<^sub>1 \<AND> \<dots> \<IN> a"} \\[0.5ex]
@{ML rtac}~@{text "a i"} & & @{text "rule_tac [i] a"} \\
@{ML resolve_tac}~@{text "[a\<^sub>1, \<dots>] i"} & & @{text "rule_tac [i] a\<^sub>1 \<dots>"} \\
@{ML res_inst_tac}~@{text "ctxt [(x\<^sub>1, t\<^sub>1), \<dots>] a i"} & &
@{text "rule_tac [i] x\<^sub>1 = t\<^sub>1 \<AND> \<dots> \<IN> a"} \\
\end{tabular}
\medskip
Note that explicit goal addressing may be usually avoided by
changing the order of subgoals with @{command "defer"} or @{command
"prefer"} (see \secref{sec:tactic-commands}).
*}
section {* Simplifier tactics *}
text {*
The main Simplifier tactics @{ML simp_tac} and variants (cf.\
\cite{isabelle-ref}) are all covered by the @{method simp} and
@{method simp_all} methods (see \secref{sec:simplifier}). Note that
there is no individual goal addressing available, simplification
acts either on the first goal (@{method simp}) or all goals
(@{method simp_all}).
\medskip
\begin{tabular}{lll}
@{ML asm_full_simp_tac}~@{text "@{simpset} 1"} & & @{method simp} \\
@{ML ALLGOALS}~(@{ML asm_full_simp_tac}~@{text "@{simpset}"}) & & @{method simp_all} \\[0.5ex]
@{ML simp_tac}~@{text "@{simpset} 1"} & & @{method simp}~@{text "(no_asm)"} \\
@{ML asm_simp_tac}~@{text "@{simpset} 1"} & & @{method simp}~@{text "(no_asm_simp)"} \\
@{ML full_simp_tac}~@{text "@{simpset} 1"} & & @{method simp}~@{text "(no_asm_use)"} \\
@{ML asm_lr_simp_tac}~@{text "@{simpset} 1"} & & @{method simp}~@{text "(asm_lr)"} \\
\end{tabular}
\medskip
*}
section {* Classical Reasoner tactics *}
text {*
The Classical Reasoner provides a rather large number of variations
of automated tactics, such as @{ML blast_tac}, @{ML fast_tac}, @{ML
clarify_tac} etc.\ (see \cite{isabelle-ref}). The corresponding
Isar methods usually share the same base name, such as @{method
blast}, @{method fast}, @{method clarify} etc.\ (see
\secref{sec:classical}).
*}
section {* Miscellaneous tactics *}
text {*
There are a few additional tactics defined in various theories of
Isabelle/HOL, some of these also in Isabelle/FOL or Isabelle/ZF.
The most common ones of these may be ported to Isar as follows.
\medskip
\begin{tabular}{lll}
@{ML stac}~@{text "a 1"} & & @{text "subst a"} \\
@{ML hyp_subst_tac}~@{text 1} & & @{text hypsubst} \\
@{ML strip_tac}~@{text 1} & @{text "\<approx>"} & @{text "intro strip"} \\
@{ML split_all_tac}~@{text 1} & & @{text "simp (no_asm_simp) only: split_tupled_all"} \\
& @{text "\<approx>"} & @{text "simp only: split_tupled_all"} \\
& @{text "\<lless>"} & @{text "clarify"} \\
\end{tabular}
*}
section {* Tacticals *}
text {*
Classic Isabelle provides a huge amount of tacticals for combination
and modification of existing tactics. This has been greatly reduced
in Isar, providing the bare minimum of combinators only: ``@{text
","}'' (sequential composition), ``@{text "|"}'' (alternative
choices), ``@{text "?"}'' (try), ``@{text "+"}'' (repeat at least
once). These are usually sufficient in practice; if all fails,
arbitrary ML tactic code may be invoked via the @{method tactic}
method (see \secref{sec:tactics}).
\medskip Common ML tacticals may be expressed directly in Isar as
follows:
\medskip
\begin{tabular}{lll}
@{text "tac\<^sub>1"}~@{ML_text THEN}~@{text "tac\<^sub>2"} & & @{text "meth\<^sub>1, meth\<^sub>2"} \\
@{text "tac\<^sub>1"}~@{ML_text ORELSE}~@{text "tac\<^sub>2"} & & @{text "meth\<^sub>1 | meth\<^sub>2"} \\
@{ML TRY}~@{text tac} & & @{text "meth?"} \\
@{ML REPEAT1}~@{text tac} & & @{text "meth+"} \\
@{ML REPEAT}~@{text tac} & & @{text "(meth+)?"} \\
@{ML EVERY}~@{text "[tac\<^sub>1, \<dots>]"} & & @{text "meth\<^sub>1, \<dots>"} \\
@{ML FIRST}~@{text "[tac\<^sub>1, \<dots>]"} & & @{text "meth\<^sub>1 | \<dots>"} \\
\end{tabular}
\medskip
\medskip @{ML CHANGED} (see \cite{isabelle-ref}) is usually not
required in Isar, since most basic proof methods already fail unless
there is an actual change in the goal state. Nevertheless, ``@{text
"?"}'' (try) may be used to accept \emph{unchanged} results as
well.
\medskip @{ML ALLGOALS}, @{ML SOMEGOAL} etc.\ (see
\cite{isabelle-ref}) are not available in Isar, since there is no
direct goal addressing. Nevertheless, some basic methods address
all goals internally, notably @{method simp_all} (see
\secref{sec:simplifier}). Also note that @{ML ALLGOALS} can be
often replaced by ``@{text "+"}'' (repeat at least once), although
this usually has a different operational behavior, such as solving
goals in a different order.
\medskip Iterated resolution, such as @{ML_text "REPEAT (FIRSTGOAL
(resolve_tac \<dots>))"}, is usually better expressed using the @{method
intro} and @{method elim} methods of Isar (see
\secref{sec:classical}).
*}
end